MATERIAL AND THERMAL ANALYSIS OF LASER SINTERTED PRODUCTS
Open Access
|Jan 2014References
- 1. Baojun ZHAO, Fazhong Shi, (2002), Modeling of Selective Laser Sintering for PC Powder, Journal of Beijing University of Aeronautics and Astronautics, Vol.28, No. 6, 660-663.
- 2. Contuzzi,N.,Campanelli,S.L., et al. (2011), 3D Finite element analysis in the selective laser melting process, Int. J. Simul Model, Vol. 10, No. 3, 113-121.
- 3. Jiang Wei, Dalgarno K.W., et al. (2002), Finite Element Analysis of Residual Stresses and Deformations in Direct Metal SLS Process, [cited on 2012-10-18], available at: http://edge.rit.edu/content/P10551/public/SFF/SFF%202002%20Proceedings/2002%20SFF%20Papers/38-Jiang.pdf
- 4. Jiangui Li, Yusheng Shi, et al. (2008), Numerical Simulation of Transient Temperature Field in Selective Laser Melting, China Mechanical Engineering, Vol 19, No. 20, 2492-2495.
- 5. Kolossov S., Boillat E., et al. (2004), 3D FE simulation for temperature evolution in the selective laser sintering process, International Journal of Machine Tools and Manufacture, Vol. 44, No. 2-3, 117-123.
- 6. Kruth J.P., Wang X., et al. (2003), Lasers and materials in selective laser sintering, Assembly Automation, Vol. 23, No. 4, 357 - 371.
- 7. Kulesza E., Dabrowski J.R., Sidun J., Neyman A., Mizera J. (2012) Fretting wear of materials - Methodological aspects of research, Acta Mechanica et Automatica, Vol. 6, No. 3, 58-61.
- 8. Lewis R. W., et al. (2004), Fundamentals of the Finite Element Method for Heat and Fluid Flow, Wiley, 356.
- 9. Lienhard IV, H. J., Lienhard V, H. J., (2012), A Heat Transfer Textbook, Fourth Edition, Phlogiston PressCambridge, Massachusetts, U.S.A.
- 10. Praslička D., Blažek J., Šmelko M., Hudák J., Čverha A., Mikita I., Varga R., Zhukov A., (2013), Possibilities of measuring stress and health monitoring in materials using contact-less sensor based on magnetic microwires, IEEE Transactions on Magnetics, 49 (1), art. no. 6392407, 128-131.
- 11. RadTherm® Heat Transfer Analysis Software, [cited on 2012-10-18], available at: http://www.thermoanalytics.com/products/radtherm
- 12. Sidun J., Da browski J.R., (2009), Bone ingrowth processes on porous metallic implants, Diffusion and Defect Data Pt.B: Solid State Phenomena, Volume 147-149, 776-781.
- 13. Simchi A. (2006), Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features, Materials Science and Engineering: A 428, Vol. 1, No. 2, 148-158.
- 14. SINTERING OF METALS. [cited on 2012-10-18], available at: http://www.substech.com/dokuwiki/doku.php?id=sinteringofmetals
- 15. Vozda M., Sekora M., Penhaker M., (2012), Precise Temperature Stabilizing System of Liquids for the Purpose Biomedical Alications, Journal Electronics and Electrical Engineering, Vol.18, No. 10, 29 - 32.
- 16. Wang X. C., Laoui T., et al. (2002), Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation, Int J Adv. Manuf. Technol., Vol.19, 351-357.
- 17. Zeng, K. Pal, D. Stucker, B. (2012), A review of thermal analysis methods in Laser Sintering and Selective Laser Melting, [cited on 2012-10-18], available at: http://utwired.engr.utexas.edu/lff/symposium/proceedingsArchive/pubs/Manuscripts/2012/2012-60-Zeng.pdf
- 18. Zhang D. Q., Cai Q. Z., et al. (2010), Select laser melting of W-Ni- Fe powders: simulation and experimental study, The International Journal of Advanced Manufacturing Technology, Vol. 51, No. 5-8, 649-658.
Language: English
Page range: 15 - 19
Published on: Jan 22, 2014
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2014 Radovan Hudák, Martin Šarik, Róbert Dadej, Jozef Živčák, Daniela Harachová, published by Bialystok University of Technology
This work is licensed under the Creative Commons License.