References
- K. Kofiani, A. Nonn, and T. Wierzbicki, “New calibration method for high and low triaxiality and validation onSENT specimens of API X70,” Int. J. Press. Vessel. Pip., vol. 111–112, pp. 187–201, 2013, doi: 10.1016/j.ijpvp.2013.07.004.
- A. Muñoz, J. Genesca, R. Duran, and J. Mendoza, “Mechanism of FeCO3 formation on API X70 pipeline steel in brine solutions containing CO2,” NACE - Int. Corros. Conf. Ser., vol. 2005-April, no. July 2016, 2005, doi: 10.13140/RG.2.1.3814.8085.
- M. Mohammadijoo, J. Valloton, L. Collins, H. Henein, and D. G. Ivey, “Characterization of martensite-austenite constituents and micro-hardness in intercritical reheated and coarse-grained heat affected zones of API X70 HSLA steel,” Mater. Charact., vol. 142, pp. 321–331, 2018, doi: 10.1016/j.matchar.2018.05.057.
- T. S. Ajmal, S. B. Arya, L. R. Thippeswamy, M. A. Quraishi, and J. Haque, “Influence of green inhibitor on flow-accelerated corrosion of API X70 line pipe steel in synthetic oilfield water,” Corros. Eng. Sci. Technol., vol. 55, no. 6, pp. 487–496, 2020, doi: 10.1080/1478422X.2020.1745355.
- S. Arzola-Peralta, J. Mendoza-Flores, R. Duran-Romero, and J. Genesca, “Cathodic kinetics of API X7o pipeline steel corrosion in H2S containing solutions under turbulent flow conditions,” Corros. Eng. Sci. Technol., vol. 41, no. 4, pp. 321–327, 2006, doi: 10.1179/174327806X139117.
- S. Y. Shin, B. Hwang, S. Lee, and K. B. Kang, “Effects of notch shape and specimen thickness on drop-weight tear test properties of API X70 and X80 line-pipe steels,” Metall. Mater. Trans. A Phys. Metall. Mater. Sci., vol. 38, no. 3, pp. 537–551, 2007, doi: 10.1007/s11661-006-9073-6.
- S. Arzola and J. Genescá, “The effect of H2S concentration on the corrosion behavior of API 5L X-70 steel,” J. Solid State Electrochem., vol. 9, no. 4, pp. 197–200, 2005, doi: 10.1007/s10008-004-0579-9.
- S. Arzola, J. Mendoza-Flores, R. Duran-Romero, and J. Genesca, “Electrochemical behavior of API X70 steel in hydrogen sulfide-containing solutions,” Corrosion, vol. 62, no. 5, pp. 433–443, 2006, doi: 10.5006/1.3278280.
- M. S. Weglowski et al., “A comprehensive study on the microstructure and mechanical properties of arc girth welded joints of spiral welded high strength API X70 steel pipe,” Arch. Civ. Mech. Eng., vol. 20, no. 1, pp. 1–18, 2020, doi: 10.1007/s43452-020-00018-0.
- T. T. Nguyen, H. M. Heo, J. Park, S. H. Nahm, and U. B. Beak, “Fracture properties and fatigue life assessment of API X70 pipeline steel under the effect of an environment containing hydrogen,” J. Mech. Sci. Technol., vol. 35, no. 4, pp. 1445–1455, 2021, doi: 10.1007/s12206-021-0310-0.
- L. R. Jacobo, R. García-Hernández, V. H. López-Morelos, and A. Contreras, “Effect of Acicular Ferrite and Bainite in API X70 Steel Obtained After Applying a Heat Treatment on Corrosion and Cracking Behaviour,” Met. Mater. Int., vol. 27, no. 10, pp. 3750–3764, 2021, doi: 10.1007/s12540-020-00805-7.
- H. M. Lieth, R. Al-Sabur, R. J. Jassim, and A. Alsahlani, “Enhancement of corrosion resistance and mechanical properties of API 5L X60 steel by heat treatments in different environments,” J. Eng. Res., vol. 9, no. 4 B, pp. 428–440, 2021, doi: 10.36909/jer.14591.
- G. Martinez, Ricardo, F. Pulido, Jecsan, et al., “Imidazoline behavior as corrosion inhibitor in the electrochemical characterization of SCC behavior of an API X70 steel exposed to brine solution” Corrosion Reviews 41, no. 4 (2023): 455–471. https://doi.org/10.1515/corrrev-2022-0056.
