References
- 1. Drobny, J.G.: Handbook of thermoplastic elastomers. Elsevier (2014).10.1016/B978-0-323-22136-8.00013-2
- 2. Kausar, A.: Polyamide 1010/polythioamide blend reinforced with graphene nanoplatelet for automotive part application. Advances in Materials Science 17 (2017) 24-36.10.1515/adms-2017-0013
- 3. Katunin, A., Krukiewicz, K., Herega, A. and Catalanotti, G.: 2016. Concept of a conducting composite material for lightning strike protection. Advances in Materials Science 16 (2016) 32-46.10.1515/adms-2016-0007
- 4. Musztyfaga-Staszuk, M., Czupryński, A. and Kciuk, M.: Investigation of mechanical and anti-corrosion properties of flame sprayed coatings. Advances in Materials Science 18 (2018) 42-53.10.1515/adms-2017-0049
- 5. Murthy, N.S.: Hydrogen bonding, mobility, and structural transitions in aliphatic polyamides. Journal of Polymer Science Part B: Polymer Physics 44(2006) 1763-1782.10.1002/polb.20833
- 6. Majumdar, B., Keskkula, H. and Paul, D.R.: Morphology development in toughened aliphatic polyamides. Polymer 35(1994) 1386-1398.10.1016/0032-3861(94)90338-7
- 7. Yang, C.Q., Wang, X.L., Jiao, Y.J., Ding, Y.L., Zhang, Y.F. and Wu, Z.S.: Linear strain sensing performance of continuous high strength carbon fibre reinforced polymer composites. Composites Part B: Engineering 102 (2016) 86-93.10.1016/j.compositesb.2016.07.013
- 8. Yin, J., Liu, R.G., Huang, J.J., Liang, G., Liu, D. and Xie, G.H.: Comparative study on piezoresistive properties of CFRP tendons prepared by two different methods. Composites Part B: Engineering 129 (2017) 124-132.10.1016/j.compositesb.2017.07.064
- 9. Tibbetts, G.G. and McHugh, J.J.: Mechanical properties of vapor-grown carbon fiber composites with thermoplastic matrices. Journal of Materials Research 14 (1999) 2871-2880.10.1557/JMR.1999.0383
- 10. Ozkan, C., Karsli, N.G., Aytac, A. and Deniz, V.: Short carbon fiber reinforced polycarbonate composites: Effects of different sizing materials. Composites Part B: Engineering, 62 (2014) 230-235.10.1016/j.compositesb.2014.03.002
- 11. Naskar, A.K., Keum, J.K. and Boeman, R.G.: Polymer matrix nanocomposites for automotive structural components. Nature nanotechnology, 11 (2016) 1026.10.1038/nnano.2016.262
- 12. Kovács, T.A., Nyikes, Z. and Figuli, L.: Development of a Composite Material for Impact Load. Acta Materialia Transylvanica, 2 (2019) 105-109.10.33924/amt-2019-02-07
- 13. Ma, Y., Yang, Y., Sugahara, T. and Hamada, H.: A study on the failure behavior and mechanical properties of unidirectional fiber reinforced thermosetting and thermoplastic composites. Composites Part B: Engineering, 99 (2016) 162-172.10.1016/j.compositesb.2016.06.005
- 14. Kim, S., Lee, J., Roh, C., Eun, J. and Kang, C.: Evaluation of carbon fiber and p-aramid composite for industrial helmet using simple cross-ply for protecting human heads. Mechanics of Materials, 139 (2019) 103203.10.1016/j.mechmat.2019.103203
- 15. Cerretini, G. and Giacomin, G.: Structural Reinforcement of a Masonry Building. In Key Engineering Materials 817 (2019) 673-679.10.4028/www.scientific.net/KEM.817.673
- 16. Amran, Y.M., Alyousef, R., Rashid, R.S., Alabduljabbar, H. and Hung, C.C.: Properties and applications of FRP in strengthening RC structures: A review. In Structures 16 (2018) 208-238. Elsevier.10.1016/j.istruc.2018.09.008
- 17. Szakács, J. and Mészáros, L.: Synergistic effects of carbon nanotubes on the mechanical properties of basalt and carbon fiber-reinforced polyamide 6 hybrid composites. Journal of Thermoplastic Composite Materials, 31(2018) 553-571.10.1177/0892705717713055
- 18. Chen, H., Lim, C.L.J. and Fong, L.C.: PolyOne Corp, Polyamide compounds containing pitch carbon fiber. U.S. Patent 9,243,178 (2016).
