References
- European Committee for Standardization [CEN] (2005). Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings (EN 1993-1-1). Bruxelles: European Committee for Standardization.
- European Committee for Standardization [CEN] (2018). Execution of steel structures and aluminium structures. Technical requirements for steel structures (EN 1090-2). Bruxelles: European Committee for Standardization.
- Juraszek, J. (2018a). Hoisting machine brake linkage strain. Archives of Mining Sciences, 63 (3), 583–597. https://doi.org/10.24425/123676
- Juraszek, J. (2018b). Strain and force measurement in wire guide. Archives of Mining Sciences, 63 (2), 321–334. https://doi.org/10.24425/122450
- Juraszek, J. (2019a). Application of fiber optic FBG techniques in analysis of strain in engineering machines. New Trends in Production Engineering, 2 (1), 480–485. https://doi.org/10.2478/ntpe-2019-005110.2478/ntpe-2019-0051
- Juraszek, J. (2019b). Residual magnetic field non-destructive testing of gantry cranes. Materials, 12 (4), 564. https://doi.org/10.3390/ma1204056410.3390/ma12040564
- Juraszek, J. (2019c). Residual magnetic field for identification of damage in steel wire rope. Archives of Mining Sciences, 64 (1), 7992. https://doi.org/10.24425/ams.2019.126273
- Juraszek, J. (2020). Fiber Bragg sensors on strain analysis of power transmission lines. Materials, 13 (7), 1559. https://doi.org/10.3390/ma1307155910.3390/ma13071559
- Krajewski, M. & Iwicki, P. (2015). Analysis of brace stiffness influence on stability of the truss. International Journal of Applied Mechanics and Engineering, 20 (1), 97–108. https://doi.org/10.1515/ijame-2015-000710.1515/ijame-2015-0007
- Niewiadomski, J. & Zamorowski, J. (1987). Wpływ odkształ-ceń giętnych na sztywność osiową prętów [The influence of flexural deformation on the axial force of rods]. In XXXIII Konferencja Naukowa KILiW PAN i KN PZITB, Gliwice, Krynica 1987: referaty (Vol. 3, pp. 63–68). Gliwice: Zakład Graficzny Politechniki Śląskiej.
- Niewiadomski, L. & Zamorowski, J. (2017). Wstępne imperfekcje łukowe w analizie połaciowych stężeń poprzecznych [Initial bow imperfections in transverse roof bracing analysis]. Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo, 23, 231–244. https://doi.org/10.17512/znb.2017.1.2310.17512/znb.2017.1.23
- Piątkowski, M. (2017). Metody uwzględniania imperfekcji geometrycznych w kratownicach stalowych [The methods of consideration of geometrical imperfection in steel trusses]. Czasopismo Inżynierii Lądowej, Środowiska i Architektury – Journal of Civil Engineering, Environment and Architecture, 64 (4/I), 229–243. https://doi.org/10.7862/rb.2017.20810.7862/rb.2017.208
- Polski Komitet Normalizacyjny [PKN] (1990). Konstrukcje stalowe. Obliczenia statyczne i projektowanie (PN-B-03200:1990). Warszawa: Polski Komitet Normalizacyjny.
- Zamorowski, J. (2013). Przestrzenne konstrukcje prętowe z geometrycznymi imperfekcjami i podatnymi węzłami [Spatial bar structures with geometrics imperfections and flexible nodes]. Gliwice: Wydawnictwo Politechniki Śląskiej.
- Zamorowski, J. & Gremza, G. (2009). Advanced analysis of the load-bearing capacity of the sports hall “Saucer” in Katowice. In N. Jendzelovsky, A. Grmanova (Eds.), 7th International Conference on New Trends in Statics and Dynamics of Buildings, Bratislava, October 22–23, 2009. Conference proceedings. Bratislava: Slovak Society of Mechanics SAS.
- Zamorowski, J. & Gremza, G. (2019). Modelling of roof bracings of single-storey industrial buildings. In F. Wald, M. Jandera (Eds.), Stability and Ductility of Steel Structures 2019 (pp. 1309–1316). Leiden: CRC Press/Balkema. https://doi.org/10.1201/978042932024810.1201/9780429320248