Influence of Basic 3D Printing Parameters on Mechanical Properties pf PLA Biopolymer Prints by FDM Method
References
- 06-Material Voraussetzungen. (n.d.). ARTME 3D. Retrieved July 30, 2025, from https://www.artme-3d.de/produkte/desktop-filament-extruder-mk3s/06-material-requirements/
- Avinc, O., & Khoddami, A. (2009). Overview of Poly(lactic acid) (PLA) Fibre. Fibre Chemistry, 41(6), 391–401. https://doi.org/10.1007/s10692-010-9213-z
- Chávez Mendiola, E., Rivera Nieblas, J., Grijalva Acuña, J. C., Acedo-Ruiz, R., Jimenez Lopez, E., & Peinado-Gonzalez, J. (2025). Análisis de elemento finito a eslabones de robot didáctico impreso en 3D. 3, 35–43.
- Crisostomo, J. L. B., & Dizon, J. R. C. (2021). 3D Printing Applications in Agriculture, Food Processing, and Environmental Protection and Monitoring. Advance Sustainable Science, Engineering and Technology, 3(2), 0210201. https://doi.org/10.26877/asset.v3i2.9627
- Desktop Filament Extruder MK3S und MK3S+ Archive. (n.d.). ARTME 3D. Retrieved August 18, 2025, from https://www.artme-3d.de/produkte/desktop-filament-extruder-mk3s/
- García-Domínguez, A., Claver, J., & Sebastián, M. A. (2019). Infill optimization for pieces obtained by 3D printing. Procedia Manufacturing, 41, 193–199.
- Hsueh, M.-H., Lai, C.-J., Wang, S.-H., Zeng, Y.-S., Hsieh, C.-H., Pan, C.-Y., & Huang, W.-C. (2021). Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling. Polymers, 13(11), Article 11. https://doi.org/10.3390/polym13111758
- Huang, Y., Müller, M. T., Boldt, R., Zschech, C., Gohs, U., & Wießner, S. (2021). A new strategy to improve viscoelasticity, crystallization and mechanical properties of polylactide. Polymer Testing, 97, 107160. https://doi.org/10.1016/j.polymertesting.2021.107160
- Iftekar, S. F., Aabid, A., Amir, A., & Baig, M. (2023). Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review. Polymers, 15(11), Article 11. https://doi.org/10.3390/polym15112519
- İncesu, R., & Akderya, T. (2024). The Influence of Printing Speed and Temperature on the Mechanical, Absorptive, and Morphological Properties of PLA-Based Hybrid Materials Produced with an FDM-Type 3D Printer. Polymers, 16(19), Article 19. https://doi.org/10.3390/polym16192771
- Jaworska, N., & Podsiadło, H. (2019). Technologia druku 3D jako szansa dla środowiska naturalnego. Acta Poligraphica, 14. https://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-c9f05946-4dda-4200-a669-a3d3a4530987/c/AP2019_14_Jaworska_Podsiadlo.pdf
- K2 Plus Combo. (n.d.). Creality. Retrieved July 30, 2025, from https://www.creality.com/products/creality-k2-plus-cfs-combo
- Kantaros, A., Katsantoni, M., Ganetsos, T., & Petrescu, N. (2025). The Evolution of Thermoplastic Raw Materials in High-Speed FFF/FDM 3D Printing Era: Challenges and Opportunities. Materials, 18(6), Article 6. https://doi.org/10.3390/ma18061220
- Katunin, A., Wacławik, E., & Bilewicz, M. (2016). Wpływ parametrów technologicznych na właściwości eksploatacyjne elementów wytwarzanych techniką przyrostową FDM. Przetwórstwo Tworzyw, 22. https://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-366b0244-d060-4905-a20b-ac5b3cdfe22f
- Kmošek, J. (2022, December 9). Druk 3D w motoryzacji: Jak to zrobiła Škoda Auto. Original Prusa 3D Printers. https://blog.prusa3d.com/pl/druk-3d-w-motoryzacji-jak-to-zrobila-skoda-auto_73147/
- Lorkowski, L., Wybrzak, K., Brancewicz-Steinmetz, E., Świniarski, J., & Sawicki, J. (2025). Influence of Print Speed on the Mechanical Performance of 3D-Printed Bio-Polymer Polylactic Acid. Materials, 18(8), Article 8. https://doi.org/10.3390/ma18081765
- Mazur, J., Sobczak, P., Panasiewicz, M., Łusiak, P., Krajewska, M., Findura, P., Obidziński, S., & Żukiewicz-Sobczak, W. (2025). Mechanical properties and biodegradability of samples obtained by 3D printing using FDM technology from PLA filament with by-products. Scientific Reports, 15(1), 5847. https://doi.org/10.1038/s41598-025-89984-0
- McMullen, R., Gorcea, M., & Chen, S. (2014). Emulsions and their characterization by texture profile analysis (pp. 131–154).
- Original Desktop Filament Extruder MK3S (DIY KIT). (n.d.). ARTME 3D. Retrieved September 6, 2025, from https://artme-3d.shop/products/original-desktop-filament-extruder-mk3s-full-diy-kit
- Tartakowski, Z., & Mydłowska, K. (2015). Właściwości mechaniczne wyrobów wytworzonych technologią FDM. Przetwórstwo Tworzyw, 21(2 (164), 171–175.
- TA.XTplus Texture Analyser | Stable Micro Systems Products. (n.d.). Retrieved August 18, 2025, from https://www.stablemicrosystems.com/TAXTplus.html
- Team, P. R. C. (2023, May 12). Dzięki drukowi 3D znów może chodzić: Wyjątkowa operacja w Szpitalu Uniwersyteckim w Brnie. Original Prusa 3D Printers. https://blog.prusa3d.com/pl/dzieki-drukowi-3d-znow-moze-chodzic-wyjatkowa-operacja-w-szpitalu-uniwersyteckim-w-brnie_77316/
- Wang, S., Chen, X., Han, X., Hong, X., Li, X., Zhang, H., Li, M., Wang, Z., & Zheng, A. (2023). A Review of 3D Printing Technology in Pharmaceutics: Technology and Applications, Now and Future. Pharmaceutics, 15(2), Article 2. https://doi.org/10.3390/pharmaceutics15020416
DOI: https://doi.org/10.2478/agriceng-2026-0010 | Journal eISSN: 2449-5999 | Journal ISSN: 2083-1587
Language: English
Page range: 141 - 161
Submitted on: Oct 1, 2025
Accepted on: Apr 1, 2026
Published on: Jul 2, 2026
Published by: Polish Society of Agricultural Engineering
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Adrian Stelmachowicz, Jacek Mazur, Paweł Cwalina, Sławomir Obidziński, Lucia Boszorádová, published by Polish Society of Agricultural Engineering
This work is licensed under the Creative Commons Attribution 4.0 License.