Have a personal or library account? Click to login
Characteristics of AISI 420 And AISI 301 Stainless Steels Coatings Obtained by Thermal Spraying Cover

Characteristics of AISI 420 And AISI 301 Stainless Steels Coatings Obtained by Thermal Spraying

Advances in Materials Science
Volume 25 (2025): Issue 1 (March 2025)
By: Rassim Younes,  Jacek Tomków,  Beata Skowrońska and  Mohand Amokrane Bradai  
Open Access
|Mar 2025

References

  1. Çakir, F. H., Öteyaka, M. Ö., Er, Ü., Bozkurt, F. Enhancing wear resistance of AISI 304 alloy with shot peening and investigation of corrosion behaviour in marine water. Transactions of the IMF, 99(4) (2021), 194-202.
    Search in Google ScholarBack to article
  2. Karahan, İ. H. Effect of current density on the corrosion protection performance of polyaniline coated AISI 4140 steel. Transactions of the IMF, 97(1) (2019), 48-52.
    Search in Google ScholarBack to article
  3. Younes R, Baiamonte L, Idir A, Dalibon E, Sadeddine A, Bradai M A, Investigation on the Surface Structure and Tribological Characterization of 10 wt.% ZrO2-Reinforced Alumina Prepared by Flame Spray Coating, SAE International Journal of Materials and Manufacturing, 17 (2024), 111-123.
    Search in Google ScholarBack to article
  4. Younes, R., Bradai, M.A., Sadeddine, A., Mouadji, Y. Effect of bond-layer on the wear resistance of a martensitic stainless steel coating obtained by wire arc spray. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials, 30 (2020), 29-34. https://doi.org/10.18280/rcma.300105
    Search in Google ScholarBack to article
  5. Santos, C. B., Tentardini, E., Piana, L. A., Carpenter, D., Strohaecker, T. R., Ferreira, J. Z. Corrosion resistance of PAPVD TiN coating on AISI 304 stainless steel. Transactions of the IMF, 80 (2002), 147-149.
    Search in Google ScholarBack to article
  6. James, D. H. The properties and applications of arc sprayed coatings. Transactions of the IMF, 60 (1982), 49-53.
    Search in Google ScholarBack to article
  7. Pawłowski, L. Application of solution precursor spray techniques to obtain ceramic films and coatings. Future Development of Thermal Spray Coatings (2015), 123-141.
    Search in Google ScholarBack to article
  8. Younes, R., Bradai, M. A., Sadeddine, A., Mouadji, Y., Bilek, A., Benabbas, A. Microstructural and Tribological Properties of Al2O3-13pctTiO2 Thermal Spray Coatings Deposited by Flame Spraying. Metallurgical and Materials Transactions B, 46 (2015), 2394-2403.
    Search in Google ScholarBack to article
  9. He, X. K., Chen, B. Z., Li, X. D., Hu, G. S., Wu, L. Y., Tian, W. Z. Technology of black coloring for stainless steel by electrochemical method. Journal of Central South University of Technology, 13 (2006), 135-140.
    Search in Google ScholarBack to article
  10. Bouklouche, I., Younes, R., Boudjit, S., Bradai, M.A., Rezzoug, A., Gehlen, L.R., Pintaude, G. Effects of isothermal heat treatment on tribological and electrochemical performances of alumina-based coatings with monoclinic zirconia, Industrial Lubrication and Tribology, 77 (2025), 250-259. https://doi.org/10.1108/ILT-05-2024-0190
    Search in Google ScholarBack to article
  11. Sirohi, S., Pandey, S. M., Świerczyńska, A., Rogalski, G., Kumar, N., Landowski, M., Fydrych, D. Pandey, C. Microstructure and mechanical properties of combined GTAW and SMAW dissimilar welded joints between Inconel 718 and 304L austenitic stainless steel. Metals, 13(14) (2022).
    Search in Google ScholarBack to article
  12. Lisiecki, A., Kurc-Lisiecka, A., Pakieła, W., Topolska, S. Microstructure and properties of laser-welded butt joints of x2crtinb18 steel. International Journal of Modern Manufacturing Technologies (IJMMT), 15(1) (2023), 125-131
    Search in Google ScholarBack to article
  13. Skowrońska, B., Chmielewski, T., Kulczyk, M., Skiba, J., Przybysz, S. Microstructural investigation of a friction-welded 316l stainless steel with ultrafine-grained structure obtained by hydrostatic extrusion. Materials, 14(6) (2021), 1537.
