References
- Ciecieląg, K., K. Kęcik, and K. Zaleski, Effect of depth surface defects in carbon fibre reinforced composite material on the selected recurrence quantifications. Advances in Materials Science, 2020. 20(2): p. 71-80.
- Soni, D.L. and Jagadish, Current Aspects of Additive Manufacturing in the Aerospace Industry. Additive Manufacturing with Novel Materials: Processes, Properties and Applications, 2024: p. 409-427.
- Kausar, A., Advances in carbon fiber reinforced polyamide-based composite materials. Advances in materials science, 2019. 19(4): p. 67-82.
- Tamadon, A., et al., 3D-printed tool shoulder design for the analogue modelling of bobbin friction stir weld joint quality. Advances in Materials Science, 2021. 21(1): p. 27-42.
- Chouhan, G. and G. Bala Murali, Designs, advancements, and applications of three-dimensional printed gyroid structures: A review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024. 238(2): p. 965-987.
- Ding, Y., et al., Embedded 3D printing of UV-curable thermosetting composites with continuous fiber. Materials Horizons, 2024.
- Rahman, M., et al., A review on nanomaterial-based additive manufacturing: Dynamics in properties, prospects, and challenges. Progress in Additive Manufacturing, 2024. 9(4): p. 1197-1224.
- Cheng, P., et al., 3D printing continuous natural fiber reinforced polymer composites: A review. Polymers for Advanced Technologies, 2024. 35(1): p. e6242.
- Khan, N. and A. Riccio, A systematic review of design for additive manufacturing of aerospace lattice structures: Current trends and future directions. Progress in Aerospace Sciences, 2024. 149: p. 101021.
- Szafran, K.S. and Ł.A. Jeziorek, Using Own Algorithms to Increase the Quality and Fatigue Resistance of FDM Printing for Use in Drones and Small Aircraft. Fatigue of Aircraft Structures.
- Huang, J., et al., Structural Analysis and Testing of a Flexible Rudder Using a Cosine Honeycomb Structure. Aerospace, 2024. 11(6): p. 462.
- Mahshid, R. and M. Heidari-Rarani, 3D printing of thermosets and their corresponding composites, in Additive Manufacturing Materials and Technology. 2024, Elsevier. p. 213-233.
- Alakas, H.M., et al., Selection of 3D printing technologies for prosthesis production with multi-criteria decision making methods. International Journal on Interactive Design and Manufacturing (IJIDeM), 2024. 18(2): p. 911-927.
- Elahee, G.F., et al., On the cogent formulation of an elastomeric silicone ink material for direct ink write (DIW) 3D printing. Polymer Engineering & Science, 2024. 64(6): p. 2476-2490.
- Milutinović, B., et al., Comparative analysis of 3D printing technologies (FDM and SLA) for the production of complex geometry parts.
- BADEA, R., et al., Comparing 3D printing techniques (SLA vs. FDM) for their use in radionuclide metrology. Romanian Reports in Physics, 2024. 76: p. 802.
- Pandav, G., T. Karanwad, and S. Banerjee, Sketching feasibility of additively manufactured different size gradient conventional hollow capsular shells (HCSs) by selective laser sintering (SLS): From design to applications. Journal of the Mechanical Behavior of Biomedical Materials, 2024. 151: p. 106393.
- Melenka, G., et al., Advances in 2D and 3D braided composite materials modeling, in Handbook of Advances in Braided Composite Materials. 2024, Elsevier. p. 359-406.
- Wang, X., et al., 3D printing of polymer matrix composites: A review and prospective. Composites Part B: Engineering, 2017. 110: p. 442-458.
- Subramani, R., et al., Advancements in 3D printing materials: A comparative analysis of performance and applications. Applied Chemical Engineering, 2024: p. 3867-3867.
- No-Cortes, J., et al., Comparison of 3D-printed single crown outcomes among different computer-aided design software programs. 2024.
- Fu, W., et al., 3D-printed multi-material pyramids for broadband electromagnetic wave absorption. Materials Science and Engineering: B, 2024. 307: p. 117525.
