References
- Ann Josy, T., Sadique, A., Thomas, M., Manaf T. M. A. & Vr, S. (2025). Software Architecture for Autonomous Vehicles using MATLAB Simulink. SAE Technical Paper, 2025-28-0190. 2025. https://doi.org/10.4271/2025-28-0190.
- Ágoston, G., & Madlenák, R. (2020). Road safety macro assessment model: Case study for Hungary. Periodica Polytechnica Transportation Engineering, 49(1), 89-92. https://doi.org/10.3311/PPtr.13083.
- Borawski, A., Mieczkowski, G., & Szpica, D. (2020). Simulation tests of peripheral friction brake used in agricultural machinery shafts. Engineering for Rural Development, 19, 494-502. https://doi.org/10.22616/ERDev.2020.19.TF112.
- Borawski, A., Mieczkowski, G., & Szpica, D. (2023). Composites in Vehicles Brake Systems-Selected Issues and Areas of Development. Materials, 16(6), 2264. https://doi.org/10.3390/ma16062264.
- Caban, J., Marczuk, A., Šarkan, B., & Vrábel, J. (2015). Studies on operational wear of glycol-based brake fluid. Przemysl Chemiczny, 94(10), 1802-1806. https://doi.org/10.15199/62.2015.10.30.
- Caban, J., Turski, A., Nieoczym, A., Tarkowski, S., & Jereb, B. (2019). Impact of specific factors on the state of the tire pressure value. Archives of Automotive Engineering, 85(3), 137-148. https://doi.org/10.14669/AM.VOL85.ART10.
- Caban, J., Drozdziel, P., Stoma, M., Dudziak, A., Vrabel, J., & Stopka, O. (2020). Road Traffic Safety in Poland, Slovakia and Czech Republic-Statistic Analysis. 12th International Science-Technical Conference Automotive Safety 2020, 21-23 October 2020, Kielce, Poland, 9293507. ISBN:978-1-7281-5813-6.
- Caban, J., Vrábel, J., Šarkan, B., Kuranc, A., & Słowik, T. (2021). Operational tests of brake fluid in passenger cars. Periodica Polytechnica Transportation Engineering, 49(2), 126-131. https://doi.org/10.3311/PPtr.14583.
- Drozd, K., Tarkowski, S., Caban, J., Nieoczym, A., Vrábel, J., & Krzysiak, Z. (2022). Analysis of Truck Tractor Tire Damage in the Context of the Study of Road Accident Causes. Applied Sciences, 12(23), 12333. https://doi.org/10.3390/app122312333.
- Droździel, P., Krzywonos, L., Madlenak, R., & Rybicka, I. (2014). Selected aspects of analyses of failure rates of active safety systems in buses. Communications - Scientific Letters of the University of Žilina, 16(3), 114-119. https://doi.org/10.26552/com.C.2014.3.114-119.
- Fujiwara, T. & Takechi, K. (2021). Making the world safer: Autonomous emergency braking systems enhance safety for senior drivers. Applied Economics Letters, 29(13), 1177–1181. https://doi.org/10.1080/13504851.2021.1917760.
- Gogola, M., Ondruš, J., Kubalak, S., & Turiak, P. (2022). Comparison of braking properties of selected vehicle with different methods. Archives of Automotive Engineering, 95, 1, 5-17. https://doi.org/10.14669/AM.VOL95.ART1.
- Hu, L., Li, H., Yi, P., Huang, J., Lin, M. & Wang, H. (2023). Investigation on AEB Key Parameters for Improving Car to Two-Wheeler Collision Safety Using In-Depth Traffic Accident Data, IEEE Transactions on Vehicular Technology, 72(1), 113-124. https://doi.org/10.1109/TVT.2022.3199969.
- Hudec, J., Šarkan, B., Caban, J., & Stopka, O. (2021). The impact of driving schools’ training on fatal traffic accidents in the Slovak Republic. Scientific Journal of Silesian University of Technology. Series Transport, 110, 45-57. https://doi.org/10.20858/sjsutst.2021.110.4.
- Hudec, J., Šarkan, B., & Czodörová, R. (2021a). Examination of the results of the vehicles technical inspections in relation to the average age of vehicles in selected EU states. Transportation Research Procedia, 55, 2-9. https://doi.org/10.1016/j.trpro.2021.07.063.
