References
- WENDLER, M. – KOPJÁK, J. – SZÜCS, I. – BENDIÁK, I.: “Enhancing Sensorless Start-Up in PMSM: Analysis and Optimization of Open-Loop Technique for Smooth Transitions,” in 2025 IEEE 23rd World Symposium on Applied Machine Intelligence and Informatics (SAMI 2025), Stará Lesná, Slovakia: IEEE, Jan. 2025.
- “A rotor position estimation method based on fuzzy PI for SPMSM sensorless control,” presented at the IEEE International Future Energy Electronics Conference and ECCE Asia, IEEE, Jun. 2017, pp. 2148–2152. doi: 10.1109/IFEEC.2017.7992384.
- DUBOIS, D. – PRADE, H. – UGHETTO, L.: “Fuzzy Logic, Control Engineering and Artificial Intelligence,” in Fuzzy Algorithms for Control, H. B. Verbruggen, H.-J. Zimmermann, and R. Babuška, Eds., Dordrecht: Springer Netherlands, 1999, pp. 17–57. doi: 10.1007/978-94-011-4405-6_2.
- ZADEH, L. A.: “Fuzzy logic,” Computer, vol. 21, no. 4, pp. 83–93, 1988.
- KIM, H. – HARKE, M. C. – LORENZ, R. D.: “Sensorless control of interior permanent-magnet machine drives with zero-phase lag position estimation,” IEEE Trans. on Ind. Applicat., vol. 39, no. 6, pp. 1726–1733, Nov. 2003, doi: 10.1109/TIA.2003.818966
- KÓNYA, L.: “Min˝osít˝o szabályozás (Fuzzy Control),” Rádiótechnika, vol. 1998, no. 2, pp. 63–65, 1998.
- KÓNYA, L.: “Min˝osít˝o szabályozás (Fuzzy Control) 2.,” Rádiótechnika, vol. 1998, no. 3, pp. 114–117, 1998.
- CHEOK, A. D. – WANG, Z.: “Fuzzy Logic Rotor Position Estimation Based Switched Reluctance Motor DSP Drive With Accuracy Enhancement,” IEEE Trans. Power Electron., vol. 20, no. 4, pp. 908–921, Jul. 2005, doi: 10.1109/TPEL.2005. 850958.
- BESSADET, I.: “Implementation of a cascaded fuzzy sliding mode control of hybrid power filter,” ELECTROTECHNICAL REVIEW, vol. 1, no. 6, pp. 76–81, Jun. 2023, doi: 10.15199/48.2023.06.14.
- WENDLER, M. – KOPJÁK, J.: “Mechanical Brush Commutation Motor Drive Solution for Higher Education a New Electronic Motor Control Board for University Laboratories to Support Educating the Embeeded Brushed Motor Drive Solutions,” in 2024 IEEE 18th International Symposium on Applied Computational Intelligence and Informatics (SACI), Timisoara, Romania: IEEE, May 2024, pp. 000581–000586. doi: 10.1109/SACI60582.2024. 10619922.
- MENICH, P. – KOPJÁK, J.: “Optimal Fuzzy Controller, using a Genetic Algorithm for a Ball on Wheel System,” ACTA POLYTECH HUNG, vol. 20, no. 6, pp. 61–77, 2023, doi: 10.12700/APH.20.6. 2023.6.4
- ODRY, Á. – FULLÉR, R. – RUDAS, I. J. – ODRY, P.: “Fuzzy control of self-balancing robots: A control laboratory project,” Computer Applications in Engineering Education, vol. 28, no. 3, pp. 512–535, 2020, doi: 10.1002/cae.22219
- KÁDÁR, I. – FARKAS, F. – HALÁSZ, S.: “Neuro-fuzzy Speed Controller for DC Drives Using Low Precision Shaft Encoder,” in Proceedings of 4th Joint Slovakian-Hungarian Symposium on Applied Machine Intelligence SAMI 2006, Budapest, Magyarország: Budapest Tech, BMF, pp. 426–437.
