Figure 1:
MIMO radar probability of detection variations with respect to the antenna variation.
Figure 2:
MIMO radar output SNR variations with respect to the antenna variation.
Figure 3:
Radar setup with stand-alone instruments.
Figure 4:
(A) Spectrum of the reference signal at VSA; (B) reference signal at VSA.
Figure 5:
(A) Spectrum of the received signal at VSA; (B) received signal at VSA.
Figure 6:
(A) Radar test range; (B) flat plate (target) placed over Pylon.
Figure 7:
Range measurement.
Figure 8:
WARP SDR hardware platform (http://warpproject.org/trac/wiki/GettingStarted/WARPv3/Hardware).
Figure 9:
2 × 2 MIMO radar setup.
Figure 10:
(A) Transmitted signal from SDR platform; (B) received signal at the SDR platform.
Figure 11:
Target characterization using 2 × 2 MIMO radar.