- Sans, F.A., et al., Computer‐aided design and computer‐aided manufacturing poly (methyl methacrylate) interim veneers for immediate esthetic restoration of autotransplanted teeth. Dental Traumatology, 2024. 40(3): p. 325-332.
- Boopathi, S. and P. Kumar, Advanced bioprinting processes using additive manufacturing technologies: Revolutionizing tissue engineering. 3D Printing Technologies: Digital Manufacturing. Artificial Intelligence, Industry, 2024. 4: p. 95.
- Ford, S. and T. Minshall, Invited review article: Where and how 3D printing is used in teaching and education. Additive Manufacturing, 2019. 25: p. 131-150.
- Zotti, A., et al., Hierarchical aerospace epoxy composites of carbon fiber and hyperbranched filler: Toughening behavior from nanocomposites to composites. Composite Structures, 2024. 327: p. 117719.
- Rahmatabadi, D., et al., 4D printing and annealing of PETG composites reinforced with short carbon fibers. Physica Scripta, 2024. 99(5): p. 055957.
- Wang, W., et al., Fiber-laying-assisted material extrusion additive manufacturing of continuous carbon fiber reinforced SiC ceramic matrix composites. Materials Science and Engineering: A, 2024. 890: p. 145944.
- Sahu, R., et al., Interface engineering of carbon fiber composites using CNT: A review. Polymer Composites, 2024. 45(1): p. 9-42.
- Asyraf, M., et al., Advanced composite in aerospace applications: opportunities, challenges, and future perspective. Advanced Composites in Aerospace Engineering Applications, 2022: p. 471-498.
- Liu, X., et al. Enhancing Carbon Fiber Reinforced Polymer Composites by 3D Printing Optimization. in ASME Aerospace Structures, Structural Dynamics, and Materials Conference. 2024. American Society of Mechanical Engineers.
- Zhang, C. and K. Fu, Additively manufactured 3D short carbon fiber scaffold for thermoset composites. MRS Communications, 2024: p. 1-7.
- Heitkamp, T., et al., Design Principles and Restrictions for Continuous Fiber-Reinforced Additive Manufacturing. ASME Journal of Mechanical Design, 2024. 146.
- Varma, M.M.M., P.K. Baghel, and R. Raju, Additive manufacturing of thermosetting resins in-situ carbon fibers: a review. Recent Advances in Materials and Modern Manufacturing: Select Proceedings of ICAMMM 2021, 2022: p. 97-105.
- Stieven Montagna, L., et al., Recycling of carbon fiber-reinforced thermoplastic and thermoset composites: A review. Journal of Thermoplastic Composite Materials, 2023. 36(8): p. 3455-3480.
- Tekinalp, H.L., et al., Highly oriented carbon fiber–polymer composites via additive manufacturing. Composites Science and Technology, 2014. 105: p. 144-150.
- Ning, F., et al., Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Composites Part B: Engineering, 2015. 80: p. 369-378.
- Tamez, M.B.A. and I. Taha, A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration. Additive Manufacturing, 2021. 37: p. 101748.
- Karimi, A., D. Rahmatabadi, and M. Baghani, Various FDM mechanisms used in the fabrication of continuous-fiber reinforced composites: a review. Polymers, 2024. 16(6): p. 831.
- Kaybal, H.B. and H. Ulus, Comparative analysis of thermoplastic and thermoset adhesives performance and the influence on failure analysis in jointed elium‐based composite structures. Polymer Composites, 2024. 45(4): p. 3474-3492.
- Wang, F., et al., Fabrication of a novel continuous fiber 3D printed thermoset all-composite honeycomb sandwich structure with polymethacrylimide foam reinforcement. Composites Communications, 2024. 45: p. 101794.
- Lu, S., et al., High-strength carbon fiber-reinforced polyether-ether-ketone composites with longer fiber retention length manufactured via screw extrusion-based 3D printing. Additive Manufacturing, 2024. 86: p. 104200.
- Yang, D., et al., Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites. Polymer Testing, 2021. 97: p. 107149.
