References
- [1] PETRO, V. – KYSLAN, K.: “Design and Simulation of Direct and In-direct Back EMF Sliding Mode Observer for Sensorless Control of PMSM”, Power Electronics and Drives. 2020; 5(1):215-228. https://doi.org/10.2478/pead-2020-0016.
- [2] SCHROEDL, M.: “Sensorless control of ac machines at low speed and standstill based on the INFORM method”, in IAS 1996. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting, vol. 1, 1996, pp. 270-277 vol.1.
- [3] JANSEN, P. – LORENZ, R.: “Transducerless position and velocity estimation in induction and salient ac machines”, IEEE Transactions on Industry Applications, vol. 31, no. 2, pp. 240-247, 1995.10.1109/28.370269
- [4] CILIA, J. – ASHER, G. – BRADLEY, K.: “Sensorless position detection for vector controlled induction motor drives using an asymmetric outer-section cage”, in IAS 1996. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting, vol. 1, 1996, pp. 286-292 vol.1.
- [5] G. WANG, G. – VALLA, M. – SOLSONA, J.: “Position sensorless permanent magnet synchronous machine drives a review”, IEEE Transactions on Industrial Electronics, vol. 67, no. 7, pp. 5830-5842, 2020.
- [6] CORLEY, M. – LORENZ, R.: “Rotor position and velocity estimation for a permanent magnet synchronous machine at standstill and high speeds”, in IAS 1996. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting, vol. 1, 1996, pp. 36-41 vol.1.
- [7] JANG, J.-H. – SUL, S.-K. – HA, J.-I. – IDE, K. – SAWAMURA, M.: “Sensorless drive of surface-mounted permanent-magnet motor by high-frequency signal injection based on magnetic saliency”, IEEE Transactions on Industry Applications, vol. 39, no. 4, pp. 1031-1039, 2003.
- [8] BIANCHI, N. – BOLOGNANI, S. – JANG, J.-H. – SUL, S.-K.: “Advantages of inset pm machines for zero-speed sensorless position detection”, in Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, vol. 1, 2006, pp. 495-502.10.1109/IAS.2006.256565
- [9] MASAKI, R. – KANEKO, S. – HOMBU, M. – SAWADA, T. – YOSHIHARA, S.: “Development of a position sensorless control system on an electric vehicle driven by a permanent magnet synchronous motor”, in Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No.02TH8579), vol. 2, 2002, pp. 571-576 vol.2.
- [10] KIM, D. – KWON, Y.-C. – SUL, S.-K. – KIM, J.-H. – YU, R.-S.: “Suppression of injection voltage disturbance for high-frequency square-wave injection sensorless drive with regulation of induced high-frequency current ripple”, IEEE Transactions on Industry Applications, vol. 52, no. 1, pp. 302-312, 2016.10.1109/TIA.2015.2478887
- [11] NI, R. – LU, K. – BLAABJERG, F. – XU, D.: “A comparative study on pulse sinusoidal high frequency voltage injection and inform methods for pmsm position sensorless control”, in IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, 2016, pp. 2600-2605.
- [12] LIU, J. – ZHANG, Y. – YANG, H. – SHEN, W.: “Position sensorless control of pmsm drives based on hf sinusoidal pulsating voltage injection”, in 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 3849-3853.10.1109/ECCE44975.2020.9236162
- [13] WANG, G. – ZHANG, G. – XU, D.: “Position Sensorless Control Techniques for Permanent Magnet Synchronous Machine Drives”, Springer Nature Singapore Pte Ltd. 2020, 2020, ISBN 978-981-15-0049-710.1007/978-981-15-0050-3
- [14] XIE, G. – LU, K. – DWIVEDI, S.-K. – ROSHOLM, J. R. – BLAABJERG, F.: “Minimum-voltage vector injection method for sensorless control of pmsm for low-speed operations”, IEEE Transactions on Power Electronics, vol. 31, no. 2, pp. 1785-1794, 2016.
- [15] WANG, G. – LI, Z. – ZHANG, G. – YU, Y. – XU, D.: “Quadrature pll-based high-order sliding-mode observer for ipmsm sensorless control with online mtpa control strategy”, IEEE Transactions on Energy Conversion, vol. 28, no. 1, pp. 214-224, 2013.10.1109/TEC.2012.2228484