The Effects of Nb Addition on the Microstructure and Mechanical Properties of Melt Spun Al-7075 Alloy
References
- 1. S.K. Patel, V.P. Singh, B.S. Roy, B. Kuriachen, Recent research progresses in Al-7075 based in-situ surface composite fabrication through friction stir processing: A review, Mater. Sci. Eng. B Solid-State Mater. Adv. Technol. (2020). https://doi.org/10.1016/j.mseb.2020.114708.10.1016/j.mseb.2020.114708
- 2. Y. Lin, S. Mao, Z. Yan, Y. Zhang, L. Wang, Melt spinning induces sub-micrometric/micrometric grained structure and dislocations in 7075 Al alloy, J. Alloys Compd. (2015). https://doi.org/10.1016/j.jallcom.2015.08.146.10.1016/j.jallcom.2015.08.146
- 3. J.R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM Int. (1993).
- 4. J.R. Davis, Light Metals and Alloys-Aluminum and Aluminum Alloys, Alloy. Underst. Basics. (2001).
- 5. Y. Lin, B. Wu, S. Li, S. Mao, X. Liu, Y. Zhang, L. Wang, The quantitative relationship between microstructure and mechanical property of a melt spun Al-Mg alloy, Mater. Sci. Eng. A. (2015). https://doi.org/10.1016/j.msea.2014.10.047.10.1016/j.msea.2014.10.047
- 6. M. Szymanek, B. Augustyn, D. Kapinos, S. Boczkal, J. Nowak, The production of material with ultrafine grain structure in Al-Zn alloy in the process of rapid solidification, Arch. Foundry Eng. (2014). https://doi.org/10.2478/afe-2014-0037.10.2478/afe-2014-0037
- 7. J. Rakhmonov, G. Timelli, F. Bonollo, Characterization of the solidification path and microstructure of secondary Al-7Si-3Cu-0.3Mg alloy with Zr, V and Ni additions, Mater. Charact. (2017). https://doi.org/10.1016/j.matchar.2017.03.039.10.1016/j.matchar.2017.03.039
- 8. Y. Chen, C.Y. Liu, Z.Y. Ma, H.F. Huang, Y.H. Peng, Y.F. Hou, Effect of Sc addition on the microstructure, mechanical properties, and damping capacity of Al–20Zn alloy, Mater. Charact. (2019). https://doi.org/10.1016/j.matchar.2019.109892.10.1016/j.matchar.2019.109892
- 9. Y. Yang, J.J. Licavoli, S.A. Hackney, P.G. Sanders, Coarsening behavior of precipitate Al3(Sc,Zr) in supersaturated Al-Sc-Zr alloy via melt spinning and extrusion, J. Mater. Sci. (2021). https://doi.org/10.1007/s10853-021-05981-4.10.1007/s10853-021-05981-4
- 10. J. Luo, H. Luo, S. Li, R. Wang, Y. Ma, Effect of pre-ageing treatment on second nucleating of GPII zones and precipitation kinetics in an ultrafine grained 7075 aluminum alloy, Mater. Des. (2020). https://doi.org/10.1016/j.matdes.2019.108402.10.1016/j.matdes.2019.108402
- 11. M.A. Moazam, M. Honarpisheh, Residual stress formation and distribution due to precipitation hardening and stress relieving of AA7075, Mater. Res. Express. (2019). https://doi.org/10.1088/2053-1591/ab59b6.10.1088/2053-1591/ab59b6
- 12. Y. Wang, X. Wu, L. Cao, X. Tong, Y. Zou, Q. Zhu, S. Tang, H. Song, M. Guo, Effect of Ag on aging precipitation behavior and mechanical properties of aluminum alloy 7075, Mater. Sci. Eng. A. (2021). https://doi.org/10.1016/j.msea.2020.140515.10.1016/j.msea.2020.140515
