References
- Al-Ansari, T., Alherbawi, M. (2020) “Optimising multi biomass feedstock utilisation considering a multi technology approach, “Computer Aided Chemical Engineering, Vol. 48, pp. 1633–1638. http://dx.doi.org/10.1016/B978-0-12-823377-1.50273-1
- Al-Tamimi, N.A.M. (2011) “Impact of Building Envelope Modifications on the Thermal Performance of Glazed High-Rise Residential Buildings in the Tropics” (PhD thesis), Universiti Sains Malaysia, Penang, Malaysia. [online] Available at: http://eprints.usm.my/45708/
- ANSI/ASHRAE Standard 55 (2020) “Thermal environmental conditions for human occupancy”, ASHRAE, Georgia, USA.
- ANSI/ASHRAE/IES Standard 90.1. (2010) “Energy standard for buildings except low-rise residential buildings”, ASHRAE, Georgia, USA.
- ANSI/ASHRAE/IES Standard 90.1. (2017) “Energy standard for buildings except low-rise residential buildings”, ASHRAE, Georgia, USA.
- Anthony, S., Ogheneyoma, P., Heritage, P., Ayoola O., Fiyinfoluwa, A. (2020) “Daylight Penetration in Buildings: Issues in Tropical Climates”, Solid State Technology, 63(2), pp. 276–285.
- Anumah, J.J., Anumah, L. (2017) “Building Orientation; Enhancing Nature with Nature”, Journal of Applied Sciences & Environmental Sustainability, 3(7), pp. 29–35.
- Arnfield, A.J. (2016) “Climate classification”, Encyclopedia Britannica. [online] Available at: https://www.britannica.com/topic/classification-1703397
- Atkinson, G.A. (1953) “Tropical architecture and building standards”, Conference on tropical architecture, University College, London, UK.
- Budhiyanto, A. (2017) “The effect of the window-to-wall ratio on cooling energy usage and comfort temperature”, Journal of Architecture and Built Environment, 44(2), pp. 189–194. http://dx.doi.org/10.9744/dimensi.44.2.189-194
- Bureau of Energy (2017) “Efficiency Energy Conservation Building Code”, Government of India, Ministry of Power, Bureau of Energy Efficiency, New Delhi, India. [online] Available at: https://beeindia.gov.in/sites/default/files/BEE_ECBC%202017.pdf
- Chinazzo, G., Wienold, J., Andersen, M. (2019) “Daylight affects human thermal perception”, Scientific Reports, Vol. 9, 13690. https://doi.org/10.1038/s41598-019-48963-y
- Coello, C.A.C. (2005) “Twenty years of evolutionary multi-objective optimisation: a historical view of the field”, Computational Intelligence Magazine, 1(1), pp. 28–36.
- Djamila, H. (2018) “Review on Koppen-Geiger system for indoor thermal comfort review on Koppen-Geiger system for indoor thermal comfort”, International Journal of Engineering Innovation and Research, 7(4), pp. 220–225.
- Fan, X., Liu, M., Tang, S., Zong, X. (2023) “Integrated daylight and thermal comfort evaluation for tropical passive gymnasiums based on the perspective of exercisers,” Energy and Buildings, Vol. 300, 113625. https://doi.org/10.1016/j.enbuild.2023.113625
- Galal, K.S. (2018) "The impact of atriums on thermal and daylighting performance," Architecture and Planning Journal, 24(1), 4. https://doi.org/10.54729/2789-8547.1019
- George, D., Mallery, M. (2010) “SPSS for Windows Step by Step: A Simple Guide and Reference, 17.0 update (10a ed.)”, Pearson, Boston, USA.
- Goel, S., Rosenberg, M., Athalye, R., Xie, Y., Wang, W., Hart, R., Mendon, V. (2014) “Enhancements to ASHRAE standard 90.1 prototype building models“, U.S. Pacific Northwest National Laboratory, Richland, USA.
- Hakim, F.N., Muhamadinah, Y., Atthaillah, Mangkuto, R.A., Sudarsono, A.S., (2021) “Building Envelope Design Optimization of a Hypothetical Class-roo Considering Energy Consumption, Daylighting, and Thermal Comfort: Case Study in Lhokseumawe, Indonesia”, International Journal of Technology, 12(6), pp. 1217–1227. https://doi.org/10.14716/ijtech.v12i6.5203
- Hien, W.N., Istiadji, A.D. (2003) “Effects of External Shading Devices on Daylighting and Natural Ventilation”, Eighth International IBPSA Conference, Eindhoven, Netherlands.
