References
- 1. Fonstein, N.: Dual-phase steels. Automotive Steels. Woodhead Publishing (2017). https://doi.org/10.1016/B978-0-08-100638-2.00007-9
- 2. Mazaheri, Y.; Kermanpur A.; Najafizadeh, A.: A novel route for the development of ultrahigh strength dual phase steels. Mater Sci Eng A. 619 (2014) 1–11.
- 3. Li, L.: Microstructure and property control of advanced high strength automotive steels. In: Weng Y., Dong H., Gan Y. (eds) Advanced Steels. Springer, Berlin, Heidelberg, 2011.10.1007/978-3-642-17665-4_27
- 4. Rajarajan, C.; Sivaraj, P.; Balasubramanian, V.: Microstructural characteristics and load carrying capability of resistance spot welded dual phase (DP800) steel joints. J Adv Micro Res 13 (2018) 198–203.
- 5. Nesterova, E.V.; Bouvier, S.; Bacroix, B.: Microstructure evolution and mechanical behavior of a high strength dual-phase steel under monotonic loading. Mater. Charact. 100 (2015) 152–162.
- 6. Zhang, P.; Xie, J.; Wang, Y. X.; Chen, J. Q.: Effects of welding parameters on mechanical properties and microstructure of resistance spot welded DP600 joints. Sci Technol Weld Join 16 (2011) 567–574.
- 7. Shome, M.; Tumuluru, M.: Welding and joining of Advanced High Strength Steels (AHSS) resistance spot welding techniques for advanced high-strength steels (AHSS). Woodhead publishing, Cambridge, UK, 2015.
- 8. Ambroziak, A.; Korzeniowski, M.: Using resistance spot welding for joining aluminium elements in automotive industry. Arch Civ Mech Eng. 10 (2010) 5–13.
- 9. Liao, X.; Wang, X.; Guo, Z.; Wang, M.; Wu, Y.; Rong, Y.: Microstructures in a resistance spot welded high strength dual phase steel. Mater Charact 61 (2010) 341–346.
- 10. Yuan, X.; Li, C.; Chen, J.; Li, X.; Liang, X.; Pan, X.: Resistance spot welding of dissimilar DP600 and DC54D steels. J Mater Process Technol. 239 (2017) 31–41.
- 11. Kishore, K.; Kumar, P.; Mukhopadhyay, G.: Insights on microstructure and failure characteristics of resistance spot welds of galvannealed dual phase steel. J Mater Eng Perform. (2022) 1–19.
- 12. Aydın, E.; Ertan, R. Shunting effects on the resistance spot welding parameters of DP600. Mater Test. 62 (2020) 97–103
- 13. Janardhan, G.; Dutta, K.; Mukhopadhyay, G. Influence of work hardening on tensile and fatigue behavior of resistance spot-welded dual-phase steel. J Mater Eng Perform. (2022) 1-14.10.1007/s11665-022-07117-4
- 14. Kishore, K.; Kumar, P.; Mukhopadhyay, G.: Microstructure, tensile and fatigue behaviour of resistance spot welded zinc coated dual phase and interstitial free steel. Met Mater Inter. 28 (2022), 945–965.
- 15. Sevim, I.: Newly revealed features of fracture toughness behavior of spot welded dual phase steel sheets for automotive bodies. Mater Test. 57 (2015) 960–967
- 16. Yaghoobi, F.; Jamaati, R.; Aval, H. J.: Resistance spot welding of high-strength DP steel and nano/ultrafine-grained IF steel sheets. Mater. Chem. Phy. 281 (2022) 125909.
- 17. Javaheri, E.; Pittner, A.; Graf, B.; Rethmeier, M.: Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests. Mater. Test. 61 (2019) 527–532.
- 18. Elitas, M.; Demir, B.; Residual stress evaluation during RSW of DP600 sheet steel. Mater. Test. 62 (2020) 888–890.
- 19. Marwan, K.; Kaçar, R.: Optimization of welding parameters for DP600/TRIP800 dissimilar joints. Mater Test. 60 (2018) 40–48.
- 20. Elitas, M.: Effects of welding parameters on tensile properties and fracture modes of resistance spot welded DP1200 steel. Mater Test. 63 (2021) 124–130.
- 21. Önal, A. S.; Kaya, N.: Effect and optimization of resistance spot welding parameters on the strength of welded hot-stamped parts. Mater Test. 56 (2014), 466–471.
- 22. Cavdar, F. Y.; Yasar, H.; Cavdar, K.: Effect of the welding parameters on the surface morphology of resistance spot welded AISI 304 stainless steel joints. Mater Test. 62 (2020) 739–743.
- 23. Sonar, T.; Balasubramanian, V.; Malarvizhi, S.; Venkateswaran, T.; Sivakumar, D. Development of 3-Dimensional (3D) response surfaces to maximize yield strength and elongation of InterPulsed TIG welded thin high temperature alloy sheets for jet engine applications. CIRP J Manuf Sci Technol. 31 (2020) 628–642.
- 24. Sonar, T.; Balasubramanian, V.; Malarvizhi, S.; Venkateswaran, T.; Sivakumar, D.: Multi-response mathematical modelling, optimization and prediction of weld bead geometry in gas tungsten constricted arc welding (GTCAW) of Inconel 718 alloy sheets for aero-engine components. Multiscale Multidiscipl Model, Exp Design, 3 (2020), 201–226.
- 25. Sonar, T.; Balasubramanian, V.; Malarvizhi, S.; Venkateswaran, T.; Sivakumar, D.: Maximizing strength and corrosion resistance of InterPulsed TIG welded Superalloy 718 joints by RSM for aerospace applications. CIRP J Manuf Sci Technol, 35 (2021) 474–493.
- 26. AnandhaKumar, C. J.; Mohan, D. G.: Predicting the ultimate tensile strength and wear rate of aluminium hybrid surface composites fabricated via friction stir processing using computational methods. J Adh Sci Technol. 36 (2022), 1707–1726.
- 27. Mohan, D. G.; Tomków, J.; Karganroudi, S. S.: Laser Welding of UNS S33207 Hyper-Duplex Stainless Steel to 6061 Aluminum Alloy Using High Entropy Alloy as a Filler Material. Appl Sci. 12 (2022) 2849.
- 28. Mohan, D. G.; Gopi, S.: Optimized parameters prediction for single-pass friction stir welding on dissimilar aluminium alloys T-joint. Inter J Emer Technol 12 (2021).
- 29. Ramazani, A.; Mukherjee, K.; Abdurakhmanov, A.; Abbasi, M.; Prahl, U.; Characterization of microstructure and mechanical properties of resistance spot welded DP600 steel. Met. 5 (2015) 1704–1716.
- 30. Kishore K.; Kumar, P.; Mukhopadhyay, G.: Resistance spot weldability of galvannealed and bare DP600 steel. J Mater Process Technol. 271 (2019) 237–248.
- 31. Aslanlar, S.; Ogur, A.; Ozsarac, U.; Ilhan, E.: Welding time effect on mechanical properties of automotive sheets in electrical resistance spot welding. Mater. Des. 29 (2008) 1427–1431.
- 32. Baltazar Hernandez, V. H.; Panda, S. K.; Okita, Y.; Zhou, N. Y.: A study on heat affected zone softening in resistance spot welded dual phase steel by nanoindentation. J Mater Sci. 45 (2010) 1638–1647.