References
- Abanda, F.H., Manjia, M.B., Pettang, C., Tah, J.H., Nkeng, G.E. (2014) ‘Building information modelling in Cameroon: Overcoming existing challenges’, International Journal of 3-D Information Modeling (IJ3DIM), 3(4), pp. 1–25. https://doi.org/10.4018/IJ3DIM.2014100101
- Abubakar, M., Ibrahim, Y., Kado, D., Bala, K. (2014) ‘Contractors’ perception of the factors affecting Building Information Modelling (BIM) adoption in the Nigerian Construction Industry’, In: Computing in civil and building engineering, ASCE 2014, pp. 167–178. [online] Available at: https://itc.scix.net/pdfs/w78-2014-paper-022.pdf
- Adhikari, S., Meadati, P., Baek, M. (2020) ‘The Implementation of BIM Application in University Teaching: Case Study of a Construction Management Program’, In: ASEE’s Virtual Conference 2020, 29705.
- Ahmed, S. (2018) ‘Barriers to Implementation of Building Information Modeling (BIM) to the Construction Industry: A Review’, Journal of Civil Engineering and Construction, 7(2). https://doi.org/10.32732/jcec.2018.7.2.107
- Arunkumar, S., Suveetha, V., Ramesh, A. (2018) ‘A feasibility study on the implementation of building information modelling (BIM): from the architects’ & engineers’ perspective’, Asian Journal of Civil Engineering, 19, pp. 239-247. https://doi.org/10.1007/s42107-018-0020-9
- Azhar, S. (2011) ‘Building Information Modeling (BIM): Trends, Benefits, Risks, and Challenges for the AEC Industry’, Leadership and Management in Engineering, 11(3), pp. 241-252. https://doi.org/10.1061/(ASCE)LM.1943-5630.0000127
- Baba, H.D. (2010) ‘Building information modeling in local construction industry’, Universiti Teknologi Malaysia, Malaysia. [online] Available at: https://eprints.utm.my/15311/4/HammadDaboBabaMFKA2010.pdf
- Bender, D. (2010) ‘Implementing building information modelling in the top 100 architecture firms’, Journal of Building Information Modeling (JBIM), pp. 23–24. [online] Available at: https://www.brikbase.org/sites/default/files/PPages%20from%20jbim_spring10-5.bender.pdf
- Birkeland, J. (2009) ‘Eco-retrofitting with building-integrated living systems’, In: van den Dobbelsteen, A. (ed.) Proceedings of the 3rd CIB International Conference on Smart and Sustainable Built Environment, Delft University of Technology, Netherlands, pp. 1-9.
- Bouguerra, K., Lim, Y.W., Ali, K.N., Aljamal, A.J.A. (2019) ‘A pilot study: Investigation of the current practices and the feasibility of BIM implementation in Algerian AEC industry’, 1st International Graduate Conference of Built Environment and Surveying 2019 (GBES 2019), Johor, Malaysia.
- Bouguerra, K., Yaik-Wah, L., Ali, K.N. (2020) ‘A Preliminary Implementation Framework of Building Information Modelling (BIM) in the Algerian AEC Industry’, International Journal of Built Environment and Sustainability, 7(3), pp. 59-68. https://doi.org/10.11113/ijbes.v7.n3.554
- Brown, P. (2009) ‘CAD: Do computers aid the design process after all?’, Intersect, 2(1), pp. 52-66. [online] Available at: https://ojs.stanford.edu/ojs/index.php/intersect/article/view/117/33
- Burleson, W., Selker, T. (2002) ‘Creativity and interface’, Communications of the ACM, 45(10), pp. 88-90. https://doi.org/10.1145/570907.570938
- Cao, D., Li, H., Wang, G., Huang, T. (2017) ‘Identifying and contextualising the motivations for BIM implementation in construction projects: an empirical study in China’, International Journal of Project Management, 35(4), pp. 658-669. https://doi.org/10.1016/j.ijproman.2016.02.002
- Chan, C.T.W. (2014) ‘Barriers of implementing BIM in the construction industry from the designers’ perspective: A Hong Kong experience’, Journal of System and Management Sciences, 4(2), pp. 24–40. [online] Available at: https://www.aasmr.org/jsms/Vol4/No.2/JSMS_VOL4_NO2_003.pdf
- Chan, D.W.M., Olawumi, T.O., Ho, A.M.L. (2019) ‘Perceived benefits of and barriers to Building Information Modelling (BIM) implementation in construction: The case of Hong Kong’, Journal of Building Engineering, Vol. 25, 100764. https://doi.org/10.1016/j.jobe.2019.100764
- Chen, Y., Dib, H., Cox, R.F., Manoosingh, C., Maghiar, M. (2017) ‘Descriptive Comparison of Academics’ and Practitioners’ Perceptions of Key BIM Maturity Indicators’, In: ICCREM 2016: BIM Application and Off-Site Construction, American Society of Civil Engineers, Reston, USA, pp. 11–19.