- Islam, M.Z., et al., Mechanical Characterization and Production of Various Shapes Using Continuous Carbon Fiber-Reinforced Thermoset Resin-Based 3D Printing. Polymers, 2024. 16(13): p. 1828.
- Patadia, M. and R. Sweat, Modelling and analysis of multiscale hybrid composite structures for virtual design and performance-driven manufacturing: a review. Advances in Materials and Processing Technologies, 2024: p. 1-36.
- Dev, B., C.R. Gujjala, and T. Maly, Thermo-mechanical analysis of a probe for electron paramagnetic resonance spectroscopy operating at cryogenic temperatures. Review of Scientific Instruments, 2019. 90(4).
- Zach, T.F. and M.C. Dudescu, The Three-Dimensional Printing of Composites: A Review of the Finite Element/Finite Volume Modelling of the Process. Journal of Composites Science, 2024. 8(4): p. 146.
- Gómez-Fernández, H., et al., Comprehensive review of the state-of-the-art in corneal 3D bioprinting, including regulatory aspects. International Journal of Pharmaceutics, 2024: p. 124510.
- Chen, X., et al., Field-based toolpath generation for 3D printing continuous fibre reinforced thermoplastic composites. Additive Manufacturing, 2022. 49: p. 102470.
- Al Rashid, A., H. Ikram, and M. Koç, Additive manufacturing and mechanical performance of carbon fiber reinforced Polyamide-6 composites. Materials Today: Proceedings, 2022. 62: p. 6359-6363.
- Chen, S., et al., Performance enhancement of 3D‐printed carbon fiber‐reinforced nylon 6 composites. Polymer Composites, 2024. 45(6): p. 5754-5772.
- Mohammadizadeh, M. and I. Fidan, Tensile performance of 3D-printed continuous fiber-reinforced nylon composites. Journal of Manufacturing and Materials Processing, 2021. 5(3): p. 68.
- Kim, H.C., R. Tu, and H.A. Sodano, Room temperature 3D printing of high-temperature engineering polymer and its nanocomposites with porosity control for multifunctional structures. Composites Part B: Engineering, 2024. 279: p. 111444.
- Tian, X., et al., Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites. Composites Part A: Applied Science and Manufacturing, 2016. 88: p. 198-205.
- Ferreira, R.T.L., et al., Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers. Composites Part B: Engineering, 2017. 124: p. 88-100.
- Acanfora, V., et al., On the effect of printing orientation on the surface roughness of an additive manufactured composite vertical tail. The International Journal of Advanced Manufacturing Technology, 2024. 130(9): p. 4543-4564.
- Kumari, S., et al. Advanced Welding of Dissimilar Materials for Aerospace and Automotive Applications. in E3S Web of Conferences. 2023. EDP Sciences.
- Zaghloul, M.M.Y., M.M.Y. Zaghloul, and M. Fuseini, Recent progress in Epoxy Nanocomposites: Corrosion, structural, flame retardancy and applications—A comprehensive review. Polymers for Advanced Technologies, 2023.
- Saxena, A., et al., A short review on machine learning for the purpose of optimizing and predicting the properties of polymeric nanocomposites. Materials Today: Proceedings, 2023.
- Cuellar, C., K. Watson, and E. Smela, Fabrication, characterization, and repair of nanocarbon-loaded aircraft paint-based sensors for real-world SHM: studies at the laboratory scale. Structural Health Monitoring, 2023: p. 14759217231198015.
- Ogunsola, S.S., et al., Carbon nanotubes for sustainable environmental remediation: A critical and comprehensive review. Nano-Structures & Nano-Objects, 2024. 37: p. 101099.
- K. C, N., et al., Carbon nanotube filled rubber nanocomposites. Frontiers in Carbon, 2024. 3: p. 1339418.
- Liu, D., et al., Functionalization of carbon nanotubes for multifunctional applications. Trends in Chemistry, 2024.
- Sui, G., et al., The dispersion of CNT in TPU matrix with different preparation methods: solution mixing vs melt mixing. Polymer, 2019. 182: p. 121838.