- 19. Kuciel, S., Kuźnia, P. and Jakubowska, P.: Properties of composites based on polyamide 10.10 reinforced with carbon fiber. Polimery, 61 (2016).10.14314/polimery.2016.106
- 20. Shi, Z.Y., Cui, P. and Li, X.: A review on research progress of machining technologies of carbon fiber-reinforced polymer and aramid fiber-reinforced polymer. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (2019) 4508-4520.10.1177/0954406219830732
- 21. Kutz, M.: ed. Applied plastics engineering handbook: processing and materials. William Andrew (2011).
- 22. Page, I.B.: Polyamides as engineering thermoplastic materials. Smithers Rapra Publishing, vol. 11, (2000).
- 23. Amintowlieh, Y., Sardashti, A. and Simon, L.C.: Polyamide 6–wheat straw composites: Effects of additives on physical and mechanical properties of the composite. Polymer Composites 33 (2012) 976-984.10.1002/pc.22228
- 24. Saba, N., Tahir, P.M. and Jawaid, M.: A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polymers 6 (2014) 2247-2273.10.3390/polym6082247
- 25. Kwon, Y.N. and Leckie, J.O.: Hypochlorite degradation of crosslinked polyamide membranes: II. Changes in hydrogen bonding behavior and performance. Journal of membrane science 282 (2006) 456-464.10.1016/j.memsci.2006.06.004
- 26. Chung, H.Y., Hall, J.R., Gogins, M.A., Crofoot, D.G. and Weik, T.M.: Donaldson Co Inc, Polymer, polymer microfiber, polymer nanofiber and applications including filter structures. U.S. Patent 7,090,715 (2006).
- 27. Lau, W.J., Gray, S., Matsuura, T., Emadzadeh, D., Chen, J.P. and Ismail, A.F.: A review on polyamide thin film nanocomposite (TFN) membranes: history, applications, challenges and approaches. Water research 80 (2015) 306-324.10.1016/j.watres.2015.04.037
- 28. Akkapeddi, M.K., Glans, J.H., Dege, G.J. and Chung, S.J.: Honeywell International Inc, Polyamide compositions comprising aliphatic polyamide and an aromatic polyamide oligomer having improved moisture resistance. U.S. Patent 5,541,267 (1996).
- 29. Tanner, D.A.V.I.D., Fitzgerald, J., Riewald, P.G. and Knoff, W.F.: Aramid structure/property relationships and their role in applications development. Marcel Dekker, Inc., Handbook of Fiber Science and Technology 3 (1989) pp.35-82.
- 30. Slugin, I.V., Sklyarova, G.B., Kashirin, A.I. and Tkacheva, L.V.: Rusar para-aramid fibres for composite materials for construction applications. Fibre Chemistry 38 (2006) 25-26.10.1007/s10692-006-0033-0
- 31. Singh, A.P., Garg, P., Alam, F., Singh, K., Mathur, R.B., Tandon, R.P., Chandra, A. and Dhawan, S.K.; 2012. Phenolic resin-based composite sheets filled with mixtures of reduced graphene oxide, γ-Fe2O3 and carbon fibers for excellent electromagnetic interference shielding in the X-band. Carbon 50(2012) 3868-3875.10.1016/j.carbon.2012.04.030
- 32. Frank, E., Steudle, L.M., Ingildeev, D., Spoerl, J.M. and Buchmeiser, M.R.: Carbon fibers: precursor systems, processing, structure, and properties. Angewandte Chemie International Edition 53(2014), 5262-5298.10.1002/anie.20130612924668878
- 33. Chand, S.: Review carbon fibers for composites. Journal of materials science, 35 (2000), 1303-1313.10.1023/A:1004780301489
- 34. Behabtu, N., Young, C.C., Tsentalovich, D.E., Kleinerman, O., Wang, X., Ma, A.W., Bengio, E.A., ter Waarbeek, R.F., de Jong, J.J., Hoogerwerf, R.E. and Fairchild, S.B.: Strong, light, multifunctional fibers of carbon nanotubes with ultrahigh conductivity. Science, 339 (2013), 182-186.10.1126/science.1228061
- 35. Nataraj, S.K., Yang, K.S. and Aminabhavi, T.M.: Polyacrylonitrile-based nanofibers—A state-of-theart review. Progress in polymer science 37(2012) 487-513.10.1016/j.progpolymsci.2011.07.001
