Effective Methods to Strengthen the Bending Reinforced Concrete Elements

Gomon, Svyatoslav; Romanyuk, Volodymyr; Ziatіuk, Yuriy; Marchuk, Vitaliy; Nalepa, Oleksandr

doi:10.22630/aspa.2022.21.1.6

Abstract

The analysis of methods of strengthening reinforced concrete structures showed, that strengthen structures that work for bending can be both a way of increasing the cross-section, and a way to change the calculation scheme of the work of structure. To date, the effect of low-cycle loads of high levels on the work of strengthened bending reinforced concrete elements is not fully investigated. Research in this area is relevant and necessary for modern construction. The use of modern carbon-plastic materials and steel-fiber reinforced concrete is an effective way to strengthen bending reinforced concrete elements.

References

Barashikov, A. & Zadorozhnikova, I. (2005). Sproscheni rozrahunki nesuchoyi zdatnosti normalnih pereriziv zginalnih zalizobetonnih elementiv za deformatsiynoyu modellyu [Simplified calculations of bearing capacity of normal sections of bending reinforced concrete elements according to the deformation model]. Resursoekonomni materialy, konstruktsiyi, budivli ta sporudy, 12, 109–115.
Search in Google Scholar Back to article
Ben Mekki, O. & Siegert, D. (2012). 10m–Spancomposite10 m – Span composite ultra-high perfomance fiber-reinforced concrete-carbon fibres-timber bridge concept: Feasibility validation and vibration monitoring. Mechanics of Advanced Materials and Structures, 2 (10), 850–863.
Search in Google Scholar Back to article
Borisyuk, O. P. (2012).Rozrahunoknesuchoyizdatnosti Rozrahunok nesuchoyi zdatnosti normalnih pereriziv zalizobetonnih zginalnih elementiv, armovanih zovnishnoyu kompozitnoyu armaturoyu, dlya diyi malih tsiklovih navantazhen[Calculationof [Calculation of bearing capacity of normal cross sections of reinforced concrete bending elements reinforced by external composite reinforcement for the action of low cycle loads]. Construction. Materials Science, 65, 82–88.
Search in Google Scholar Back to article
Boyarchuk, B. A. (2003). Mitsnist, trischinostiykist i deformovanist zalizobetonnih konstruktsiy riznimi sposobami armuvannya roztyagnutoyi zoni [Strength, crack resistance and deformability of reinforced concrete structures with different methods of reinforcement of the stretched zone] (dissertation). Lutskyy natsionalnyy tekhnichnyy universytet – LNTU, Lutsk.
Search in Google Scholar Back to article
Dovbenko, V. S. (2015). Napruzheno-deformovaniy stan zalizobetonnih zginalnih elementiv, armovanih polimernoyu kompozitsieyu [Stress-deformed state of reinforced concrete bending elements reinforced by a polymer composition] (dissertation). Natsionalnyy universytet vodnoho hospodarstva ta pryrodokorystuvannya – NUVHP, Rivne.
Search in Google Scholar Back to article
International Federation for Structural Concrete [fib] (2001). Externally bonded FRP reinforcement for RC structures. fib Bulletin, 14.
Search in Google Scholar Back to article
Kisilier, M. I. (1977). Gibkie zhelezobetonnyie elementyi s prikleennyim naruzhnyim stalnyim listom, rastyanutyie posadkoy pod deystviem staticheskih nagruzok [Flexible reinforced concrete elements with glued external steel sheet stretched by fitting under the action of static loads] (dissertation). NIIAB, Moskva.
Search in Google Scholar Back to article
Klimpush, M. D. & Kvasha, V. G. (2007). RozrahunokRozrahunok mitsnosti normalnih pereriziv zalizobetonnih balok, armovanih vugletsevimi polimerami [Calculationof[Calculation of the strength of normal sections of reinforced concrete beams reinforced by carbon polymers]. Resursoekonomni materialy, konstruktsiyi, budivli ta sporudy, 15, 270–276.
Search in Google Scholar Back to article
Kvasha, V. G. (2008).Rozrahunokmitsnostinormalnih Rozrahunok mitsnosti normalnih pereriziv zalizobetonnih balok, armovanih zovnishnoyu kleenoyu kompozitnoyu armaturoyu, na osnovi deformatsiynoyi modeli [Calculationofthestrengthofnor-[Calculation of the strength of normal sections of reinforced concrete beams, reinforced by external glued composite reinforcement, on the basis of deformation model]. Resursoekonomni materialy, konstruktsiyi, budivli ta sporudy, 16, Part1, 363–371.
