References
- 1. Amini K., Jalalpour M., Delatte N: Advancing concrete strength prediction using non-destructive testing: development and verification of a generalizable model. Construction and Building Materials 102 (2016) 762-768.
- 2. Fladr J., Bílý P: Specimen size effect on compressive and flexural strength of high-strength fibre-reinforced concrete containing coarse aggregate. Composites Part B-Engineering 138 (2018) 77-86.
- 3. Thermou GE., Hajirasouliha I: Compressive behaviour of concrete columns confined with steel-reinforced grout jackets. Composites Part B-Engineering 138 (2018) 222-231.
- 4. Indelicato F: A statistical method for the assessment of concrete strength through microcores. Materials and Structures 26 (1993) 261-267.
- 5. ASTM C42/C 42M-04. Standard test of obtaining and testing drilled cores and sawed beams of concrete, American Society for Testing and Materials. 2004.
- 6. EN 13791:2007. Assessment of in-situ compressive strength in structures and precast concrete components, September 2007.
- 7. ISO/DIS 7032. Cores of hardened concrete-Taking examination and testing in compression, Draft International Standard, International Organization of Standardization. 1983.
- 8. DIN 1048 Teil 2. Prüfverfahren Ftir Beton. Bestimmung der Bruchfestigkeit von Festbeton in Bauwerken und Bauteilen, (Deutsches Institut Ftir Normung, Berlin. 1991.
- 9. ACI Committee 301. Specification for Structural Concrete for Buildings. ACI 301-84 American Concrete Institute, Detroit. 1984.
- 10. Seong-Tae Y., Eun-Ik Y., Joong-Cheol C: Effect of sizes, specimen shapes, and placement directions on compressive strength of concrete. Nuclear Engineering and Design 236 (2006) 116-127.
- 11. Indelicaton F: Estimation of concrete cube strength by means of different diameter cores: A stastical approach. Materials and Structures 24 (1997) 131-138.
- 12. Nedjar B: Damage mechanics: first gradient theory and application to concrete. PhD Thesis. National School of Bridges and Roads. Paris. France. 1995.
- 13. Alwash M., Breysse D., Sbartaï ZM: Nondestructive strength evaluation of concrete: analysis of some key factors using synthetic simulations. Construction and Building Materials 99 (2015) 235-245.
- 14. Ali-Benyahia K., Sbartai ZM., Breysse D., Kenai S., Ghrici M: Analysis of the single and combined non-destructive test approaches for on-site concrete strength assessment: general statements based on a real case-study. Case Studies in Construction Materials 6 (2017) 106-119.
- 15. Ali-Benyahia K., Sbartaï ZM., Breysse D., Ghrici M., Kenai S: Improvement of nondestructive assessment of on-site concrete strength: Influence of the selection process of cores location on the assessment quality for single and combined NDT techniques. Construction and Building Materials 195 (2019) 613-622.
- 16. Bungey JH: Determining concrete strength by using small diameter cores. Magazine of Concrete Research 31 (1979) 91-98.
- 17. Bocca P: Sul microcarotaggio - Basi teoriche e prime esperienze. La Prefabbricazione 22(1986) 651-664.
- 18. Bocca P., Indelicato F: Size effects and statistical problems of microcores in the re-evaluation of existing structures. In Proceedings of DABI Symposium, Copenhagen, pp. 463-472. June 1988.
- 19. Elices M., Rocco C.G: Effect of aggregate size on the fracture and mechanical properties of a simple concrete. Engineering Fracture Mechanics 10 (2008) 2-11.
- 20. Sima J., Yangb K.H., Jeonc J.K: Influence of aggregate size on the compressive size effect according to different concrete types. Construction and Building Materials 44 (2013) 716-725.
- 21. Jin L., Yu WX., Du XL., Zhang S., Li D: Meso-scale modelling of the size effect on dynamic compressive failure of concrete under different strain rates. International Journal of Impact Engineering. 125 (2019) 1-12.
- 22. Wu ZY., Zhang JH., Yu HF., Ma HY: 3D mesoscopic investigation of the specimen aspect-ratio on coral aggregate concrete. Composites Part B-Engineering 198 (2020) 108025.
- 23. Jin L., Yu WX., Du XL., Yang WX: Meso-scale simulations of size effect on concrete dynamic splitting tensile strength: influence of aggregate content and maximum aggregate size Engineering. Fracture Mechanics 230 (2020) 106979.
- 24. Jin L., Yu WX., Du XL., Yang WX: Mesoscopic numerical simulation of dynamic size effect on the splitting-tensile strength of concrete. Engineering Fracture Mechanics 209(2019) 317-332.
- 25. Wang X., Zhang S., Wang C., Song R., Shang C, Fang X: Experimental investigation of the size effect of layered roller compacted concrete (RCC) under high-strain-rate loading. Construction and Building Materials 165 (2018) 45-57.
- 26. Li M., Hao H., Shi Y., Hao Y: Specimen shape and size effects on the concrete compressive strength under static and dynamic tests. Construction and Building Materials 161 (2018) 84-93.
- 27. Zhangyu W., Jinhua Z., Hongfa Y., Haiyan M., Li C., Wen D., Yi H., Yadong Z: Coupling effect of strain rate and specimen size on the compressive properties of coral aggregate concrete: A 3D mesoscopic study. Composites Part B-Engineering 200 (2020) 108299.
- 28. BS 1881: Part 110, Part 110. Method for making test cylinders from fresh concrete, British Standard Institution, London. 1983.