- Huberty, C.J., Petoskey, M.D. (2000) “Multivariate analysis of variance and covariance”, In: H.E.A. Tinsley, S.D. Brown (Eds.), Handbook of applied multivariate statistics and mathematical modelling, Academic Press, Elsevier, pp. 183–208. https://doi.org/10.1016/B978-012691360-6/50008-2
- IEA (2019) “International Energy Conservation Code 2012 (IECC 2012)”, IEA 50, USA. [online] Available at: https://www.iea.org/policies/7191-international-energy-conservation-code-2012-iecc-2012
- IES (2022) “Monitoring procedures for the assessment of daylighting performance of buildings”, IEA SHC TASK 21 / ECBS ANNEX 29.
- ISO 7730 (2005) “Ergonomics of the thermal environment: Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria”, ISO, Geneva, Switzerland.
- Kamel, E., Memari, A.M. (2018) “Automated Building Energy Modelling and Assessment tool”, Energy, Vol. 147, pp. 15–24. https://doi.org/10.1016/j.energy.2018.01.023
- Kandar, M.Z., Sulaiman, M.S., Rashid, Y.R., Ossen, D.R., MAbdullah, A., Wah, L.Y., Nikpour, M. (2011) “Investigating daylight quality in Malaysian government office buildings through daylight factor and surface luminance”, International Journal of Civil and Environmental Engineering, 5(11), pp. 589-594. https://doi.org/10.5281/zenodo.1062582
- Kim, J., de Dear, R., Candido, C., Zhang, H., Arens, E. (2013) “Gender differences in office occupant perception of indoor environmental quality (IEQ)”, Building and Environment, Vol. 70, pp. 245–256. https://doi.org/10.1016/j.buildenv.2013.08.022
- Kivunja, C. (2018) “Distinguishing between theory, theoretical framework, and conceptual framework: A Systematic review of lessons from the Field”, International Journal of Higher Education, 7(6), pp. 44–53. https://doi.org/10.5430/ijhe.v7n6p
- Koenigsberger, O.H., Ingersoll, T.G., Mayhew, A., Szokolay S.V. (1973, e-edition, 2013) “Manual of Tropical Housing and Building Climatic Design”, Universities Press London, UK.
- Liu, Y., Wang, W., Li, Z., Song, J., Fang, Z., Pang, D., Chen, Y. “Daylighting Performance and Thermal Comfort Performance Analysis of West-Facing External Shading for School Office Buildings in Cold and Severe Cold Regions of China”, Sustainability, 15(19), 14458. https://doi.org/10.3390/su151914458
- Mahmoudi Saber, E., Chaer, I., Ekpeti, B. (2015) “Harnessing Daylighting and Solar Gains as Sustainable Architectural Design methods in Mixed-Use Developments in Lagos, Nigeria”, CIBSE Technical Symposium, London, UK, pp. 16–17.
- Makela, E.J., Williamson, J.L., Makela, E.B. (2011) “Comparison of standard 90.1-2010 and the 2012 IECC with respect to commercial buildings”, Pacific Northwest National Laboratory, Richland, USA.
- McGee, C. (2013) “Orientation”, Australia’s guide to environmentally sustainable homes, YourHome. [online] Available at: https://www.yourhome.gov.au/passive-design/orientation
- Mobolade, T.D., Pourvahidi, P. (2020) “Bioclimatic Approach for Climate Classification of Nigeria”, Sustainability, 12(10), 4192, pp. 1–23. https://doi.org/10.3390/su12104192
- Mohamed, K.A., Ismail, A., Ahmad, N.A. (2020) “The effects of internal partition on indoor daylighting performance of student residential building in Ipoh, Perak”, Malaysian Journal of Sustainable Environment, 7(2), pp. 1–24. https://doi.org/10.24191/myse.v7i2.10261
- Musa, M.A. (2022) “A Framework for Enhancing Passive Indoor Thermal and Daylighting in Multi-Storey Office Buildings in the Temperate Dry Climate of Nigeria” (unpublished PhD Thesis), Department of Architecture, Ahmadu Bello University, Zaria, Nigeria.
