References
- Post, J.W. and Bhattacharyya, A., Burn-in and thermal cyclic tests to determine the short-term reliability of a thin film resistance temperature detector. Microelectronics Reliability, 2012. 52(7): p. 1389-1395.
- Imran, M. and Bhattacharyya, A., Effect of thin film thicknesses and materials on the response of RTDs and microthermocouples. Ieee Sensors Journal, 2006. 6(6): p. 1459-1467.
- Santos, E.J.P., Vasconcelos, I.B. and Ieee, RTD-based smart temperature sensor: Process development and circuit design, in 2008 26th International Conference on Microelectronics, Vols 1 and 2, Proceedings. 2008.p. 333336.
- Nusse, D., Noetzel, R. and Vdi, Temperature Sensors in Nickel Thin Film Technology, in Sensoren Und Messsysteme 2008. 2008.p. 891-898.
- Gam, K.S., Yang, I. and Kim, Y.G., Thermal Hysteresis in Thin-Film Platinum Resistance Thermometers. International Journal of Thermophysics, 2011. 32(11-12): p. 2388-2396.
- Ljungblad, S., et al., Long Term Stability And Hysteresis Effects In Pt100 Sensors Used In Industry, in Temperature: Its Measurement and Control in Science and Industry, Vol 8, Meyer, C.W., Editor. 2013.p. 421-426.
- White, D.R., Jongenelen, C.L. and Saunders, P., The Hysteresis Characteristics of Some Industrial PRTs. International Journal of Thermophysics, 2010 31(8-9): p. 1676-1684.
- Zvizdic, D. and Sestan, D., Hysteresis of thin film IPRTs in the Range 100 degrees C to 600 degrees C, in Temperature: Its Measurement and Control in Science and Industry, Vol 8, Meyer, C.W., Editor. 2013. p. 445-450.
- Berry, R.J., THERMAL STRAIN EFFECTS IN STANDARD PLATINUM RESISTANCE THERMOMETERS. Metrologia, 1983 19(1): p. 37-47.
- Bonham, C., et al., Stagnation temperature measurement using thin-film platinum resistance sensors. Measurement Science & Technology, 2014 25(1).
- Firebaugh, S.L., Jensen, K.F. and Schmidt, M.A., Investigation of high-temperature degradation of platinum thin films with an in situ resistance measurement apparatus. Journal of Microelectromechanical Systems, 1998 7(1): p. 128-135.
- Sato, H., Stability Test of Industrial Platinum Resistance Thermometers at 450 degrees C for 1000 hours, in Temperature: Its Measurement and Control in Science and Industry, Vol 8, Meyer, C.W., Editor. 2013. p. 417-419.
- Lacy, F., Evaluating the Resistivity-Temperature Relationship for RTDs and Other Conductors. Ieee Sensors Journal, 2011 11(5): p. 1208-1213.