- Belkheir, M., et al., Effect of carbon nanotube (CNT)-reinforced polymers and biopolymer matrix on interface damage of nanocomposite materials. Emergent Materials, 2023: p. 1-14.
- Patadia, M., et al., Enhanced Multifunctionality in Carbon Fiber/Carbon Nanotube Reinforced PEEK Hybrid Composites: Superior Combination of Mechanical Properties, Electrical Conductivity, and EMI Shielding. Composites Part B: Engineering, 2024: p. 111674.
- Wang, D. and S. Li, Collaborative optimization design of lightweight and crashworthiness of the front-end structures of automobile body using HW–GRA for Pareto mining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021: p. 0954406221992802.
- Özçakır, G., Carbon Fiber and Its Composites: Synthesis, Properties, Applications. Sinop Üniversitesi Fen Bilimleri Dergisi, 2024. 9(1): p. 240-265.
- Wang, Y., et al., Sustainable self-healing at ultra-low temperatures in structural composites incorporating hollow vessels and heating elements. Royal Society Open Science, 2016. 3(9): p. 160488.
- Guadagno, L., et al., Functional structural nanocomposites with integrated self-healing ability. Materials Today: Proceedings, 2021. 34: p. 243-249.
- Ikumapayi, O.M. and E.T. Akinlabi, Efficacy of α-β grade titanium alloy powder (Ti–6Al–2Sn– 2Zr–2Mo–2Cr–0.25 Si) in surface modification and corrosion mitigation in 3.5% NaCl on friction stir processed armour grade 7075-T651 aluminum alloys—insight in defence applications. Materials Research Express, 2019. 6(7): p. 076546.
- Pappas, J.M. and X. Dong. Nanoporous Carbon Nanotube Coating for 3D Printing of High-Performance Continuous Fiber Reinforced Polymer Composites. in International Manufacturing Science and Engineering Conference. 2022. American Society of Mechanical Engineers.
- Mansour, M.T., K. Tsongas, and D. Tzetzis, 3D printed hierarchical honeycombs with carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styrene. Journal of Composites Science, 2021. 5(2): p. 62.
- Kasraie, M., et al., Carbon nanotube as a conductive rheological modifier for carbon fiber-reinforced epoxy 3D printing inks. Composites Part B: Engineering, 2024. 282: p. 111583.
- Yu, A., et al., Molten Salt Electrolytic CO2-Derived Carbon-Based Nanomaterials for Energy Storage and Electrocatalysis: A Review. ACS Applied Nano Materials, 2024.
- Yuchang, Q., et al., Temperature dependence of the electromagnetic properties of graphene nanosheet reinforced alumina ceramics in the X-band. Journal of Materials Chemistry C, 2016. 4(22): p. 4853-4862.
- Obaid, A.N. and E. Al-Bermany, Impact of graphene nanosheets on adhesion and corrosion performance of reinforced polyurethane coating for aerospace aluminium alloy 2024-T3. International Journal of Adhesion and Adhesives, 2024. 132: p. 103695.
- Anu, K., et al., Carbon fiber-reinforced, activated carbon-embedded copper oxide nanoparticles/epoxy hybrid composites for EMI shielding in aircraft applications. Polymer Bulletin, 2024: p. 1-28.
- Tambe, P., M. Tanniru, and B.K. Sai, Structural/load bearing characteristics of polymer-graphene composites, in Polymer Nanocomposites Containing Graphene. 2022, Elsevier. p. 379-400.
- Ghimire, R. and F. Liou, Quasi-static multifunctional characterization of 3d-printed carbon fiber composites for compressive-electrical properties. Polymers, 2022. 14(2): p. 328.
- Xiao, R., et al., Stereolithography (SLA) 3D printing of carbon fiber-graphene oxide (CF-GO) reinforced polymer lattices. Nanotechnology, 2021. 32(23): p. 235702.
- Thomas, D., Enhancing the electrical and mechanical properties of graphene nanoplatelet composites for 3D printed microsatellite structures. Additive Manufacturing, 2021. 47: p. 102215.