- 13. R. Meshkabadi, G. Faraji, A. Javdani, A. Fata, V. Pouyafar, Microstructure and homogeneity of semi-solid 7075 aluminum tubes processed by parallel tubular channel angular pressing, Met. Mater. Int. (2017). https://doi.org/10.1007/s12540-017-6760-3.10.1007/s12540-017-6760-3
- 14. Y. Zhao, J. Liu, T.D. Topping, E.J. Lavernia, Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation, J. Alloys Compd. (2021). https://doi.org/10.1016/j.jallcom.2020.156931.10.1016/j.jallcom.2020.156931
- 15. B. Binesh, M. Aghaie-Khafri, Modelling and optimization of semi-solid processing of 7075 Al alloy, Mater. Res. Express. (2017). https://doi.org/10.1088/2053-1591/aa8272.10.1088/2053-1591/aa8272
- 16. S.K. Gautam, N. Mandal, H. Roy, A.K. Lohar, S.K. Samanta, G. Sutradhar, Optimization of processing parameters of cooling slope process for semi-solid casting of ADC 12 Al alloy, J. Braz. Soc. Mech. Sci. Eng. (2018). https://doi.org/10.1007/s40430-018-1213-6.10.1007/s40430-018-1213-6
- 17. J. Liu, P. Zeng, S. Kou, Solidification cracking susceptibility of quaternary aluminium alloys, Sci. Technol. Weld. Join. (2021). https://doi.org/10.1080/13621718.2021.1893007.10.1080/13621718.2021.1893007
- 18. S. Marola, D. Manfredi, G. Fiore, M.G. Poletti, M. Lombardi, P. Fino, L. Battezzati, A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy, J. Alloys Compd. (2018). https://doi.org/10.1016/j.jallcom.2018.01.309.10.1016/j.jallcom.2018.01.309
- 19. M.F. Kilicaslan, S.S. Altaib, C.D. Vurdu, Effect of Ni Addition on the Morphology and Microstructure of Both Conventional Cast and Melt-Spun of Al–Si–Fe–Nb (at wt%) Alloy, Met. Mater. Int. (2019). https://doi.org/10.1007/s12540-019-00300-8.10.1007/s12540-019-00300-8
- 20. K. Ma, T. Hu, H. Yang, T. Topping, A. Yousefiani, E.J. Lavernia, J.M. Schoenung, Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al-Zn-Mg alloys, Acta Mater. (2016). https://doi.org/10.1016/j.actamat.2015.09.017.10.1016/j.actamat.2015.09.017
- 21. Y. Yang, J.J. Licavoli, P.G. Sanders, Improved strengthening in supersaturated Al-Sc-Zr alloy via melt-spinning and extrusion, J. Alloys Compd. (2020). https://doi.org/10.1016/j.jallcom.2020.154185.10.1016/j.jallcom.2020.154185
- 22. Q. Liu, M. Liu, C. Xu, W. Xiao, H. Yamagata, S. Xie, C. Ma, Effects of Sr, Ce and P on the microstructure and mechanical properties of rapidly solidified Al–7Si alloys, Mater. Charact. (2018). https://doi.org/10.1016/j.matchar.2018.04.018.10.1016/j.matchar.2018.04.018
- 23. E.J. Lavernia, T.S. Srivatsan, The rapid solidification processing of materials: Science, principles, technology, advances, and applications, J. Mater. Sci. (2010). https://doi.org/10.1007/s10853-009-3995-5.10.1007/s10853-009-3995-5
- 24. H. Jones, A perspective on the developed of rapid solidification and nonequilibrium processing and its future, Mater. Sci. Eng. A. (2001). https://doi.org/10.1016/S0921-5093(00)01552-5.10.1016/S0921-5093(00)01552-5
- 25. X. Meng, D. Zhang, W. Zhang, C. Qiu, G. Liang, J. Chen, Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion, J. Alloys Compd. (2020). https://doi.org/10.1016/j.jallcom.2019.152990.10.1016/j.jallcom.2019.152990
