References
- [1] H. Xie, M. Song, X. Liu, B. Yang, and C. Gu, “Research on the simplified design of a centrifugal compressor impeller based on meridional plane modification,” Applied Sciences, vol. 8, no. 8, pp. 1‒16, Aug. 2018, Art no. 1339. https://doi.org/10.3390/app8081339
- [2] S. Mishra, S. Abdallah, and M. Turner, “Flow characteristics of a novel centrifugal compressor design,” in Proceedings of ASME Turbo Expo 2016, GT2016, Vol. 2D: Turbomachinery, Seoul, South Korea, June 2016, pp. 1–12. https://doi.org/10.1115/GT2016-58103
- [3] J.-H. Kim, J.-H. Choi, and K.-Y. Kim, “Surrogate modeling for optimization of a centrifugal compressor impeller,” International Journal of Fluid Machinery and Systems, vol. 3, no. 1, pp. 29–38, 2010. https://doi.org/10.5293/IJFMS.2010.3.1.029
- [4] J. Chen, G. Xiao, M. L. Ferrari, T. Yang, M. Ni, and K. Cen, “Dynamic simulation of a solar-hybrid microturbine system with experimental validation of main parts,” Journal Pre-proof Renewable Energy, vol. 154, pp. 187–200, Jul. 2019. https://doi.org/10.1016/j.renene.2019.11.022
- [5] M. Mojaddam and K. R. Pullen, “Optimization of a centrifugal compressor using the design of experiment technique,” Applied Sciences, vol. 9, no. 2, 2019, Art no. 291. https://doi.org/10.3390/app9020291
- [6] S. K. Cho, S. J. Bae, Y. Jeong, J. Lee, and J. I. Lee, “Direction for high-performance supercritical CO2 centrifugal compressor design for dry cooled supercritical CO2 Brayton cycle,” Applied Sciences, vol. 9, no. 19, 2019, Art no. 4057. https://doi.org/10.3390/app9194057
- [7] J. M. Sorokes and M. J. Kuzdzal, “Centifugal compressor evolution,” in Proceedings of the 47th Turbomachinery & 34th Pump Symposia, George R. Brown Convention Centre, USA, Sep. 2018, pp. 1–23. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://oaktrust.library.tamu.edu/bitstream/handle/1969.1/175017/05_Sorokes.pdf?sequence=1&isAllowed=y
- [8] S. Pakle and K. Jiang, “Design of a high-performance centrifugal compressor with new surge margin improvement technique for high speed turbomachinery,” Propulsion and Power Research, vol. 7, no. 1, pp. 19–29, Mar. 2019. https://doi.org/10.1016/j.jppr.2018.02.004
- [9] Y. Bousquet, N. Binder, G. Dufour, X. Carbonneau, M. Roumeas, and I. Trebinjac, “Numerical simulation of stall inception mechanisms in a centrifugal compressor with vaned diffuser,” J. Turbomach., vol. 138, no. 12. 2016, Art no. 121005. https://doi.org/10.1115/1.4033704
- [10] A. A. Drozdov, V. I. Yaroshenko, and Y. N. Pisarev, “The geometric model of the multistage centrifugal compressor flow path in the ANSYS CFX,” in AIP Conference Proceedings, vol. 2141, no. 1, Aug. 2019, Art no. 030017. https://doi.org/10.1063/1.5122067
- [11] A. A. Drozdov, Y. B. Galerkin, O. A. Solovyeva, K. V. Soldatova, and A. A. Ucehovscy, “Development and identification of a mathematical model of centrifugal compressor stages using the universal modeling method,” in AIP Conference Proceedings, vol. 2285, no. 1, Nov. 2020, Art no. 030057. https://doi.org/10.1063/5.0026727
- [12] M. Heinrich and R. Schwarze, “Genetic algorithm optimization of the volute shape of a centrifugal compressor,” International Journal of Rotating Machinery, 2016, Art no. 4849025. https://doi.org/10.1155/2016/4849025
- [13] Y. Wan, J. Guan, and S. Xu, “Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application,” International Journal of Hydrogen Energy, vol. 42, no. 8, pp. 5590–5605, Feb. 2017. https://doi.org/10.1016/j.ijhydene.2016.08.162
- [14] A. Meroni, B. Zühlsdorf, B. Elmegaard, and F. Haglind, “Design of centrifugal compressors for heat pump systems,” Applied Energy, vol. 232, pp. 139–156, 2018. https://doi.org/10.1016/j.apenergy.2018.09.210
- [15] E. I. Gltierrez Velasquez, “Determination of a suitable set of loss models for centrifugal compressor performance prediction,” Chinese Journal of Aeronautics, vol. 30, no. 5, pp. 1644–1650, Oct. 2017. https://doi.org/10.1016/j.cja.2017.08.002