Search in Google Scholar Back to article
Melnyk, I. V., Dobriansky, R. Z. & Murin, A. Y. (2005). Mitsnist i deformatsiynist zalizobetonnih balok, armovanih konstruktsiynimi kompozitami, za riznih umov poperednogo navantazhennya [Strength and deformability of reinforced concrete beams reinforced by structural composites under different pre-loading conditions]. Stroitelnyye konstruktsii, 56, 121–129.
Search in Google Scholar Back to article
Rimar, Y. V. (2010). Mitsnist i deformatsiynist zalizobetonnih balok, ukriplenih pid navantazhennyam armaturnoyu armaturoyu [Strength and deformability of reinforced concrete beams reinforced under load by reinforcement fitting] (dissertation). Natsionalnyy universytet Lvivska politekhnika, Lviv.
Search in Google Scholar Back to article
Semenyuk, S. D. (2007). Posilennya stisnutoyi zoni zalizobetonnih zginalnih elementiv [The gain of the compressed zone of reinforced concrete bending elements]. In S. D. Semenyuk, Y. G. Voloshenko (eds.) Problemy suchasnoho betonu ta zalizobetonu: materialy mizhnarodnoho sympoziumu (pp. 306–321). Minsk: Screenco.
Search in Google Scholar Back to article
Shylin, A. A., Pshenichny, V. A. & Kartuzov, D. V. M. (2007). Vneshneye armirovaniye zhelezobetonnykh kon-struktsiy kompozitsionnymi materialami [External reinforcement of reinforced concrete structures with composite materials]. Moskva: Stroyizdat.
Search in Google Scholar Back to article
Smolyaninov, M. Y. (2007). Pidvischennya mitsnosti ta trischinnosti zalizobetonnih elementiv, armovanih roz-chinom akrilovogo polimeru, pid dieyu korotkochasnih statichnih i bagatorazovo povtoryuvanih navantazhen [Increase of strenght and crack strength of reinforced concrete elements reinforced by acrylic polymer solution, under the action of short-term static and repeatedly repeated loads] (dissertation). UDASH, Kharkiv.
Search in Google Scholar Back to article
State Enterprise Ukrainian Scientific Research and Training Center for Standardization, Certification and Quality Problems [SEUkrNDNC] (2011a). Betonni ta zalizobetonni konstruktsiyio. Snovni polozhennya [Concrete and reinforced concrete constructions. Basics principles] (DBN V.2.6-98:2009). Kyiv: Uk-rarkhinformbud.
Search in Google Scholar Back to article
State Enterprise Ukrainian Scientific Research and Training Center for Standardization, Certification and Quality Problems [SEUkrNDNC] (2011b). Stalezalizobetonni konstruktsiyi. Osnovni polozhennya [Reinforced concrete structures. Substantive principles] (DSTU B.V.2.6-156:2010). Kyiv: Ukrarkhinformbud.
Search in Google Scholar Back to article
Valovoy, M. O. (2009).Vplivbagatorazovihnavantazhen Vpliv bagatorazovih navantazhen na mitsnist, deformovanist ta trischinnist zalizobetonnih balok na vidhodi zbagachenih zalizobetonnih rud [Influ-[Influence of repeated loads on strength, deformability and crack strength of reinforced concrete beams on wastes of enriched ferro-concrete ores]. Resursoekonomni materialy, konstruktsiyi, budivli ta sporudy, 18, 456–462.
Search in Google Scholar Back to article
Zadorozhnikova, I. V. (2006). Zmitsnennya stisnutoyi zoni, yak zasib vidnovlennya ekspluatatsiynih yakostey zalizobetonnih zginalnih elementiv [Strengthening of the compressed zone, as a means of restoring the operational qualities of reinforced concrete bending elements] (dissertation). Lutskyy natsionalnyy tekhnichnyy universytet – LNTU, Lutsk.
Search in Google Scholar Back to article
Ziatiuk, Y. Y. (2016). Rezultati eksperimentalnih doslidzhen zalizobetonnih balok, zmitsnenih u stisnenih i roztyagnutih zonah [Results of experimental research of reinforced concrete beams strengthened in compressed and stretched zones]. Mistobuduvannya ta terytorialne planuvannya, 61 (special), 216–222.
Search in Google Scholar Back to article

Effective Methods to Strengthen the Bending Reinforced Concrete Elements

Abstract

Paradigm

My account