References
- Semiatin S.L., ASM Handbook, Metalworking: Bulk Forming. vol. 14A. ASM International; 2005.
- Altan T., Ngaile G., Shen G., Cold and Hot Forging: Fundamentals and Applications. ASM International, 2005.
- Prasad Y., Rao K.P., Sasidhara S., Hot Working Guide-A Compendium of Processing Maps. 2ª ed. ASM International; 2015.
- Kim H., Gu J.C., Zoller L., Control of the servo-press in stamping considering the variation of the incoming material properties. International Deep Drawing Research Group, IOP Conf. Ser. Mater. Sci. Eng., 651, 2019.
- Lins G.M., Mechatronic system for measuring hot-forged automotive parts based on image analysis. Trans. Inst. Meas. Control., 2018, Vol. 40(13) 3774–3787.
- Saberi S., Fischer J., Stockinger M., Tikal R., Afsharmia R., Theoretical and experimental investigations of mechanical vibrations of hot hammer forging. Int. J. Adv. Manuf. Technol., 114, 3037–3045 2021.
- Durand C., Freund L., Baudouin C., Bigot R., Guérin J., Comparison of different sensor technologies to monitor a forging process. 24th International Conference on Material Forming, 2021.
- Hensel, A., Spittel, T., Kraft – und Arbeitsbedarf bildsamer Formgbungverfahren, Leipzig: VEB Deutscher Verlag für Grundstffindustrie, 1978.
- Marques A.S., Costa L.L, Dalcin R.L, Brito A.M.G, Schaeffer L., Rocha A.S., Optimizing hot forging process parameters of hollow parts using tubular and cylindrical workpiece: numerical analysis and experimental validation. J. Mech. Eng. Autom., 2018.
- Yoneyama T., Miyoshi K., Tate T., Contact stress and temperature during air-stamp hammer upsetting of a circular cylinder. J. Manuf. Proc., 32, 2018.
- Hawryluk M., Ziemba J., Possibilities of application measurement techniques in hot die forging Processes. Measurement, 2017.
- Rasmussen, S.F., Tonnage Monitoring for Mechanical Forging Presses, FORGE Magazine, 2010.
- Grogan, R., High Speed Stamping Process Improvement Through Force and Displacement Monitoring. Helm Instrument Company Technical Report, 2002.
- Knussmann, K. D., And Rose, C., Signature-Based Process Control (SbPC™), Signature Technologies Technical Report, pp. 311–325, 1993.
- Auto Body Consortium, Total Tonnage Signature Decomposition for a Transfer/Progressive Die Process Analysis of Station-by-Station Test at A. J. Rose 250 Ton Press, NIST Advanced Manufacturing Program: NZS Technical Report No. NZS-204, 1997.
- Zhang, Y.; Liu, F. The research of hydraulic control system for die forging hammer. China Met. Form. Equip. Manuf. Technol. 2010, 1, 68–71.
- Jin, W.; Ma, W.; Yang, S. Simulation Research on Impact Energy of 50kJ Hydraulic Die Forging Hammer. Met. Equip. Manuf. Technol. 2008, 5, 90–92.
- Zhang, X.; Li, W.; Li, S. Forging process optimization of precision closed die forging hammer. MW Met. Form. 2018, 11, 76–77.
- Yan, X.; Chen, B. Analysis of a Novel Automatic Control Approach for the Free Forging Hammer. Appl. Sci. 2020, 10, 9127.
- Popovoc M., Mandic V., Delic M., Pavicevic V., Experimental-Numerical Analysis of Hot Forging Process with Monitoring of Heat Effects, New Technologies, Development and Application IV, Springer, 2021.
- Jones D., Snider C., Nassehi A., Yon J., Hicks B., Characterising the digital twin: A systematic literature review. CIRP J. Manuf. Sci. Technol., vol. 29, pp. 36–52, 2020.