    Search in Google ScholarBack to article
  14. Mohan, D. G., Gopi, S., Tomków, J., Memon, S. Assessment of corrosive behaviour and microstructure characterization of hybrid friction stir welded martensitic stainless steel. Advances in Materials Science, 21(4) (2021), 67-78.
    Search in Google ScholarBack to article
  15. Szala, M., Łatka, L., Awtoniuk, M., Winnicki, M., Michalak, M. Neural modelling of APS thermal spray process parameters for optimizing the hardness, porosity and cavitation erosion resistance of Al2O3-13 wt% TiO2 coatings. Processes, 8(12) (2020), 1544.
    Search in Google ScholarBack to article
  16. Grimm, M., Kutschmann, P., Pluta, C., Schwabe, O., Lindner, T., Lampke, T. Quasi Non-Destructive Quality Assessment of Thermally Sprayed AISI 316L Coatings Using Polarization Measurements in 3.5% NaCl Gel Electrolyte. Coatings, 13(7) (2023), 1256.
    Search in Google ScholarBack to article
  17. Hua, M., Xicheng, W., Jian, L. Friction and wear behavior of SUS 304 austenitic stainless steel against Al2O3 ceramic ball under relative high load. Wear, 265(5-6) (2008), 799-810.
    Search in Google ScholarBack to article
  18. Xia, Y., Hu, J., Zhou, F., Lin, Y., Qiao, Y., Xu, T. Friction and wear behavior of plasma nitrided 1Cr18Ni9Ti austenitic stainless steel under lubrication condition. Materials Science and Engineering: A, 402(1-2) (2005), 135-141.
    Search in Google ScholarBack to article
  19. Yang, J. F., Jiang, Y., Hardell, J., Prakash, B., Fang, Q. F. Influence of service temperature on tribological characteristics of self-lubricant coatings: A review. Frontiers of Materials Science, 7 (2013) 28-39.
    Search in Google ScholarBack to article
  20. Sabooni, S., Karimzadeh, F., Enayati, M. H., Ngan, A. H. W. Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing. Materials & Design, 76 (2015), 130-140.
    Search in Google ScholarBack to article
  21. Balla, V. K., Bose, S., Bandyopadhyay, A. Processing of bulk alumina ceramics using laser engineered net shaping. International Journal of Applied Ceramic Technology, 5(3) (2008), 234-242.
    Search in Google ScholarBack to article
  22. El Radaf, I. M., Nasr, M., Mansour, A. M. Structural, electrical and photovoltaic properties of CoS/Si heterojunction prepared by spray pyrolysis. Materials Research Express, 5(1) (2018), 015904.
    Search in Google ScholarBack to article
  23. Yan, J., Yang, Z., Zhang, L., Wang, J., Research on the microstructure and properties of arc-sprayed austenitic stainless steel and nickel-based alloy composite coatings with different spraying distances. Crystals, 15 (2025), 142. 10.3390/cryst15020142
    Search in Google ScholarBack to article
  24. Ziewiec, A., Zielińska-Lipiec, A., Kowalska, J., Ziewiec, K. Microstructure Characterization of Welds in X5CrNiCuNb16-4 Steel in Overaged Condition. Advances in Materials Science, 19 (2019), 57-69. https://doi.org/10.2478/adms-2019-0005
    Search in Google ScholarBack to article
  25. Vargas-Gonzalez, L., Speyer, R. F., Campbell, J. Flexural strength, fracture toughness, and hardness of silicon carbide and boron carbide armor ceramics. International Journal of Applied Ceramic Technology, 7(5) (2010) 643-651.
    Search in Google ScholarBack to article
  26. Ansar Syed, A. Co-projection d’alumine et d’acier inoxydable par plasma d’arc. (Doctoral dissertation) Limoges, 2004,
    Search in Google ScholarBack to article
  27. Newbery, A. P., Grant, P. S. Droplet splashing during arc spraying of steel and the effect on deposit microstructure. Journal of Thermal Spray Technology, 9 (2000), 250-258.
    Search in Google ScholarBack to article
  28. Schmuecker S M, Clouser D, Kraus T J, Leonard B M. Synthesis of metastable chromium carbide nanomaterials and their electrocatalytic activity for the hydrogen evolution reaction. The Royal Society of Chemistry, Dalton Trans., 46 (2017), 13524-13530, https://doi.org/10.1039/C7DT01404J
