References
- 1. Zielecki, W., Kubit, A., Trzepieciński, T., Narkiewicz, U., Czech, Z.: Impact of multiwall carbon nanotubes on the fatigue strength of adhesive joints. Int. J. Adhes. Adhes., 73 (2017) 16-21.
- 2. Kłonica, M., Bielawski, R., Żokowski, M.: Comparative tests of shear strength of adhesive lap joints after thermal shocks. Adv. Sci. Technol. Res. J., 15 (2021) 364-375.
- 3. Miturska, I.: Impact of assembly method on the strength of single-lap joints of aircraft aluminum alloy sheets. Adv. Sci. Technol. Res. J., 14 (2020) 163-170.
- 4. Bendemra, H., Compston, P., Crothers, P.J.: Optimisation study of tapered scarf and stepped-lap joints in composite repair patches. Compos. Struct., 130 (2015) 1–8.
- 5. Kadioglu, F., Adams, R.D.: Flexible adhesives for automotive application under impact loading. Int. J. Adhes. Adhes., 56 (2015) 73–78.
- 6. Karachalios, E.F., Adams, R.D., da Silva, L.F.M.: The behaviour of single lap joints under bending loading. J. Adhes. Sci. Technol., 27 (2013) 1811–1827.
- 7. Bartczak B., Mucha J., Trzepieciński T.: Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry. Int. J. Adhes. Adhes., 45 (2013) 42–52.
- 8. da Silva, L.F.M., Ochsner, A., Adams, R.D., editors. Handbook of adhesion technology. Heidelberg: Springer, (2011).
- 9. Zhao, X., Adams, R.D., da Silva, L.F.M.: Single lap joints with rounded adherend corners: stress and strain analysis. J. Adhes. Sci. Technol., 25 (2011) 819–836.
- 10. Zhao, X., Adams, R.D., da Silva, L.F.M.: Single lap joints with rounded adherend corners: experimental results and strength prediction. J. Adhes. Sci. Technol., 25 (2011) 837–856.
- 11. Marques, E.A.S., da Silva, L.F.M.: Joint strength optimization of adhesively bonded patches. J. Adhes., 84 (2008) 915–934.
- 12. Campilho, R.D.S.G., De Moura, M., Domingues, J.: Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes. Int. J. Adhesion. Adhes., 29 (2009) 195–205.
- 13. Haghani, R., Al-Emrani, M., Kliger, R.: Stress distribution in adhesive joints with tapered laminates—effect of tapering length and material properties. J. Compos. Mater., 44 (2010) 287–302.
- 14. Kim, K.S., Yoo, J.S., Yi, Y.M., Kim, C.G.: Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods. Compos. Struct., 72 (2006) 477–85.
- 15. Belingardi, G., Goglio, L., Tarditi, A.: Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints. Int. J. Adhesion. Adhes., 22 (2002) 273–82.
- 16. Rispler, A. R., Tong, L., Steven, G. P., Wisnom, M. R.: Shape optimisation of adhesive fillets. Int. J. Adhesion Adhes., 20 (2000) 221–231.
- 17. Belingardi, G., Goglio, L., and Tarditi, A.: Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints. Int. J. Adhesion Adhes., 22 (2002) 273–282.
- 18. Neto, J.A.B.P., Campilho, R.D.S.G., da Silva, L.F.M.: Parametric study of adhesive joints with composites. Int. J. Adhesion Adhes., 37 (2012) 96–101.
- 19. Da Silva, L.F.M., Lopes, M.J.C.: Joint strength optimization by the mixed-adhesive technique. Int. J. Adhesion. Adhes., 29 (2009) 509–14.
- 20. Zielecki, W., Kubit, A., Kluz, R., Trzepieciński, T.: Investigating the influence of the chamfer and fillet on the high-cyclic fatigue strength of adhesive joints of steel parts. J Adhes Sci Technol., 31 (2017) 627-644.
- 21. Moya-Sanz, E.M., Ivanez, I., Garcia-Castillo, S.K.: Effect of the geometry in the strength of single-lap adhesive joints of composite laminates under uniaxial tensile load. Int. J. Adhesion Adhes., 72 (2017) 23–9.
- 22. Gray, P.J., O’Higgins, R.M., McCarthy, C.T.: Effect of thickness and laminate taper on the stiffness, strength and secondary bending of single-lap, single-bolt countersunk composite joints. Compos. Struct., 107 (2014) 315–24.
- 23. Lucas, F.M.: Design Rules and Methods to Improve Joint Strength. Springer-Verlag Berlin Heidelberg (2011).
- 24. ISO 6892-1: Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature. International Organization for Standardization, Geneva, (2016) 1–79.
- 25. ASTM B209M-Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate; ASTM International: West Conshohocken, (2014) PA, USA.
- 26. da Silva, L.F.M., das Neves, P.J.C., Adams, R.D., Spelt, J.K.: Analytical models of adhesively bonded joints part I: literature survey. Int. J. Adhesion Adhes., 29(3) (2008) 319-330.
- 27. Banea, M.D., da Silva, L.F.M.: Adhesively bonded joints in composite materials: an overview. Proc. Inst. Mech. Part L: J. Materials: Design and Applications, 223 (2009) 1-18.
- 28. Pinto, A.M.G., Campilho, R.D.S.G., Mendes, I.R., Aires, S.M., Baptista, A.P.M.: Effect of hole drilling at the overlap on the strength of single-lap joints. Int. J. Adhes. Adhes. 31 (2011) 380-387.