- 26. S. Liu, X. Wang, Q. Zu, B. Han, X. Han, C. Cui, Significantly improved particle strengthening of Al–Sc alloy by high Sc composition design and rapid solidification, Mater. Sci. Eng. A. (2021). https://doi.org/10.1016/j.msea.2020.140304.10.1016/j.msea.2020.140304
- 27. V. Hotea, J. Juhasz, F. Cadar, Grain refinement of 7075Al alloy microstructures by inoculation with Al-Ti-B master alloy, in: IOP Conf. Ser. Mater. Sci. Eng., 2017. https://doi.org/10.1088/1757-899X/200/1/012029.10.1088/1757-899X/200/1/012029
- 28. F. Wang, D. Qiu, Z.L. Liu, J.A. Taylor, M.A. Easton, M.X. Zhang, Crystallographic study of grain refinement of Al by Nb addition, J. Appl. Crystallogr. (2014). https://doi.org/10.1107/S1600576714004476.10.1107/S1600576714004476
- 29. M. Nowak, L. Bolzoni, N. Hari Babu, Grain refinement of Al-Si alloys by Nb-B inoculation. Part I: Concept development and effect on binary alloys, Mater. Des. (2015). https://doi.org/10.1016/j.matdes.2014.08.066.10.1016/j.matdes.2014.08.066
- 30. S. V. Emani, J. Benedyk, P. Nash, D. Chen, Double aging and thermomechanical heat treatment of AA7075 aluminum alloy extrusions, J. Mater. Sci. (2009). https://doi.org/10.1007/s10853-009-3879-8.10.1007/s10853-009-3879-8
- 31. P.B. Prakash, K.B. Raju, K. Venkatasubbaiah, N. Manikandan, Microstructure Analysis and Evaluation of Mechanical Propertiesof Al 7075 GNP’s Composites, in: Mater. Today Proc., 2018. https://doi.org/10.1016/j.matpr.2018.03.010.10.1016/j.matpr.2018.03.010
- 32. C.M. Allen, K.A.Q. O’Reilly, P.V. Evans, B. Cantor, The effect of vanadium and grain refiner additions on the nucleation of secondary phases in 1XXX A1 alloys, Acta Mater. (1999). https://doi.org/10.1016/S1359-6454(99)00250-5.10.1016/S1359-6454(99)00250-5
- 33. C. Shi, L. Zhang, G. Wu, X. Zhang, A. Chen, J. Tao, Effects of Sc addition on the microstructure and mechanical properties of cast Al-3Li-1.5Cu-0.15Zr alloy, Mater. Sci. Eng. A. (2017). https://doi.org/10.1016/j.msea.2016.10.063.10.1016/j.msea.2016.10.063
- 34. M.F. Kiliçaslan, F. Yilmaz, S. Ergen, S.J. Hong, O. Uzun, Microstructure and microhardness of melt-spun Al-25Si-5Fe-XCo (X = 0, 1, 3, 5) alloys, Mater. Charact. (2013). https://doi.org/10.1016/j.matchar.2012.12.006.10.1016/j.matchar.2012.12.006
- 35. Y.C. Lee, A.K. Dahle, D.H. StJohn, J.E.C. Hutt, The effect of grain refinement and silicon content on grain formation in hypoeutectic Al-Si alloys, Mater. Sci. Eng. A. (1999). https://doi.org/10.1016/S0921-5093(98)00884-3.10.1016/S0921-5093(98)00884-3
- 36. S.-J. Hong, C. Suryanarayana, Mechanical properties and fracture behavior of an ultrafine-grained Al-20 wt pct Si alloy, Metall. Mater. Trans. A. (2005). https://doi.org/10.1007/s11661-005-0187-z.10.1007/s11661-005-0187-z
Language: English
Page range: 16 - 25
Published on: Jul 1, 2021
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2021 Muhammed Fatih Kilicaslan, Saad Ibrahim Elburni, Bekir Akgul, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.