- 36. Dhand V, Mittal G, Rhee KY, Park S-J, Hui D.: A short review on basalt fiber reinforced polymer composites. Composites Part B: Engineering 73 (2015) 166-180.10.1016/j.compositesb.2014.12.011
- 37. Liu, W., Mohanty, A.K., Askeland, P., Drzal, L.T., Misra, M.: Influence of fiber surface treatment on properties of Indian grass fiber reinforced soy protein based biocomposites. Polymer 45 (2004) 7589-7596.10.1016/j.polymer.2004.09.009
- 38. Xu, J., Ma, Y., Zhang, Q., Sugahara, T., Yang, Y., Hamada, H.: Crashworthiness of carbon fiber hybrid composite tubes molded by filament winding. Composite Structures. 139 (2016) 130-140.10.1016/j.compstruct.2015.11.053
- 39. Awad, Z.K., Aravinthan, T., Zhuge, Y., Gonzalez, F.: A review of optimization techniques used in the design of fibre composite structures for civil engineering applications. Materials & Design. 33 (2012) 534-544.10.1016/j.matdes.2011.04.061
- 40. Sharma M, Gao S, Mäder E, Sharma H, Wei LY, Bijwe J. Carbon fiber surfaces and composite interphases. Composites Science and Technology, 102 (2014) 35-50.10.1016/j.compscitech.2014.07.005
- 41. Yao, S.S., Jin, F.L., Rhee, K.Y., Hui, D. and Park, S.J.: Recent advances in carbon-fiber-reinforced thermoplastic composites: A review. Composites Part B: Engineering 142 (2018) 241-250.10.1016/j.compositesb.2017.12.007
- 42. An, H. J., Kim, J. S., Kim, K.-Y., Lim, D. Y. and Kim, D. H.: Mechanical and thermal properties of long carbon fiber-reinforced polyamide 6 composites. Fibers and Polymers 15 (2014) 2355-2359.10.1007/s12221-014-2355-5
- 43. Li, J. and Zhang, Y.F.: The tensile properties of short carbon fiber reinforced ABS and ABS/PA6 composites. Journal of Reinforced Plastics and Composites, 29 (2020) 1727-1733.10.1177/0731684409337551
- 44. Luo, H., Xiong, G., Ma, C., Li, D. and Wan, Y.: Preparation and performance of long carbon fiber reinforced polyamide 6 composites injection-molded from core/shell structured pellets. Materials & Design, 64 (2014) 294-300.10.1016/j.matdes.2014.07.054
- 45. Yi, J.W., Lee, W., Seong, D.G., Won, H.J., Kim, S.W., Um, M.K. and Byun, J.H.: Effect of phenoxy-based coating resin for reinforcing pitch carbon fibers on the interlaminar shear strength of PA6 composites. Composites Part A: Applied Science and Manufacturing, 87 (2016) 212-219.10.1016/j.compositesa.2016.04.028
- 46. Wu, S.H., Wang, F.Y., Ma, C.C.M., Chang, W.C., Kuo, C.T., Kuan, H.C. and Chen, W.J.: 2001. Mechanical, thermal and morphological properties of glass fiber and carbon fiber reinforced polyamide-6 and polyamide-6/clay nanocomposites. Materials Letters, 49 (2001) 327-333.10.1016/S0167-577X(00)00394-3
- 47. Li, J.: Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites. Applied Surface Science, 255 (2008) 2822-2824.10.1016/j.apsusc.2008.08.013
- 48. Karsli, N.G. and Aytac, A.: Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites. Composites Part B: Engineering, 51 (2013) 270-275.10.1016/j.compositesb.2013.03.023
- 49. Li J, Zhang YF.: The tensile properties of HNO3-treated carbon fiber reinforced ABS/PA6 composites. Surface and Interface Analysis 41(2009) 610-614.10.1002/sia.3072
- 50. Ma, Y., Ueda, M., Yokozeki, T., Sugahara, T., Yang, Y. and Hamada, H.: A comparative study of the mechanical properties and failure behavior of carbon fiber/epoxy and carbon fiber/polyamide 6 unidirectional composites. Composite Structures, 160 (2017) 89-99.10.1016/j.compstruct.2016.10.037
- 51. Costa, A.P.D., Botelho, E.C., Costa, M.L., Narita, N.E. and Tarpani, J.R.: A review of welding technologies for thermoplastic composites in aerospace applications. Journal of Aerospace Technology and Management, 4 (2012) 255-265.10.5028/jatm.2012.040303912