- [16] H. Kang and Y. Kim, “Optimal design of impeller for centrifugal compressor under the influence of one-way fluid-structure interaction,” Journal of Mechanical Science and Technology, vol. 30. pp. 3953–3959, Sep. 2016. https://doi.org/10.1007/s12206-016-0807-0
- [17] A. Iranzo, “CFD applications in energy engineering research and simulation: an introduction to published reviews,” vol.7, no. 12, Nov. 2019, Art no. 883. https://doi.org/10.3390/pr7120883
- [18] Y. Kondratenko, V. Korobko, O. Korobko, and O. Gerasin, “Pulse-phase control system for temperature stabilization of thermoacoustic engine model driven by the waste heat energy,” in Proceedings of the 2015 IEEE 8th International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), vol. 1, Poland, Sep. 2016, pp. 58–61. https://doi.org/10.1109/IDAACS.2015.7340701
- [19] M. Taranov, J. Rudolph, C. Wolf, Y. Kondratenko, and O. Gerasin, “Advanced approaches to reduce number of actors in a magnetically-operated wheel-mover of a mobile robot,” in Proceedings of the 2017 13th International Conference Perspective Technologies and Methods in MEMS Design (MEMSTECH), Lviv, Ukraine, Apr. 2017. pp. 96–100. https://doi.org/10.1109/MEMSTECH.2017.7937542
- [20] O. Gerasin, Y. Zaporozhets, and Y. Kondratenko, “Models of magnetic driver interaction with ferromagnetic surface and geometric data computing for clamping force localization patches,” in Proceedings of the IEEE Second International Conference on Data Stream Mining & Processing, Lviv, Ukraine, Aug. 2018, pp. 44–49. https://doi.org/10.1109/DSMP.2018.8478623
- [21] Y. Kondratenko, Y. Zaporozhets, J. Rudolph, O. Gerasin, A. Topalov, and O. Kozlov, “Features of clamping electromagnets using in wheel mobile robots and modeling of their interaction with ferromagnetic plate,” in Proceedings of the 2017 IEEE 9th International Conference Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Bucharest, Romania, Sep. 2018, pp. 453–458. https://doi.org/10.1109/IDAACS.2017.8095122
- [22] Y. Kondratenko, Y. Zaporozhets, J. Rudolph, O. Gerasin, A. Topalov, O. Kozlov, and Y. Kondratenko, “Modeling of clamping magnets interaction with ferromagnetic surface for wheel mobile robots,” International Journal of Computing, vol. 17, no. 1, pp. 33–46, 2018. https://doi.org/10.47839/ijc.17.1.947
- [23] Y. Kondratenko, A. Topalov, and O. Gerasin, “Analysis and modeling of the slip signals’ registration processes based on sensors with multicomponent sensing elements,” in Proceedings of the 13th Int. conf. CADSM 2015, Lviv, Ukraine, Feb. 2015, pp. 109–112. https://doi.org/10.1109/CADSM.2015.7230810
- [24] Y. Kondratenko, O. Korobko, O. Kozlov, O. Gerasin, and A. Topalov, “PLC based system for remote liquids level control with radar sensor,” in Proceedings of the 2015 IEEE 8th International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Warsaw, Poland, Sep. 2015, pp. 47–52. https://doi.org/10.1109/IDAACS.2015.7340699
- [25] O. S. Gerasin, O. V. Kozlov, G. V. Kondratenko, J. Rudolph, and Y. P. Kondratenko, “Neural controller for mobile multipurpose caterpillar robot,” in Proceedings of the 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), vol. 1, Metz, France, Sep. 2019, pp. 222–227. https://doi.org/10.1109/IDAACS.2019.8924321
- [26] Y. P. Kondratenko, O. V. Kozlov, O. S. Gerasin, and Y. M. Zaporozhets, “Synthesis and research of neuro-fuzzy observer of clamping force for mobile robot automatic control system,” in Proceedings of the 2016 IEEE First International Conference on Data Stream Mining & Processing (DSMP), Lviv, Ukraine, Aug. 2016, pp. 90–95. https://doi.org/10.1109/DSMP.2016.7583514
- [27] Y. P. Kondratenko, J. Rudolph, O. V. Kozlov, Y. M. Zaporozhets, and O. S. Gerasin, “Neuro-fuzzy observers of clamping force for magnetically operated movers of mobile robots,” Technical Electrodynamics, vol. 5, pp. 53–61, 2017 (in Ukrainian).