- Chinmay, M., et al., Microstructural Modification, Mechanical Properties, and Wear Behaviour of Aged Al-Si-Mg/Si3N4 Composites for Aerospace Applications. International Journal of Lightweight Materials and Manufacture, 2024.
- Ismail, S.O., et al., Comprehensive study on tool wear during machining of fiber-reinforced polymeric composites. Machining and Machinability of Fiber Reinforced Polymer Composites, 2021: p. 129-147.
- Aslantas, K., et al., Effect of cutting conditions on tool wear and wear mechanism in micro-milling of additively manufactured titanium alloy. Tribology International, 2024. 193: p. 109340.
- Cococcetta, N.M., et al., Investigating surface finish, burr formation, and tool wear during machining of 3D printed carbon fiber reinforced polymer composite. Journal of manufacturing processes, 2020. 56: p. 1304-1316.
- Bianchi, I., et al., Effect of nozzle wear on mechanical properties of 3D printed carbon fiber-reinforced polymer parts by material extrusion. The International Journal of Advanced Manufacturing Technology, 2024. 130(9): p. 4699-4712.
- Lin, S., et al., Influence of structural geometry on tensile properties and fracture toughness in 3D printed novel structures. Engineering Failure Analysis, 2024. 161: p. 108277.
- Tiwary, V.K., A. Padmakumar, and V.R. Malik, Investigations on friction stir spot welding to overcome bed size limits of material extrusion (MEX) 3D printers. Rapid Prototyping Journal, 2024. 30(1): p. 106-123.
- Asmatulu, E., J. Twomey, and M. Overcash, Recycling of fiber-reinforced composites and direct structural composite recycling concept. Journal of Composite Materials, 2014. 48(5): p. 593-608.
- Huang, Y., et al., 3D printing of topologically optimized wing spar with continuous carbon fiber reinforced composites. Composites Part B: Engineering, 2024. 272: p. 111166.
- Skomorokhova, A.I., A.O. Glebov, and S.V. Karpov. Numerical modeling of strain-stress state of structures from porous materials. in AIP Conference Proceedings. 2024. AIP Publishing.
- Pappas, J.M., et al., A parametric study and characterization of additively manufactured continuous carbon fiber reinforced composites for high-speed 3D printing. The International Journal of Advanced Manufacturing Technology, 2021. 113: p. 2137-2151.
- Subhedar, K.M., et al., Effect of fibre orientation on mechanical properties of carbon fibre composites. Indian Journal of Engineering and Materials Sciences (IJEMS), 2021. 27(6): p. 1100-1103.
- Xiang, J., et al., Interlaminar and translaminar fracture toughness of 3D‐printed continuous fiber reinforced composites: A review and prospect. Polymer Composites, 2024. 45(5): p. 3883-3900.
- Kirmse, S., B. Ranabhat, and K.-T. Hsiao, Experimental and analytical investigation on the interlaminar shear strength of carbon fiber composites reinforced with carbon nanofiber z-threads. Materials Today Communications, 2020. 25: p. 101512.
- Somireddy, M., C. Singh, and A. Czekanski, Mechanical behaviour of 3D printed composite parts with short carbon fiber reinforcements. Engineering Failure Analysis, 2020. 107: p. 104232.
- Iragi, M., et al., Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure. Additive Manufacturing, 2019. 30: p. 100884.
- Caminero, M., et al., Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling. Polymer Testing, 2018. 68: p. 415-423.
- Uşun, A., B.B. Vatandaş, and R. Gümrük, Enhanced Mechanical Properties of Continuous Carbon Fiber Reinforced Polyether-Ether-Ketone Composites via Infrared Preheating and High Fiber Volume Fraction. Additive Manufacturing, 2024: p. 104289.
- Hou, Z., et al., Design and 3D printing of continuous fiber reinforced heterogeneous composites. Composite Structures, 2020. 237: p. 111945.
- Billerbeck, K., C. Hägele, and J. Träger, Relation of the working curve and exposure intensity in VPP 3D-printing. Progress in Additive Manufacturing, 2024. 9(4): p. 1015-1023.