- Hudec, J., & Šarkan, B. (2022). Effect of periodic technical inspections of vehicles on traffic accidents in the Slovak Republic. Communications - Scientific Letters of the University of Žilina, 24(3), A142-A159. https://doi.org/10.26552/com.C.2022.3.A142-A159.
- Idzikowski, A. (2011). Stan techniczny i wyposażenie pojazdów samochodowych a bezpieczeństwo ruchu drogowego. Polskie Stowarzyszenie Zarządzania Wiedzą: Studia i Materiały, 46, 94-106.
- Idzikowski, A. (2017). Boolean model of HSUH leakage testing for the purpose of designing a diagnosing unit of selected damages of vehicle braking mechanisms. The Archives of Automotive Engineering - Archiwum Motoryzacji, 78(4), 79-92. https://doi.org/10.14669/AM.VOL78.ART6.
- Idzikowski, A., & Salamon, S. (2011). Jakość konstrukcyjna elementów układu hamulcowego a bezpieczeństwo ruchu drogowego. Polskie Stowarzyszenie Zarządzania Wiedzą: Studia i Materiały, 47, 92-108.
- Idzikowski, A., & Salamon, S. (2013). Mathematical model for the diagnostics of vehicle hydraulic braking system leakage. The Archives of Automotive Engineering - Archiwum Motoryzacji, 61(3), 13-23.
- Jegadeeshwaran, R., & Sugumaran, V. (2013). Comparative study of decision tree classifier and best first tree classifier for fault diagnosis of automobile hydraulic brake system using statistical features. Measurement, 46, 3247–3260. https://doi.org/10.1016/j.measurement.2013.04.068.
- Jegadeeshwaran, R., & Sugumaran, V. (2015). Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines. Mechanical Systems and Signal Processing, 52-53, 436–446. https://doi.org/10.1016/j.ymssp.2014.08.007.
- Jilek, P., & Berg, J. (2021). Optimization of device allowing variation of adhesion force for road vehicle testing at safe speed. Engineering for Rural Development, 20, 373-378. https://doi.org/10.22616/ERDev.2021.20.TF078.
- Jilek, P., & Nemec, J. (2020). Changing adhesion force for testing road vehicles at safe speed. Engineering for Rural Development, 19, 1411-1417. https://doi.org/10.22616/ERDev.2020.19.TF351.
- Kopčanová, S., Sejkorová, M., Kučera, M., & Hnilicová, M. (2020). Wear of hydraulic system components assessment based on the analysis of hydraulic oil degradation degree. Przemysl Chemiczny, 99(9), 1399-1403. https://doi.org/10.15199/62.2020.9.XX.
- Kubiak, P., Krzemieniewski, A., Lisiecki, K., Senko, J., & Szosland, A. (2018). Precise method of vehicle velocity determination basing on measurements of car body deformation–non-linear method for ‘Full Size’ vehicle class. International Journal of Crashworthiness, 23(3), 302-310. https://doi.org/10.1080/13588265.2017.1331692.
- Kuboń, M. (2007). Wyposażenie i wykorzystanie środków transportowych w gospodarstwach o różnym typie produkcji rolniczej. Inżynieria Rolnicza, 8(96), 141-148.
- Kuboń, M., & Kurzawski D. (2013). Kierunek produkcji a wyposażenie i wykorzystanie środków transportowych w wybranych gospodarstwach rolnych. Inżynieria Rolnicza, 2(143), 191-200.
- Kuliś, E., & Żółtowski, B. (2011). Badania układów hamulcowych. Polskie Stowarzyszenie Zarządzania Wiedzą: Studia i Materiały, 47, 126-140. ISSN 1732-324X.
- Kuranc, A., Zając, G., Szyszlak-Bargłowicz, J., Słowik, T., Vrǎbel, J., Šarkan, B., Caban, J., & Makarski, P. (2018). Boiling point of the brake fluid based on alkyl ethers of alkylene glycols in vehicles being in use. Przemysl Chemiczny, 97(12), 2102-2105. https://doi.org/10.15199/62.2018.12.17.
- Maia, I. D. de C. D. (2019). Modeling and control of anti-lock braking systems considering different representations for tire–road interaction. In 23rd International Conference on System Theory, Control and Computing pp. 344-349. https://doi.org/10.1109/ICSTCC.2019.8885694.
- Ondruš, J., Jančár, A., Gogola, M., Varga, P., Šarić, Ž., & Caban, J. (2024). Smartphone Sensors in Motion: Advancing Traffic Safety with Mobile Technology. Applied Sciences, 14(13), 5404. https://doi.org/10.3390/app14135404.