- Performance Analysis of a Sensorless DC Motor Using Neuro Fuzzy Logic Control, (Jan. 27, 2023). doi: 10.1109/IITCEE57236.2023.10090872.
- “Designing of Neuro-Fuzzy Controllers for Brushless DC Motor Drives Operating with Multiswitch Three-Phase Topology,” Journal of Electrical and Computer Engineering, vol. 2022, p. 7001448:1-7001448:12, Jul. 2022, doi: 10.1155/2022/7001448.
- KHAN, H. – HUSSAIN, S. – BAZAZ, M. A.: “ANFIS Based Speed Controller for a Direct Torque Controlled Induction Motor Drive,” in Intelligent Systems Technologies and Applications 2016, J. M. Corchado Rodriguez, S. Mitra, S. M. Thampi, and E.-S. El-Alfy, Eds., Cham: Springer International Publishing, 2016, pp. 891–902. doi: 10.1007/978-3-319-47952-1_71.
- DEVI, K. S. – DHANASEKARAN, R. – MUTHULAKSHMI, S.: “Improvement of speed control performance in BLDC motor using fuzzy PID controller,” in 2016 International Conference on Advanced Communication Control and Computing Technologies (ICACCCT), Ramanathapuram, India: IEEE, May 2016, pp. 380–384. doi: 10.1109/ICACCCT.2016.7831666
- PRABU, K. J. – POONGODI, P. – PREMKUMAR, K.: “Fuzzy supervised online coactive neuro-fuzzy inference system-based rotor position control of brushless DC motor,” IET Power Electronics, vol. 9, no. 11, pp. 2229–2239, Sep. 2016, doi: 10.1049/iet-pel.2015.0919
- Permanent Magnet Synchronous Motor Rotor Position Estimation Using Fuzzy-Based Sliding Mode Observer, (May 08, 2017). doi: 10.1109/IEEEGCC.2017.8448219.
- High-Performance ANFIS-Based Controller for BLDC Motor Drive, (Jan. 01, 2022). doi: 10.1007/978-981-16-3675-2_33.
- NASCIMENTO, R. G. – FRICKE, K. – VIANA, F.: “Quadcopter Control Optimization through Machine Learning,” in AIAA Scitech 2020 Forum, Orlando, FL: American Institute of Aeronautics and Astronautics, Jan. 2020. doi: 10.2514/6. 2020-1148.
- PARASILITI, F. – PETRELLA, R. – TURSINI, M.: “Initial rotor position estimation method for PM motors,” in Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129), Rome, Italy: IEEE, 2000, pp. 1190–1197. doi: 10.1109/IAS.2000.881983.
- JIEFAN, C. – YUE, F. – HUI, W.: “Fuzzy Direct Torque Control of Permanent Magnet Synchronous Motor,” in 2009 Sixth International Conference on Fuzzy Systems and Knowledge Discovery, Aug. 2009, pp. 107–111. doi:10.1109/FSKD.2009.39.
- KUCZMANN, M. – HORVÁTH, K.: “Tensor Product Alternatives for Nonlinear Field-Oriented Control of Induction Machines,” Electronics, vol. 13, no. 7, p. 1405, Apr. 2024, doi: 10.3390/electronics13071405.
- ZHAO, K. – YANG, L. – ZHAO, S. – HU, H.: “A Hybrid Control Strategy for Sensorless PMSM with a Super-Twisting Sliding Mode Observer and a Two-stage Filter Based on Fuzzy Rules,” in IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, Oct. 2022, pp. 1–7. doi: 10. 1109/IECON49645.2022.9968394.
- Implementation and analysis of Adaptive Neural Fuzzy Inference System based Brushless DC motor, (May 18, 2023). doi: 10.1109/IRASET57153. 2023.10152892.
- KUMBLA, K. K. – JAMSHIDI, M. – BENITEZ-READ, J.: “Implementation of fuzzy logic and neural networks control algorithm using a digital signal processing chip,” in Proceedings of the 1995 ACM symposium on Applied computing - SAC ’95, Nashville, Tennessee, United States: ACM Press, 1995, pp. 524–528. doi: 10.1145/315891.316086.