- Musa, M.A. (2023) “Influence of Building Spatial Layout on Passive Indoor Thermal and Daylighting in Midrise-Office Building in Temperate Dry Climate of Nigeria“, In: Proceedings of the III. International Architecture Symposium, Diyarbakır, Türkiye, pp. 184–191. [online] Available at: https://www.iksadkongre.com/dumimarliksempozyumu3
- Nasrollahzadeh, N. (2021) “Comprehensive building envelope optimization: Improving energy, daylight, and thermal comfort performance of the dwelling unit”, Journal of Building Engineering, Vol. 44, 103418. https://doi.org/10.1016/j.jobe.2021.103418
- NYC (2014) “2014 Energy Conservation Code”, NYC Buildings, City of New York. [online] Available at: https://www.nyc.gov/site/buildings/codes/2014-energy-conservation-code.page
- Ochedi, E.T., Taki, A. (2022) “A framework approach to the design of energy efficient residential buildings in Nigeria”, Energy and Built Environment, 3(3), pp. 384–397. https://doi.org/10.1016/j.enbenv.2021.07.001
- Odunfa, K.M., Nnakwe, C.J., Odunfa, V.O. (2018) “Building Energy Efficiency in Nigeria Major Climatic Zones”, Journal of Building Construction and Planning Research, 6(4), pp. 22–33.
- Ravitch, S.M., Riggan, M. (2017) “Reason & Rigor: How conceptual frameworks guide research”, 2nd edition, Sage, Thousand Oaks, California, USA, pp. 32–61.
- Ritter, M. (2019) “Climate Classification”, Earth Online Media. [online] Available at: https://www.earthonlinemedia.com/ebooks/tpe_3e/climate_systems/climate_classification.html
- Salem Bahdad, A.A., Syed Fadzil, S.F., Onubi, H.O., BenLasod, S.A. (2022) “Balancing daylight in office spaces with respect to the indoor thermal environment through optimization of light shelves design parameters in the tropics”, Indoor and Built Environment, 31(7), pp. 1963–1985. https://doi.org/10.1177/1420326X221086537
- Sasu, A., Abedi Asante, L., Gavu, E.K. (2016) “Physical Access for Persons with Disability in Rented Houses in Kumasi, Ghana: Evidence from Compound Houses in Selected Neighborhoods in the Metropolis”, Developing Country Studies, 6(3), pp. 60–75.
- Shebl, S.S. (2007) “Effect of window to wall ratio and different climate conditions on energy consumption for Residential and Commercial Buildings in Egypt”, Housing and Building National Research Center Journal, 3(2), pp. 115-126.
- SOLID GREEN (2017) “Development of the national Building Energy Efficiency Code (BEEC): Technical study”, Federal Ministry of Power, Works and Housing (Housing Sector), Abuja, Nigeria. [online] Available at: https://www.worksandhousing.gov.ng/themes/front_end_themes_01/images/download/1510059611415.pdf
- St Clair, P. (2009) “Low-energy design in the United Arab Emirates - Drivers and urban design principles”, Environment Design Guide, Vol. 29, pp. 1–9. [online] Available at: https://www.jstor.org/stable/26151847
- Sukreet, S., Kensek, K. (2014) “Early design analysis using optimisation techniques in design/practice”, ASHRAE/IBPSA, USA.
- Szokolay, S.V. (2008) “Introduction to architectural science: The basis of sustainable design”, Elsevier, Oxford, UK.
- Wang, Z., Fu, Y., Gao, W. (2024) “The crossed and interaction effects of indoor light and thermal factors on human perceptions”, Developments in the Built Environment, Vol. 17, 100339. https://doi.org/10.1016/j.dibe.2024.100339
- Xue, P., Mak, C.M., Cheung, H.D. (2014) “The effects of daylighting and human behavior on luminous comfort in residential buildings: A questionnaire survey”, Building and Environment, Vol. 81, pp. 51–59. https://doi.org/10.1016/j.buildenv.2014.06.011
- Zhang, J., Ji, L. (2022) “Daylighting, and Thermal Comfort of Buildings in Tropical Areas”, Advances in Civil Engineering, 178269, pp. 1-14. https://doi.org/10.1155/2022/3178269
- Zoure, A.N., Genovese, P.V. (2022) “Development of Bioclimatic Passive Designs for Office Building in Burkina Faso”, Sustainability, 14(17), 4332, pp. 1–23. https://doi.org/10.3390/su14074332
- Zulkarnain, A.Z, Mohd Saleh, M.N., Aziz, A. (2021) “Thermal-daylighting balance through building shading devices: A review on factors and methods“, Malaysian Journal of Sustainable Environment, 8(2), pp. 157–178. https://doi.org/10.24191/myse.v8i3.15894