- 52. Botelho, E.C., Scherbakoff, N. and Rezende, M.C.: Study of polyamide 6/6 synthesis carried out by interfacial polymerization on carbon fibre. Polymer international, 51 (2002) 1261-1267.10.1002/pi.1064
- 53. Botelho, E.C., Scherbakoff, N., Rezende, M.C., Kawamoto, A.M. and Sciamareli, J.: Synthesis of polyamide 6/6 by interfacial polycondensation with the simultaneous impregnation of carbon fibers. Macromolecules, 34 (2001) 3367-3375.10.1021/ma000902k
- 54. Karsli, N.G., Ozkan, C., Aytac, A. and Deniz, V.: Effects of sizing materials on the properties of carbon fiberreinforced polyamide 6, 6 composites. Polymer Composites, 34 (2013) 1583-1590.10.1002/pc.22556
- 55. Beylergil, B., Tanoğlu, M. and Aktaş, E.: Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide6, 6 electrospun nanofibers. Journal of Applied Polymer Science, 134 (2017) 45244.10.1002/app.45244
- 56. Jin, X., Sun, J., Zhang, J.S., Gu, X., Bourbigot, S., Li, H., Tang, W. and Zhang, S.: Preparation of a novel intumescent flame retardant based on supramolecular interactions and its application in polyamide 11. ACS applied materials & interfaces, 9 (2017) 24964-24975.10.1021/acsami.7b06250
- 57. Bai, J., Yuan, S., Shen, F., Zhang, B., Chua, C.K., Zhou, K. and Wei, J.: Toughening of polyamide 11 with carbon nanotubes for additive manufacturing. Virtual and Physical Prototyping, 12 (2017) 235-240.10.1080/17452759.2017.1315146
- 58. Zierdt, P., Theumer, T., Kulkarni, G., Däumlich, V., Klehm, J., Hirsch, U. and Weber, A.: Sustainable wood-plastic composites from bio-based polyamide 11 and chemically modified beech fibers. Sustainable Materials and Technologies, 6 (2015) 6-14.10.1016/j.susmat.2015.10.001
- 59. Lao, S.C., Yong, W., Nguyen, K., Moon, T.J., Koo, J.H., Pilato, L. and Wissler, G.: Flame-retardant polyamide 11 and 12 nanocomposites: processing, morphology, and mechanical properties. Journal of composite materials, 44 (2010) 2933-2951.10.1177/0021998310369580
- 60. Zhang, Q., Jin, H., Wang, X. and Jing, X.: Morphology of conductive blend fibers of polyaniline and polyamide-11. Synthetic Metals, 123 (2001) 481-485.10.1016/S0379-6779(01)00354-X
- 61. Sandler, J.K.W., Pegel, S., Cadek, M., Gojny, F., Van Es, M., Lohmar, J., Blau, W.J., Schulte, K., Windle, A.H. and Shaffer, M.S.P.: A comparative study of melt spun polyamide-12 fibres reinforced with carbon nanotubes and nanofibres. Polymer, 45 (2004) 2001-2015.10.1016/j.polymer.2004.01.023
- 62. Perrot, C., Piccione, P.M., Zakri, C., Gaillard, P. and Poulin, P.: Influence of the spinning conditions on the structure and properties of polyamide 12/carbon nanotube composite fibers. Journal of Applied Polymer Science, 114 (2009) 3515-3523.10.1002/app.30875
- 63. Wiedmer, S. and Manolesos, M.: An experimental study of the pultrusion of carbon fiber-polyamide 12 yarn. Journal of thermoplastic composite materials, 19 (2006) 97-112.10.1177/0892705706055448
- 64. Erden, S., Ho, K.K., Lamoriniere, S., Lee, A.F., Yildiz, H. and Bismarck, A.: Continuous atmospheric plasma oxidation of carbon fibres: influence on the fibre surface and bulk properties and adhesion to polyamide 12. Plasma Chemistry and Plasma Processing, 30 (2010) 471-487.10.1007/s11090-010-9227-6
- 65. Kurokawa, M., Uchiyama, Y., Iwai, T. and Nagai, S.: Performance of plastic gear made of carbon fiber reinforced polyamide 12. Wear, 254 (2003) 468-473.10.1016/S0043-1648(03)00020-6
- 66. Wang, J., Gu, M., Zhu, Z., Ge, S. and Liu, W.: Tribological properties of hybrid carbon fiber and MoS 2 reinforced polyamide 1010 composites. Fuhe Cailiao Xuebao (Acta Materiae Compositae Sinica, China), 20 (2003) 13-18.
