References
- 1. Jasiński A.: Extented operational time of domestic power units - chances and threats [in Polish], Energetyka, 3 (2013), 551-556.
- 2. Dobrzański J.: Materials science interpretation of the life of steels for power plants [in Polish], Open Access Library, 3, 2011.
- 3. Dziuba - Kałuża M., Dobrzański J., Zieliński A.: Mechanical properties of Cr-Mo and Cr-Mo-V low-alloy steel welded joints after long-term service under creep conditions, Arch. Mater. Sc. Eng., 63 (2013), 5-12.
- 4. Dobrzański J., Krztoń H., Zieliński A.: Development of the precipitation processes in low-alloy Cr-Mo type steel for evolution of the material state after exceeding the assessed lifetime, J. Achiev. Mater. Manufac. Eng., 2, 23, (2007), 19-22.
- 5. PN-75/H-84024 Steels for elevated temperatures service. Grades.
- 6. PN-EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size.
- 7. Khan S. A., Islam M. A.: Influence of prior austenite grain size on the degree of temper embrittlement in Cr-Mo steel, J. Mater. Eng. Perform., 16, (2007), 80-85.
- 8. Nguyen T. D., Sawada K., Kushima H., Tabuchi M., Kimura K.: Change of precipitation free zone during long - term creep in 2.25Cr-1Mo steel, Mater. Sc. Eng. A, 591A (2014), 130-135.
- 9. Golański G., Pietryka I., Słania J., Jasak J., Urbańczyk P., Microstructure and mechanical properties of welded joint of 12HMF steel after long - term service [in Polish], Welding Technology Review [Przegląd Spawalnictwa], 5, 2014, 49-53.
- 10. Joarder A., Sarma D. S., Cheruvu N. S.: Effect of long - term service exposure on microstructure and mechanical properties of a CrMoV steam turbine rotor steel, Metall. Trans., 22A (1991), 1811-1820.
- 11. Pigrova P. G.: Carbide diagrams and precipitation of alloying elements during aging of low-alloy steels, Metall. Mater. Trans. A, 27 (1996), 498-502.
- 12. Janovec J., Svoboda M., Vyrostkova A., Kroupa A.: Time-temperature-precipitation diagrams of carbide evolution in low alloy steels, Mater. Sc. Eng., 402A (2005), 288-293.
- 13. Stevens R. A., Flewitt P. E. J.: The effect of phosphorus on the microstructure and creep properties of 2¼%Cr1%Mo steel, Acta Metall., 5 (1986), 849-866.
- 14. Dobrzański J., Hernas A.: Correlation between phase composition and life-time of 1Cr-0.5Mo steels during long-term service at elevated temperatures, J. Mater. Proces. Technol., 53 (1995), 101-108.
- 15. Afrouz A., Collins M. J., Pilikngton R.: Microstructural examination of 1Cr-0.5Mo steel during creep Met. Technol., 12 (1983), 461-463.
- 16. Stachura S., Stradomski Z., Golański G.: Phosphorus in ferroalloys [in Polish], Hutnik - Wiadomości Hutnicze, 5 (2001), 184-193.
- 17. Janovec J.: Nature of alloy steel intergranular embrittlement, Veda Publ., Bratislava, 1999.
- 18. Islam M. A., Novovic M., Bowen P., Knott J.F.: Effect of phosphorus segregation on fracture properties of 2.25Cr-1Mo pressure vessel steel, J. Mater. Eng. Perform., 12, 3 (2003), 244-248.
- 19. Suzuki S., Obata M., Abiko K., Kimura H.: Effect of carbon on the grain boundary segregation of phosphorus in α - iron, Sc. Metall. 17 (1983), 1325-1328.