References
- [1] A.O. Olorunnisola, “Production of fuel briquettes from wastepaper and coconut husk admixture, agricultural engineering international”, The CIGR E journal, Vol. 6, No. 6, Pp. 60-71, 2007.
- [2] A.O. Kuti, “Impact of charred palm kernel shell on the calorific value of composite sawdust briquette”, Journal of Engineering and Applied Sciences, Vol. 2, Pp. 62-65, 2007.
- [3] C.K.W. Ndiema, P.N. Manga, C.R. Ruttoh, “Influence of die pressure on relaxation characteristics of briquetted biomass”, Energy Conversion and Management, Vol. 43, Pp. 2157-2161, 2002.10.1016/S0196-8904(01)00165-0
- [4] P.C.W. Kwong, J.H. Wang, and C.W. Chao, “Effect of co-combustion of coal and rice husk on the combustion performance and pollutant emission”, Atmospheric Environment Journal, Vol. 17, No. 4, Pp. 7462-7468, 2007.10.1016/j.atmosenv.2007.05.040
- [5] O. Somchai, B. Kunchana, and T. Duangporn, “In-situ Desulfurization of Coal Briquettes by Lime”, Department of Chemical Technology, Chulalondkorn University, Bangkok, pp. 5-10, 1998.
- [6] H. Stefan, and F. Hans, “Emission of biomass combustion plants”, Available from www.bayan.de/ifu/Luft/emicontrol3.htm-6k, Accessed 10 September, 2019.
- [7] N.A. Musa, “Fuel characteristics of some selected biomass briquettes”, International Journal of Science and Technological Research, Vol. 3, No. 6, Pp. 193-201, 2006
- [8] D.O. Hall, and J.I. Scrase, “Will Biomass be the environmentally friendly fuel of the future”, Biomass and Bioenergy, Vol. 15, Pp. 357-367, 1998.10.1016/S0961-9534(98)00030-0
- [9] A. Katimbo, N. Kiggundu, S. Kizito, H.B. Kivumbi, and P. Tumutegyereize, “Potential of densification of mango waste and effect of binders on produced briquettes”, Agric. Eng. Int:CIGR Journal, Vol. 16, No. 4, Pp. 146-155, 2014.
- [10] H. Kim, S. Kazuhiko, S. Masayoshi, “Biomass briquette as a technology for desulphurizing and energy saving”, Renewable Energy Journal, Vol. 8, Pp. 33-75, 2001.
- [11] I.I. Ikelle, and C. Anyigor, “Comparative thermal analysis of the properties of coal and corn cob briquettes”, IOSR Journal of Applied Chemistry, 2014; 7(6): 93-97, 2014.10.9790/5736-07619397
- [12] American Society for Testing and Materials (ASTM) Annual Book of ASTM Standards, Petroleum Products, Lubricants and Fossil Fuels, New York, Section 5, Vol. 50, No. 12, pp. 210-218, 1992.
- [13] American Society for Testing and Materials (ASTM). Annual Book of ASTM Standards, Standard Test Method of Compressive Strength of Wood, West Conshohocken, Pp. 2166–2185, 2008.
- [14] S.V. Loo, and J. Koppejan, “The handbook of biomass combustion and co-firing”, Earthscan Publishers: Calcutta, Pp. 67-70, 2008.
- [15] I.I. Ikelle, F.S. Nworie, A.O. Ogah, and N.O. Ilochi, “Study on the combustion properties of bio-coal briquette blends of cassava stalk”, ChemSearch Journal, Vol. 8, No. 2, Pp. 29–34, 2017.
- [16] O.N.A. Ajueyitsi, and C.O. Adegoke, “Optimum proportion of starch binder and paper waste additive in the formulation of coal briquettes for domestic cooking”, Nigerian Journal of Mechanical Engineering, Vol. 6, No. 2, Pp. 67-71, 2003.
- [17] J. Ogbuagu, T. Onuegbu, I.I. Ikelle, E.U. Obini, and C. Anyigor, “The thermal characterization of onyeama coal and rice husk briquettes produced using bitumen as binder”, Journal of Physical Sciences and Environmental Safety, Vol. 3, No. 1, Pp. 38-45, 2013.
- [18] G. Borowski, “The possibility of utilizing coal briquettes with a biomass”, Environment Protection Engineering, Wroclaw University of Technology, Vol. 33, No. 2, Pp. 79–86, 2007.
- [19] J.T. Oladeji, and C.C. Enweremadu, “The Effects of some Processing. Parameters on Physical and Densification Characteristics of Corn Cob Briquettes”, International Journal of Energy Engineering, Vol. 2, No. 1,22-27, 2012.10.5923/j.ijee.20120201.04