- Chileshe, N., Hosseini, M.R., Jepson, J. (2016) ‘Critical barriers to implementing risk assessment and management practices (RAMP) in the Iranian construction sector’, Journal of construction in developing countries, 21(2), pp. 81-112. https://doi.org/10.21315/jcdc2016.21.2.5
- Chileshe, N., Rameezdeen, R., Hosseini, M.R., Lehmann, S. (2015) ‘Barriers to implementing reverse logistics in South Australian construction organisations’, Supply chain management, 20(2), pp. 179–204. https://doi.org/10.1108/SCM-10-2014-0325
- Chiponde, D.B., Mutale, L.P., Ziko, J.M., Jalo, N. (2017) ‘Assessing the feasibility of using building information modelling (BIM) to improve collaboration on public sector projects in the Zambian construction industry’, WIT Transactions on the Built Environment, Vol. 169, pp. 191–199. https://www.doi.org/10.2495/BIM170181
- Christopher, A.M., Daniel, O. (2023) ‘Assessing the State of Building Information Modeling (BIM) Education in the Architecture Department of KNUST’, International Journal of Research Publication and Reviews, 4(6), pp. 2829-2836. https://doi.org/10.55248/gengpi.4.623.45327
- Daniel, W.W., Cross, C.L. (2018) ‘Biostatistics: a foundation for analysis in the health sciences’, Wiley, USA.
- Denzer, A.S., Hedges, K.E. (2008) ‘From CAD to BIM: Educational strategies for the coming paradigm shift’, In: AEI 2008: Building Integration Solutions, pp. 1–11. https://doi.org/10.1061/41002(328)6
- Dib, H., Chen, Y., Cox, R.F. (2012) ‘A framework for measuring building information modeling maturity in construction projects’, Proceedings of the CIB W78 2012: 29th International Conference –Beirut, Lebanon. [online] Available at: https://itc.scix.net/pdfs/w78-2012-Paper-34.pdf
- Eadie, R., Odeyinka, H., Browne, M., McKeown, C., Yohanis, M. (2013) ‘An analysis of the drivers for adopting building information modelling’, Journal of Information Technology in Construction, Vol. 18, pp. 338–352. [online] Available at: https://www.itcon.org/papers/2013_17.content.05654.pdf
- Eastman, C., Teicholz, P., Sacks, R., Liston, K. (2011) ‘BIM handbook: A guide to building information modelling for owners, managers, designers, engineers and contractors’, John Wiley & Sons, USA.