- S. H. M. Anijdan, M. Sabzi, N. Park, and U. Lee, “Sour corrosion performance and sensitivity to hydrogen induced cracking in the X70 pipeline steel: Effect of microstructural variation and pearlite percentage,” Int. J. Press. Vessel. Pip., vol. 199, p. 104759, Oct. 2022, doi: 10.1016/J.IJPVP.2022.104759.
- R. Khatib Zadeh Davani et al., “Crystallographic texture and the mechanical properties of API 5L X70 pipeline steel designated for an arctic environment,” Mater. Sci. Eng. A, vol. 889, p. 145849, Jan. 2024, doi: 10.1016/J.MSEA.2023.145849.
- Y. Desalegn A., M. G. Jiru, H. G. Lemu, and M. A. Tolcha. “Internal Corrosion Damage Mechanisms of the Underground Ferrous Water Pipelines.” Adv. Sci. Technol. Res. J., vol. 16, no. 3, pp. 111–123, 2022, doi: 10.12913/22998624/149369.
- O. O. Temitayo, H. Vawe, J. Johnson, E. Adewole, and O. Ilesanmi, “Investigation on Corrosion Inhibition of Hura Crepitans for 2101 Duplex Stainless Steel in an Acidic Environment,” Adv. Sci. Technol. Res. J., vol. 16, no. 4, pp. 56–63, 2022, doi: 10.12913/22998624/151693.
- Atapek, Ş.H., Polat, Ş. & Zor, S. Effect of tempering temperature and microstructure on the corrosion behavior of a tempered steel. Prot Met Phys Chem Surf 49, 240–246 (2013). https://doi.org/10.1134/S2070205113020111.
- B. Hwang, Y. G. O. N. Kim, S. Lee, Y. M. I. N. Kim, N. J. Kim, and J. Y. Yoo, “Effective Grain Size and Charpy Impact Properties of High-Toughness X70 Pipeline Steels,” no. August, 2005, doi: 10.1007/s11661-005-0331-9.
- M. Alizadeh and S. Bordbar, “Applying a novel heat treatment cycle to modify the microstructure of welded API X70 pipeline steel,” Mater. Lett., vol. 98, pp. 178–181, 2013, doi: 10.1016/j.matlet.2013.02.049.
- M. C. Jo et al., “Effects of coiling temperature and pipe-forming strain on yield strength variation after ERW pipe forming of API X70 and X80 linepipe steels,” Mater. Sci. Eng. A, vol. 682, no. November 2016, pp. 304–311, 2017, doi: 10.1016/j.msea.2016.11.065.
- O. Ghelloudj et al., “Reliability Estimation of Cracked API 5L X70 Pipeline Steel,” J. Phys. Conf. Ser., vol. 1818, no. 1, p. 9, 2021, doi: 10.1088/1742-6596/1818/1/012164.
- L. Sharma and R. Chhibber, “Effect of Heat Treatment on Mechanical Properties and Corrosion Behaviour of API X70 Linepipe Steel in Different Environments,” Trans. Indian Inst. Met., vol. 72, no. 1, pp. 93–110, Jan. 2019, doi: 10.1007/S12666-018-1465-Y/METRICS.
- H. Yu, “Influences of microstructure and texture on crack propagation path of X70 acicular ferrite pipeline steel,” J. Univ. Sci. Technol. Beijing Miner. Metall. Mater. (Eng Ed), vol. 15, no. 6, pp. 683–687, 2008, doi: 10.1016/S1005-8850(08)60271-6.
- S. I. Lee, S. Y. Lee, S. G. Lee, H. G. Jung, and B. Hwang, “Effect of Strain Aging on Tensile Behavior and Properties of API X60, X70, and X80 Pipeline Steels,” Met. Mater. Int., vol. 24, no. 6, pp. 1221–1231, 2018, doi: 10.1007/s12540-018-0173-9.
- T. M. Ike, O. Adedipe, M. S. Abolarin, and S. A. Lawal, “Mechanical Characterization of Welded API X70 Steel Exposed to Air and Seawater: A review,” IOP Conf. Ser. Mater. Sci. Eng., vol. 413, no. 1, 2018, doi: 10.1088/1757-899X/413/1/012034.
- L. M. T. Costa, G. N. de Melo, N. A. Castro, and A. J. de A. Buschinelli, “Microstructural characterization of API 5L X65 and X70 steels manufactured by TMCP process,” Tecnol. em Metal. Mater. e Mineração, vol. 19, no. 1, p. e2511, 2022, doi: 10.4322/2176-1523.20222511.
- N. Mohamed, I. Jawhar, J. Al-Jaroodi, and L. Zhang, “Sensor network architectures for monitoring underwater pipelines,” Sensors, vol. 11, no. 11, pp. 10738–10764, 2011, doi: 10.3390/s111110738.