- [28] Y. Kondratenko, O. Kozlov, and O. Gerasin, “Neuroevolutionary approach to control of complex multicoordinate interrelated plants,” International Journal of Computing, vol. 18, no. 4, pp. 502–514, Dec. 2019. https://doi.org/10.47839/ijc.18.4.1620
- [29] Y. P. Kondratenko and O. V. Kozlov, “Generation of rule bases of fuzzy systems based on modified ant colony algorithms,” Journal of Automation and Information Sciences, vol. 51, no. 3, pp. 4–25, 2019. https://doi.org/10.1615/JAutomatInfScien.v51.i3.20
- [30] K. Ekradi, and A. Madadi, “Performance improvement of a transonic centrifugal compressor impeller with splitter blade by three-dimensional optimization,” Energy, vol. 201, Jun. 2020, Art no. 117582. https://doi.org/10.1016/j.energy.2020.117582
- [31] S. V. Falaleev, and M. Klusachek, Designing the Degree of a Centrifugal Compressor Using Parametric Modeling. Samara: SSAU, 2010.
- [32] O. V. Baturyn, G. I. Kolmakova, V. M. Matveev, and G. M. Popova, Design of a Centrifugal Compressor Using IOSO Optimization Technology. Samara, SSAU, 2013.
- [33] M. Schnoes, C. Voß, and E. Nicke, “Design optimization of a multi-stage axial compressor using throughflow and a database of optimal airfoils,” Journal of the Global Power and Propulsion Society, vol. 2, pp. 516–528, 2018. https://doi.org/10.22261/JGPPS.W5N91I
- [34] O. V. Komarov; T. A. Nedoshivina, and B. S. Revzin, Aircraft and Shipboard Converted Gas Turbine Engines for Ground Application. Ural University Publishing House: Yekaterinburg, Russian Federation, 2019 (in Russian).
- [35] H. Bonilla-Alvarado, K. M. Bryden, L. Shadle, D. Tucker, and P. Pezzini, “Development of real-time system identification to detect abnormal operations in a gas turbine cycle,” J. Energy Resour. Technol., vol. 142, no. 7, 2020, Art no. 070903. https://doi.org/10.1115/1.4046144
- [36] V. M. Cherkasskiy, Pumps, Fans, Compressors, 2nd ed. Energoatomizdat: Moscow, USSR, 1984 (in Russian).
- [37] B. R. Hunt, R. L. Lipsman, and J. M. Rosenberg, Guide to MATLAB for Beginners and Experienced Users, 3rd ed. Cambridge University Press, 2014. https://doi.org/10.1017/CBO9781107338388
- [38] Y. P. Kondratenko, O. V. Kozlov, O. S. Gerasin, A. M. Topalov, and O. V. Korobko, “Automation of control processes in specialized pyrolysis complexes based on Web SCADA systems,” in Proceedings of the 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Bucharest, Romania, Sep. 2017, pp. 107–112. https://doi.org/10.1109/IDAACS.2017.8095059
- [39] Y. P. Kondratenko, O. V. Kozlov, A. M. Topalov, O. V. Korobko, and O.S. Gerasin, “Automation of control processes in specialized pyrolysis complexes based on industrial Internet of Things,” in Dependable IoT for Human and Industry. Modeling, Architecting, Implementation. Series in Information Science and Technology, pp. 367–387, 2018.10.1109/IDAACS.2017.8095059
- [40] I. G. Hisameev, V. A. Maksimov, G. S. Batkis, and Ya. Z. Guzelbaev, Design and Operation of Industrial Centrifugal Compressors. Publishing house “FEN”: Kazan, 2010 (in Russian).
- [41] V. M. Simon, “Improving the performance of single- and multi-stage centrifugal compressors by coordinated regulation of the inlet blower and vane diffuser,” Power Machines, pp. 85–93, 1988 (in Russian).
- [42] N. N. Buharin, “About combined control of refrigeration centrifugal compressors,” in Improving the Efficiency of Refrigeration Machines: Collection of Scientific Papers, Lensovet LTN: Leningrad, pp. 79–88, 1982 (in Russian).