References
- 1. Kathuria Y.P., A preliminary study on laser assisted aluminum foaming, Journal of Materials Science 38 (2003) 2875 - 2881.
- 2. Kathuria Y.P., Nd-YAG laser assisted aluminum foaming, Journal of Materials Processing Technology Volume 142, Issue 2, 25 November 2003, Pages 466-470.
- 3. Malekjafarian M., Sadrnezhaad S.K., Closed-cell Al alloy composite foams: Production and characterization, Materials and Design 42 (2012) 8-12.
- 4. PN-EN ISO 9013:2008 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (in polish: PN-EN ISO 9013:2008 Cięcie termiczne - Klasyfikacja cięcia termicznego - Specyfikacja geometrii wyrobu i tolerancje jakości.)
- 5. Ashby M.F., Evans A.G., Fleck N.A., Gibson L.J., Hutchinson J.W., Wadley H.N.G., Metal Foams: A Design Guide, Butterworth-Heinemann 2000.
- 6. Yilbas B.S., Akhtar S.S., Keles O., Laser Cutting of triangular geometries in aluminum foam: Effect of cut size on thermal stress levels, Optics & Laser Technology Volume 48 (2013), 523-529.
- 7. Yilbas B.S., Akhtar S.S., Keles O., Laser hole cutting in aluminum foam: Influence of hole diameter on thermal stress, Optics and Lasers in Engineering Volume 51, Issue 1, January 2013, 23-29.
- 8. De Jaeger P., T’Joen C., Huisseune H., Ameel B., De Schampheleire S., De Paepe M., Assessing the influence of four cutting methods on the thermal contact resistance of open-cell aluminum foam, International Journal of Heat and Mass Transfer 55 (2012) 6142-6151.
- 9. Abolghasemi Fakhri M. Bordatchev E. V., Tutunea-Fatan O. R., An image-based methodology to establish correlations between porosity and cutting force in micromilling of porous titanium foams, Int J Adv Manuf Technol (2012) 60:841-851.
- 10. Rajput V., Mondal D. P., Das S., Ramakrishnan N., Jha A. K., Effect of SiCp addition on agehardening of aluminium composite and closed cell aluminium composite foam, Journal of Materials Science 2007, Volume 42, Issue 17, 7408-7414.
- 11. Duflou J.R., Kruth J-P., Bohez E.L., Contour cutting of pre-formed parts with abrasive waterjet using 3-axis nozzle control, Journal of Materials Processing Technology Volume 115, Issue 1, 22 August 2001, 38-43.
- 12. Eltawahni H.A., Hagino M., Benyounis K.Y., Inoue T, Olabi A.G., Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L, Optics & Laser Technology 44 (2012) 1068-1082.
- 13. Furong Cao, Zhuoliang Li, Nianxian Zhang, Hua Ding, Fuxiao Yu, Liang Zuo Superplasticity, flow and fracture mechanisminan Al-12.7Si-0.7 Mg alloy, Materials Science&EngineeringA571(2013)167-183.
- 14. Stakhniv N.E., L. N. Devin, and A. G. Sulima, A Study of Cutting Force Variations in Turning Silumins Using Round Polycrystalline Diamond Inserts, ISSN 10634576, Journal of Superhard Materials, 2010, Vol. 32, No. 5, 356-364.