- Pliassounov, S. (2007). Fundamentals and common problems of seal integrity robustness of standardized brake tubing threaded connectors. SAE Technical Paper, 2007-01-0557. https://doi.org/10.4271/2007-01-0557.
- Przywara, A., Kraszkiewicz, A., Koszel, M., Atanasov, A.Z., & Parafiniuk, S. (2023). The Structure of Engine Power of Agricultural Tractors Registered in Poland Between 2010 and 2020. Lecture Notes in Civil Engineering, 289, 1-14. https://doi.org/10.1007/978-3-031-13090-8_1.
- Rybicka, I., Caban, J., Vrábel, J., Šarkan, B., Stopka, O., & Misztal, W. (2018). Analysis of the safety systems damage on the example of a suburban transport enterprise. 11th International Science and Technical Conference Automotive Safety, AUTOMOTIVE SAFETY 2018, 18-20 April 2018, Casta, Papiernicka, Slovakia, pp. 1–6. https://org.doi/10.1109/AUTOSAFE.2018.8373323.
- Sejkorová, M., & Glos, J. (2017), Analysis of degradation of motor oils used in zetor tractors. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 65(1), 179-187. https://doi.org/10.11118/actaun201765010179.
- Sejkorová, M., Verner, J., Sejkora, F., Hurtová, I., & Senkýř, J. (2018). Analysis of operation wear of brake fluid used in a Volvo car. Transport Means - Proceedings of the International Conference, 2018, 3-5 October 2018, Trakai, pp. 592-596.
- Serji, A., Mermri, E. B., & Blej, M. (2023). Modeling Automatic Emergency Braking System Using Fuzzy Timed Petri Nets Based on the 3-Second Rule, 2023 International Conference on Electrical, Computer and Energy Technologies, Cape Town, South Africa, 1-6, https://doi.org/10.1109/ICECET58911.2023.10389413.
- Szpica, D., Kisiel, M., & Czaban, J. (2022). Simulation Evaluation of the Influence of Selected Geometric Parameters on the Operation of the Pneumatic Braking System of a Trailer with a Differential Valve. Acta Mechanica et Automatica, 16(3), 233-241. https://doi.org/10.2478/ama-2022-0028.
- Šarkan, B., Jaśkiewicz, M., & Kiktová, M. (2020). The impact of the truck loads on the braking efficiency assessment. Open Engineering, 10(1), 105-112. https://doi.org/10.1515/eng-2020-0014.
- Wilczarska, J., Kuliś, E., & Matuszewski, M. (2018). Characteristics of hydraulic systems used in vehicles other than machines at work. Autobusy: technika, eksploatacja, systemy transportowe, 12, 2018, 701-705. https://doi.org/10.24136/atest.2018.482.
- Wojtas, A., & Szkoda, M. (2018). Analiza wybranych czynników wpływających na bezpieczeństwo w ruchu drogowym. Autobusy: technika, eksploatacja, systemy transportowe, 19(6), 1149-1154. https://doi.org/10.24136/atest.2018.244.
- Wrzesiński, B. (2020). Badania spęczeń przewodów hamulcowych dla modelu hydraulicznej zakuwarki. Praca magisterska, Uniwersytet Przyrodniczy w Lublinie.
- BN-90/3617-09. Hydrauliczne układy hamulcowe. Przewody metalowe.
- PN-EN 12449:2023-11. Miedź i stopy miedzi -- Rury okrągłe bez szwu ogólnego przeznaczenia.
- PN-EN ISO 14253-1:2018-02. Specyfikacje geometrii wyrobów (GPS) -- Kontrola wyrobów i wyposażenia pomiarowego za pomocą pomiarów -- Część 1: Reguły orzekania zgodności lub niezgodności ze specyfikacją.
DOI: https://doi.org/10.2478/agriceng-2026-0003 | Journal eISSN: 2449-5999 | Journal ISSN: 2083-1587
Language: English
Page range: 49 - 61
Submitted on: May 1, 2025
Accepted on: Dec 1, 2025
Published on: Apr 16, 2026
Published by: Polish Society of Agricultural Engineering
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2026 Marek Boryga, Bartłomiej Wrzesiński, published by Polish Society of Agricultural Engineering
This work is licensed under the Creative Commons Attribution 4.0 License.