- 67. Wang, J.X., Ge, S.R. and Li, L.: Effect of counterpart surface roughness on the tribological behavior of carbon fiber reinforced polyamide 1010 composites. Mocaxue Xuebao (Tribology, China), 21 (2001) 106-109.
- 68. WANG, J.X. and GU, M.Y.: Tribological Behaviors and Wear Mechanism of Carbon Fiber Reinforced Nylon 1010 Composites. Materials For Mechanical Engineering, 7 (2003).
- 69. Nikiforov, A.A., Vol’fson, S.I., Okhotina, N.A., Rinberg, R., Hartmann, T. and Kroll, L.: Mechanical properties of the compositions based on biopolyamide-1010 modified by carbon, glass, and cellulose chopped fibers. Russian Metallurgy (Metally), 4 (2017) 279-282.10.1134/S0036029517040152
- 70. Ge, S., Zhang, D., Zhu, H. and Wang, J.: Mechanical properties and their influence on the friction and wear of the carbon fibers reinforced polyamide 1010. Fuhe Cailiao Xuebao(Acta Mater. Compos. Sin., China), 21(2004) 99-104.
- 71. Nikiforov, A.A., Okhotina, N.A., Fayzullin, I.Z., Volfson, S.I., Rinberg, R. and Kroll, L., 2016, November. Stress-strain properties of composites based on bio-based polyamide 1010 filled with cut fibers. In AIP Conference Proceedings, AIP Publishing, vol. 1785 (2016) 030018.10.1063/1.4967039
- 72. Sun, Z., Hu, X., Sun, S. and Chen, H.: Energy-absorption enhancement in carbon-fiber aluminum-foam sandwich structures from short aramid-fiber interfacial reinforcement. Composites Science and Technology, 77 (2013) 14-21.10.1016/j.compscitech.2013.01.016
- 73. Feldman, A.Y., Gonzalez, M.F., Wachtel, E., Moret, M.P. and Marom, G.: Transcrystallinity in aramid and carbon fiber reinforced nylon 66: determining the lamellar orientation by synchrotron X-ray micro diffraction. Polymer, 45 (2004) 7239-7245.10.1016/j.polymer.2004.08.027
- 74. Won, M.S. and Dharan, C.K.H.: Drilling of aramid and carbon fiber polymer composites. Journal of Manufacturing Science and Engineering, 124 (2002) 778-783.10.1115/1.1505854
- 75. Ma, Y., Sugahara, T., Yang, Y. and Hamada, H.: A study on the energy absorption properties of carbon/aramid fiber filament winding composite tube. Composite Structures, 123 (2015) 301-311.10.1016/j.compstruct.2014.12.067
- 76. Kozlov, G.V., Burya, A.I., Dolbin, I.V. and Zaikov, G.E.: Fractal model of the heat conductivity for carbon fiber-reinforced aromatic polyamide. Journal of applied polymer science, 100 (2006) 3828-3831.10.1002/app.23821
- 77. Duchoslav, J., Unterweger, C., Steinberger, R., Fürst, C. and Stifter, D.: Investigation on the thermooxidative stability of carbon fiber sizings for application in thermoplastic composites. Polymer Degradation and Stability, 125 (2016) 33-42.10.1016/j.polymdegradstab.2015.12.016
- 78. Hofstätter, T., Pedersen, D.B., Tosello, G. and Hansen, H.N.: State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies. Journal of Reinforced Plastics and Composites, 36 (2017) 1061-1073.10.1177/0731684417695648
- 79. TrigoLópez, M., BarrioManso, J.L., Serna, F., García, F.C. and García, J.M.: Crosslinked Aromatic Polyamides: A Further Step in HighPerformance Materials. Macromolecular Chemistry and Physics, 214 (2013) 2223-2231.10.1002/macp.201300342
- 80. Trigo-López, M., Estévez, P., San-José, N., Gómez-Valdemoro, A., García, F.C., Serna, F., Pena, J.L. and García, J.M.: Recent patents on aromatic polyamides. Recent Patents on Materials Science, 2 (2009) 190-208.10.2174/1874464810902030190
- 81. Dike, A.S.: Improvement of mechanical and physical properties of carbon fiber-reinforced polyamide composites by applying different surface coatings for short carbon fiber. Journal of Thermoplastic Composite Materials, (2009) 0892705719877218.