- Gerges, M., Austin, S., Mayouf, M., Ahiakwo, O., Jaeger, M., Saad, A., El Gohary, T. (2017) ‘An investigation into the implementation of Building Information Modeling in the Middle East’, Journal of Information Technology in Construction, 22, pp. 1–15. [online] Available at: https://www.itcon.org/papers/2017_01-ITcon-Gerges.pdf
- Gu, N., London, K. (2010) ‘Understanding and facilitating BIM adoption in the AEC industry’, Automation in Construction, Automation in Construction, 19(8), pp. 988–999. https://doi.org/10.1016/j.autcon.2010.09.002
- Hosseini, M.R., Azari, E., Tivendale, L., Banihashemi, S., Chileshe, N. (2016) ‘Building Information Modeling (BIM) in Iran: An Exploratory Study’, Journal of Engineering, Project, and Production Management, 6(2), pp. 78-89. https://doi.org/10.32738/JEPPM.201607.0002
- Hosseini, M.R., Azari, E., Tivendale, L., Chileshe, N. (2015) ‘Barriers to adoption of building information modelling (BIM) in Iran: Preliminary results’, Proceedings of the 6th International Conference on Engineering, Project, and Production Management (EPPM 2015), pp. 384-394. [online] Available at: https://app.cafeprozhe.com/storage/files/project/uQYXRywK2TsXNzZGwq8Dwf4NpxRg1z3bBwfl6GTu.pdf
- Jamal, K.A.A., Mohammad, M.F., Hashim, N., Mohamed, M.R., Ramli, M.A. (2019) ‘Challenges of building information modelling (BIM) from the Malaysian architect’s perspective’, MATEC Web Conf, 266, 05003, International Conference on Built Environment and Engineering 2018 - “Enhancing Construction Industry Through IR4.0” (IConBEE2018). https://doi.org/10.1051/matecconf/201926605003
- Jin, R., Hancock, C., Tang, L., Chen, C., Wanatowski, D., Yang, L. (2017) ‘Empirical Study of BIM Implementation–Based Perceptions among Chinese Practitioners’, Journal of Management in Engineering, 33(5). https://doi.org/10.1061/(ASCE)ME.1943-5479.0000538
- Jin, R., Tang, L., Fang, K. (2015) ‘Investigation of the current stage of BIM application in China’s AEC industries’, WIT Transactions on the Built Environment, Vol. 149, pp. 493-503. [online] Available at: https://www.wit-press.com/Secure/elibrary/papers/BIM15/BIM15040FU1.pdf
- Jin, R., Yang, T., Piroozfar, P., Kang, B.G., Wanatowski, D., Hancock, C.M., Tang, L. (2018) ‘Project-based pedagogy in interdisciplinary building design adopting BIM’, Engineering, Construction and Architectural Management, 25(10), pp. 1376-1397. https://doi.org/10.1108/ECAM-07-2017-0119
- Jin, R., Zou, P.X., Li, B., Piroozfar, P., Painting, N. (2019) ‘Comparisons of students’ perceptions on BIM practice among Australia, China and the UK’, Engineering, Construction and Architectural Management, 26(9), pp. 1899-1923. https://doi.org/10.1108/ECAM-07-2018-0275
- Khairool Aizat, A.J., Mohammad Fadhil, M., Norfashiha, H., Mohamed Rizal, M., Mohd Adib, R. (2019) ‘Challenges of Building Information Modelling (BIM) from the Malaysian Architect’s Perspective’, International Conference on Built Environment and Engineering 2018 - “Enhancing Construction Industry Through IR4.0” (IConBEE2018), MATEC Web of Conferences, Vol. 266, 05003. https://doi.org/10.1051/matecconf/201926605003
- Kim, S.-Y., Lee, Y.-S., Nguyen, V.T., Luu, V.T. (2016) ‘Barriers to applying value management in the Vietnamese construction industry’, Journal of Construction in Developing Countries, 21(2), pp. 55-80. https://dx.doi.org/10.21315/jcdc2016.21.2.4
- Kumar, J.V., Mukherjee, M. (2009) ‘Scope of building information modelling (BIM) in India’, Journal of Engineering Science and Technology Review, 2(1), pp. 165–169. [online] Available at: http://jestr.org/downloads/volume2/fulltext2909.pdf
- Latiffi, A.A., Mohd, S., Rakiman, U.S. (2015) ‘Potential improvement of building information modelling (BIM) implementation in Malaysian construction projects’, In: Bouras, A., Eynard, B., Foufou, S., Thoben, K.D. (eds.) Product Lifecycle Management in the Era of Internet of Things (PLM 2015), IFIP Advances in Information and Communication Technology, Vol. 467, Springer, Cham, Switzerland, pp. 149–158. https://doi.org/10.1007/978-3-319-33111-9_14
- Lawson, B. (2002) ‘CAD and creativity: does the computer really help?’, Leonardo, 35(3), pp. 327-331. https://doi.org/10.1162/002409402760105361
