References
- Bahadori, “A simple predictive tool for monitoring steam loss in traps,” Chemical Engineering Research and Design, vol. 90, no. 11, pp. 1896-1900, 2012.
- Emerson Process Management, “Impact of failed steam traps on process plants,” April 2013. [Online]. Available: http://www2.emersonprocess.com/. [Accessed 2014].
- J. Risko, “Understanding Steam Traps,” Chemical Engineering Progress, vol. 107, no. 2, pp. 21-26, 2011.
- Pentair Valves & Controls, “Yarway Industral Steam Trapping Handbook,” February 2013. [Online]. Available: http://valves.pentair.com/valves/Images/YAWMC-0771-US_tcm106- 37019.pdf. [Accessed 29 April 2014].
- F. Cardoso, S. Faria and J. Oliveira, “A smart sensor for the condition monitoring of industrial rotating machinery,” in Sensors, Proceedings of IEEE International Conference on , Taipei, Taiwan, 2012.
- NFC Forum, “Near field communication,” [Online]. Available: http://nfc-forum.org/. [Accessed 2014].
- HCF, “WirelessHART Technology,” [Online]. Available: http://www.hartcomm.org/protocol/wihart/wireless_technology.html. [Accessed 2013].
- Analog devices, “Temperature sensors,” 2011. [Online]. Available: http://www.analog.com/static/imported-files/data_sheets/ADT7301.pdf. [Accessed 5 May 2014].
- J. Eakburanawat and I. Noonyaroonate, “Development of a thermoelectric battery-charger with microcontroller-based maximum power point tracking technique,” Applied Energy, vol. 83, no. 7, pp. 687-704, 2005.
- M. Kocoloski, C. Eger, R. Mccarty, K. Hallinan and K. Kissock, “Industrial Solid-State Energy Harvesting: Mechanisms and Examples,” ACEEE summer study on Energy Efficiency in Industry, pp. 55-68, 2007.
- H. A. Sodano, G. E. Simmers, R. Dereux and D. J. Inman, “Recharging batteries using energy harvested from thermal gradients,” Journal of Intelligent material systems and structures, vol. 18, pp. 3-10, 2006.
- A. Puşcaş, M. Carp, C. Kertesz, P. Borza and G. Coquery, “Thermal and voltage testing and characterization of supercapacitors and batteries,” in Optimization of Electrical and Electronic Equipment (OPTIM), 2010 12th International Conference on, Brasov, Romania.
- X. Lu and S.-H. Yang, “Thermal Energy Harvesting for WSNs,” IEEE, 2010. J. P. Carmo, L. M. Gonçalves and J. H. Correia, “Thermoelectric Microconverter for Energy Harvesting Systems,” IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, vol. 57, no. 3, pp. 861-867, MARCH 2010.
- P.-H. Chen, K. Ishida, X. Zhang, Y. Okuma, Y. Ryu, M. Takamiya and
- T. Sakurai, “A 120-mV Input, Fully Integrated Dual-Mode Charge Pump in 65-nm CMOS for Thermoelectric Energy Harvester,” IEEE, 2012.
- V. Leonov, “Thermoelectric Energy Harvesting of Human Body Heat for Wearable Sensors,” Sensors Journal, IEEE , vol. 13, no. 6, pp. 2284-2291, 2013.
- Y. Ramadass and A. Chandrakasan, “A Battery-Less Thermoelectric Energy Harvesting Interface Circuit With 35 mV Startup Voltage,” Solid-State Circuits, IEEE Journal of, vol. 46, no. 1, pp. 333 - 341, 2011.
- R. Kappel, W. Pachler, M. Auer and W. Pribyl, “Using thermoelectric energy harvesting to power a self-sustaining temperature sensor in body area networks,” in Industrial Technology (ICIT), 2013 IEEE International Conference on, Cape Town.
- Lu, S. P. Park, V. Raghunathan and K. Roy, “Analysis and design of ultra low power thermoelectric energy harvesting systems,” in Low- Power Electronics and Design (ISLPED), 2010 ACM/IEEE International Symposium on, Austin, TX, USA, 2010.