- Niu, S., et al., Enhanced high-temperature dimensional accuracy by fibers in silica ceramic cores prepared through vat photopolymerization 3D printing. Ceramics International, 2024.
- Subramani, R., et al., Selection and Optimization of Carbon-Reinforced Polyether Ether Ketone Process Parameters in 3D Printing—A Rotating Component Application. Polymers, 2024. 16(10): p. 1443.
- Whitmore, S.A., Three-dimensional printing of “Green” fuels for low-cost small spacecraft propulsion systems. Journal of Spacecraft and Rockets, 2018. 55(1): p. 13-26.
- Rahman, M.A., et al., 3D printing of continuous carbon fiber reinforced thermoset composites using UV curable resin. Polymer Composites, 2021. 42(11): p. 5859-5868.
- Wu, H., et al., Evolution of Manufacturing Defects of 3D-Printed Thermoplastic Composites with Processing Parameters: A Micro-CT Analysis. Materials, 2023. 16(19): p. 6521.
- Huang, F., et al., Microcracking Resistance of 3D Printed Fibre Composites at Cryogenic Temperatures. Additive Manufacturing, 2024: p. 104307.
- Nishihara, K., et al., The Thermo-Mechanical Properties of Carbon-Fiber-Reinforced Polymer Composites Exposed to a Low Earth Orbit Environment. Aerospace, 2024. 11(3): p. 201.
- Di Trani, N., et al., Probing Physicochemical Performances of 3D Printed Carbon Fiber Composites During 8‐Month Exposure to Space Environment. Advanced Functional Materials, 2024. 34(13): p. 2310243.
- Barrios, M. and S. Van Sciver, Thermal conductivity of rigid foam insulations for aerospace vehicles. Cryogenics, 2013. 55: p. 12-19.
- Shemelya, C., et al., Anisotropy of thermal conductivity in 3D printed polymer matrix composites for space based cube satellites. Additive Manufacturing, 2017. 16: p. 186-196.
- Zhan, X., et al., Mechanical, Thermal, and Electrical Properties on 3D Printed Short Carbon Fiber Reinforced Polypropylene Composites. ACS Applied Polymer Materials, 2024. 6(7): p. 3787-3795.
- Stepashkin, А., et al., 3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties. Composites Science and Technology, 2018. 164: p. 319-326.
- Samal, S.K., et al., 3D-printed satellite brackets: materials, manufacturing and applications. Crystals, 2022. 12(8): p. 1148.
- Chen, Y., et al., 3D printed carbon-fibre reinforced composite lattice structures with good thermal-dimensional stability. Composites Science and Technology, 2022. 227: p. 109599.
- Maier, R., et al., Investigation into thermomechanical response of polymer composite materials produced through additive manufacturing technologies. Materials, 2022. 15(14): p. 5069.
- Tuli, N.T., S. Khatun, and A.B. Rashid, Unlocking the future of precision manufacturing: A comprehensive exploration of 3D printing with fiber-reinforced composites in aerospace, automotive, medical, and consumer industries. Heliyon, 2024.
- Kausar, A. and I. Ahmad, Nanocomposites of nanocarbon functionalized carbon fibers— manufacturing to methodological applications. Advances in Materials Science, 2024. 24(1): p. 46-71.
- Ma, T., et al., Repairing surface defects of carbon fibers: Electrostatic spraying nano-carbons on stabilized PAN-fibers and subsequent thermal annealing. Surfaces and Interfaces, 2024. 52: p. 104783.
- Li, C.X., et al., Manufacturing Autoclave-Grade Thermoset Carbon Fiber-Reinforced Polymer Aerospace Composites without an Autoclave Using Nanoporous Materials. ACS Applied Materials & Interfaces, 2024. 16(19): p. 25280-25293.
- Qaidi, S.M., et al., Recycling of mine tailings for the geopolymers production: A systematic review. Case Studies in Construction Materials, 2022. 16: p. e00933.
- Qaidi, S.M., et al., Engineering properties of sustainable green concrete incorporating eco-friendly aggregate of crumb rubber: A review. Journal of Cleaner Production, 2021. 324: p. 129251.