- Liu, N., Ruan, L., Jin, R., Chen, Y., Deng, X., Yang, T. (2019) ‘Investigation of individual perceptions towards BIM implementation-a Chongqing case study’, Engineering, Construction and Architectural Management, 26(7), pp. 1455-1475. https://doi.org/10.1108/ECAM-08-2018-0342
- Liu, S., Xie, B., Tivendal., L., Liu, C. (2015) ‘Critical Barriers to BIM Implementation in the AEC Industry’, International Journal of Marketing Studies, 7(6). https://doi.org/10.5539/ijms.v7n6p162
- Marzouk, M., Elsaay, H., Othman, A.A.E. (2021) ‘Analysing BIM implementation in the Egyptian construction industry’, Architectural Engineering, 29(10), pp. 4177-4190. https://doi.org/10.1108/ECAM-07-2020-0523
- Mehran, D. (2016) ‘Exploring the adoption of BIM in the UAE construction industry for AEC firms’, Procedia Engineering, Vol. 145, pp. 1110–1118. https://doi.org/10.1016/j.proeng.2016.04.144
- Memon, A.H., Rahman, I.A., Memon, I., Azman, N.I.A. (2014) ‘BIM in the Malaysian construction industry: Status, advantages, barriers and strategies to enhance the implementation level’, Research journal of applied sciences, engineering and technology, 8(5), pp. 606–614. http://dx.doi.org/10.19026/rjaset.8.1012
- Monko, R.J., Roider, E.M. (2014) ‘Baseline Knowledge and Perceptions of Building Information Modeling in Tanzania’, International Journal of Architecture, Engineering and Construction, 3(1), pp. 10-26.
- Naing, L., Winn, T., Rusli, B.N. (2006) ‘Practical issues in calculating the sample size for prevalence studies’, Archives of Orofacial Sciences, 1, pp. 9–14. [online] Available at: https://aos.usm.my/docs/Vol_1/09_14_ayub.pdf
- Nanajkar, A. (2014) ‘Implementing building information modelling (BIM) at AEC firms in India’, Master Thesis, North Dakota State University of Agriculture and Applied Science. [online] Available at: https://core.ac.uk/download/pdf/211305694.pdf
- Nawari, N.O., Alsaffar, A. (2016) ‘Planning and development of BIM curriculum for Kuwait’, Journal of Civil Engineering and Science (JCES), 5(1), pp. 15–32. https://www.doi.org/10.5963/JCES0501003
- NBS (2013) ‘National BIM Report 2013’, RIBA Enterprises Ltd, Newcastle Upon Tyne, UK. [online] Available at: https://greenbuildingencyclopaedia.uk/wp-content/uploads/2015/11/NBS-NationlBIMReport2013-single.pdf
- NBS (2014) ‘National BIM Report 2014’, RIBA Enterprises Ltd, Newcastle Upon Tyne, UK. [online] Available at: https://www.thenbs.com/-/media/uk/files/pdf/nbs-national-bim-report-2014.pdf?la=en
- NBS (2018) ‘National BIM Report 2018’, RIBA Enterprises Ltd, Newcastle Upon Tyne, UK. [online] Available at: https://www.thenbs.com/-/media/uk/files/pdf/nbs-national-bim-report-2018.pdf?la=en
- NBS (2019) ‘National BIM Report 2019’, RIBA Enterprises Ltd, Newcastle Upon Tyne, UK. [online] Available at: https://www.thenbs.com/knowledge/national-bim-report-2019
- Olawumi, T.O., Chan, D.W. (2018) ‘Beneficial factors of integrating building information modelling (BIM) and sustainability practices in construction projects’, In: Hong Kong International Conference on Engineering and Applied Science (HKICEAS), 2018(1), pp. 141-152. http://dx.doi.org/10.6084/m9.figshare.19758844
- Robertson, B.F., Walther, J., Radcliffe, D.F. (2007) ‘Creativity and the Use of CAD Tools: Lessons for Engineering Design Education from Industry’, Journal of Mechanical Design, 129(7), pp. 753–760. https://doi.org/10.1115/1.2722329
- Sah, V., Cory, C. (2008) ‘Building information modelling: An academic perspective’, In: Proceedings of the IAJC-IJME 2008 Conference, Technology Interface Journal, 10(2). [online] Available at: https://tiij.org/issues/issues/winter09/Winter09/cory.pdf
- Saka, A.B., Chan, D.W.M. (2019) ‘A scientometric review and meta-synthesis of building information modelling (BIM) research in Africa’, Buildings, 9(4), 85. https://doi.org/10.3390/buildings9040085
- Salman, H. (2013) ‘Preparing architectural technology students for BIM 2016 mandate’, In: Kouider, T. (ed.) Proceedings of the 4th International congress on architectural technology (ICAT 2013): architectural technology: the defining features, Sheffield, UK, pp. 142-158.