- W. Zhao, T. Zhang, Y. Wang, J. Qiao, and Z. Wang, “Corrosion failure mechanism of associated gas transmission pipeline,” Materials (Basel)., vol. 11, no. 10, 2018, doi: 10.3390/ma11101935.
- M. M. Shaban, A. M. Eid, R. K. Farag, N. A. Negm, A. A. Fadda, and M. A. Migahed, “Novel trimeric cationic pyrdinium surfactants as bi-functional corrosion inhibitors and antiscalants for API 5L X70 carbon steel against oilfield formation water,” J. Mol. Liq., vol. 305, p. 112817, 2020, doi: 10.1016/j.molliq.2020.112817.
- M. A. Mohtadi-Bonab, J. A. Szpunar, L. Collins, and R. Stankievech, “Evaluation of hydrogen induced cracking behavior of API X70 pipeline steel at different heat treatments,” Int. J. Hydrogen Energy, vol. 39, no. 11, pp. 6076–6088, 2014, doi: 10.1016/j.ijhydene.2014.01.138.
- M. Masoumi, L. Flavio, G. Herculano, H. Ferreira, and G. De Abreu, “Materials Science & Engineering A Study of texture and microstructure evaluation of steel API 5L X70 under various thermomechanical cycles,” Mater. Sci. Eng. A, vol. 639, pp. 550–558, 2015, doi: 10.1016/j.msea.2015.05.020.
- S. H. Mousavi Anijdan, G. Arab, M. Sabzi, M. Sadeghi, A. R. Eivani, and H. R. Jafarian, “Sensitivity to hydrogen induced cracking, and corrosion performance of an API X65 pipeline steel in H2S containing environment: influence of heat treatment and its subsequent microstructural changes,” J. Mater. Res. Technol., vol. 15, pp. 1–16, Nov. 2021, doi: 10.1016/j.jmrt.2021.07.118.
- E. S. D. De Oliveira, R. F. Da Costa Pereira, I. R. De Melo, M. A. G. De Andrade Lima, and S. L. U. Filho, “Corrosion behavior of API 5L X80 steel in the produced water of onshore oil recovery facilities,” Mater. Res., vol. 20, pp. 432–439, 2017, doi: 10.1590/1980-5373-mr-2016-0954.
- V. Venegas, F. Caleyo, J. L. González, T. Baudin, J. M. Hallen, and R. Penelle, “EBSD study of hydrogen-induced cracking in API-5L-X46 pipeline steel,” Scr. Mater., vol. 52, no. 2, pp. 147–152, 2005, doi: 10.1016/j.scriptamat.2004.09.015.
- D. Pérez Escobar, C. Miñambres, L. Duprez, K. Verbeken, and M. Verhaege, “Internal and surface damage of multiphase steels and pure iron after electrochemical hydrogen charging,” Corros. Sci., vol. 53, no. 10, pp. 3166–3176, 2011, doi: 10.1016/j.corsci.2011.05.060.
- H. K. Birnbaum and P. Sofronis, “Hydrogen-enhanced localized plasticity-a mechanism for hydrogen-related fracture,” Mater. Sci. Eng. A, vol. 176, no. 1–2, pp. 191–202, 1994, doi: 10.1016/0921-5093(94)90975-X.
- G. Ghosh, P. Rostron, R. Garg, and A. Panday, “Hydrogen induced cracking of pipeline and pressure vessel steels: A review,” Eng. Fract. Mech., vol. 199, pp. 609–618, 2018, doi: 10.1016/j.engfracmech.2018.06.018.
- M. A. Mohtadi-Bonab, M. Eskandari, and J. A. Szpunar, “Texture, local misorientation, grain boundary and recrystallization fraction in pipeline steels related to hydrogen induced cracking,” Mater. Sci. Eng. A, vol. 620, pp. 97–106, 2015, doi: 10.1016/j.msea.2014.10.009.
- M. A. Mohtadi-Bonab, J. A. Szpunar, and S. S. Razavi-Tousi, “A comparative study of hydrogen induced cracking behavior in API 5L X60 and X70 pipeline steels,” Eng. Fail. Anal., vol. 33, pp. 163–175, 2013, doi: 10.1016/j.engfailanal.2013.04.028.
- Y. Aprael S., K. R. Abdul-Khalik, and A.A. Khadom. “Effect of CO2 corrosion behavior of mild steel in oilfield produced water.” J. of Loss Prev. in the Proc. Ind., vol. 38, pp. 24–38, 2015, doi: 10.1016/j.jlp.2015.08.003.