    Search in Google ScholarBack to article
  29. Scherrer, P. Bestimmung der Größen und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen. Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse, (1918), 98-100.
    Search in Google ScholarBack to article
  30. Iankov, R., Cherneva, S., Stoychev, D. Investigation of material properties of thin copper films through finite element modelling of microindentation test. Applied Surface Science, 254(17) (2008), 5460-5469.
    Search in Google ScholarBack to article
  31. Younes, R., Bradai, M. A., Sadeddine, A., Mouadji, Y., Bilek, A., Benabbas, A. Effect of TiO2 and ZrO2 reinforcements on properties of Al2O3 coatings fabricated by thermal flame spraying. Transactions of Nonferrous Metals Society of China, 26(5) (2016), 1345-1352.
    Search in Google ScholarBack to article
  32. Gehlen, L. R., Bolelli, G., Puddu, P., Forlin, E., Colella, A., Pintaude, G., Lusvarghi, L. Tribological and electrochemical performances of HVOF sprayed NbC-NiCr coatings. Surface and Coatings Technology, 474 (2023), 130098.
    Search in Google ScholarBack to article
  33. Kołodziejczak, P., Bober, M., Chmielewski, T. Wear resistance comparison research of high-alloy protective coatings for power industry prepared by means of CMT cladding. Applied Sciences, 12(9) (2022), 4568.
    Search in Google ScholarBack to article
  34. Bochenek, K., Węglewski, W., Strojny-Nędza, A., Pietrzak, K., Chmielewski, T., Chmielewski, M., Basista, M. Microstructure, mechanical, and wear properties of NiCr-Re-Al2O3 coatings deposited by HVOF, atmospheric plasma spraying, and laser cladding. Journal of Thermal Spray Technology, 31(5) (2022), 1609-1633.
    Search in Google ScholarBack to article
  35. Chidambaram, D., Clayton, C. R., Dorfman, M. R. Evaluation of the electrochemical behavior of HVOF-sprayed alloy coatings. Surface and Coatings Technology, 176(3) (2004), 307-317.
    Search in Google ScholarBack to article
  36. Sharma, A., Singh, A. K. Electroless Ni-P-PTFE-Al2O3 dispersion nanocomposite coating for corrosion and wear resistance. Journal of Materials Engineering and Performance, 23(1) (2014), 142-151.
    Search in Google ScholarBack to article
  37. Bakare, M. S., Voisey, K. T., Chokethawai, K., McCartney, D. G. Corrosion behaviour of crystalline and amorphous forms of the glass forming alloy Fe43Cr16Mo16C15B10. Journal of Alloys and Compounds, 527 (2012), 210-218.
    Search in Google ScholarBack to article
  38. Zhang, C., Guo, R. Q., Yang, Y., Wu, Y., Liu, L. Influence of the size of spraying powders on the microstructure and corrosion resistance of Fe-based amorphous coating. Electrochimica Acta, 56(18) (2011), 6380-6388.
    Search in Google ScholarBack to article
  39. Khameneh Asl, S., Saghi Beyragh, M. R., Noori, N. F. Study of Corrosion Behavior of Conventional and Nanostructured WC-Ni High Velocity Oxy Fuel (HVOF) Sprayed Coatings. Materials Science Forum, 673 (2011), 167-172.
    Search in Google ScholarBack to article
  40. Sharma, L., Dhiman, A., Jakhar, A., Sharma, K. Experimental investigation on corrosion behaviour of heat-treated API X70 pipeline steel. 24 (2024), 70-91. https://doi.org/10.2478/adms-2024-0013
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/adms-2025-0006 | Journal eISSN: 2083-4799 | Journal ISSN: 1730-2439
Journal RSS Feed
Language: English
Page range: 95 - 111
Submitted on: Jan 21, 2025
|
Accepted on: Mar 19, 2025
|
Published on: Mar 26, 2025
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
microstructure,
hardness measurements,
tribology,
corrosion resistance
Related subjects:
Materials sciences,
Functional and smart materials

© 2025 Rassim Younes, Jacek Tomków, Beata Skowrońska, Mohand Amokrane Bradai, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Previous articleVolume 25 (2025): Issue 1 (March 2025)