- Shelden, D. (2009) ‘Information Modelling as a Paradigm Shift’, Architectural Design, 79(2), pp. 80-83. https://doi.org/10.1002/ad.857
- Smith, D.K., Tardif, M. (2009) ‘Building information modelling: a strategic implementation guide for architects, engineers, constructors, and real estate asset managers’, John Wiley & Sons, USA. https://www.doi.org/10.1002/9780470432846
- Tehami, M., Seddiki, M. (2023) ‘Investigation toward the adoption of building information modelling in Algeria from architects’ perspective’, Journal of construction in developing countries, 28(2), pp. 329-352. https://doi.org/10.21315/jcdc-08-22-0148
- Unver, E. (2006) ‘Strategies for the transition to CAD-based 3D Design Education’, Computer-Aided Design and Applications, 3(1-4), pp. 323–330. [online] Available at: https://www.cad-journal.net/files/vol_3/CAD_3(1-4)_2006_323-330.pdf
- Van Roy, A.F., Firdaus, A. (2020) ‘Building Information Modelling (BIM) in Indonesia: Knowledge, Implementation, and Barriers’, Journal of Construction in Developing Countries, 25(2), pp. 199-217. [online] Available at: http://web.usm.my/jcdc/vol25_2_2020/jcdc2020.25.2.8.pdf
- Wu, W., Issa, R.R. (2013) ‘BIM education for new career options: an initial investigation’, In: Proceedings of the 2013 BIM Academic Workshop, Washington, USA. http://dx.doi.org/10.13140/2.1.3570.2406
- Yan, H., Damian, P. (2008) ‘Benefits and barriers of building information modelling’, In: Ren, A., Ma, Z., Lu, X. (eds.) Proceedings of the 12th International Conference on Computing in Civil and Building Engineering (ICCCBE XII) & 2008 International Conference on Information Technology in Construction (INCITE 2008), Beijing, China. [online] Available at: https://hdl.handle.net/2134/23773
- Yuksel, N., Kanik, A.E., Baykara, T. (2000) ‘Comparison of in vitro dissolution profiles by ANOVA-based, model-dependent and-independent methods’, International journal of pharmaceutics, 209(1-2), pp. 57–67. https://doi.org/10.1016/s0378-5173(00)00554-8
- Zahrizan, Z., Ali, N.M., Haron, A.T., Marshall-Ponting, A., Hamid, Z.A. (2013) ‘Exploring the adoption of Building Information Modelling (BIM) in the Malaysian construction industry: A qualitative approach’, International Journal of Research in Engineering and Technology, 2(8), pp. 384–395. [online] Available at: https://ijret.org/volumes/2013v02/i08/IJRET20130208060.pdf
- Zou, P.X.W., Xu, X., Jin, R., Painting, N., Li, B. (2019) ‘AEC students’ perceptions of BIM practice at the Swinburne University of Technology’, Journal of professional issues in engineering education and practice, 145(3), 05019002. https://doi.org/10.1061/(ASCE)EI.1943-5541.0000410