Quantitative Feedback Theory-Based Robust Control for a Spindle of Lathe Machine
By:
References
- S. Arali and V.V. Kulkarni, “Analysis of cnc lathe spindle for maximum cutting force condition and bearing life,” International Journal of Innovative Research in Advanced Engineering (IJIRAE). Volume 1 Issue 6 (July 2014): 346-352.
- Martin,K.F., M. Ebrahimi, “Modelling and simulation of the milling action,” Proc. Instn Mech Engrs, 213, part B, 539-554. (July 1999)10.1243/0954405991517001
- Wen-Hong Z., M.B. Jun, and Y. Altintas, “A fast tool servo design for precision of shafts on conventional CNC lathes,” International Journal of Machine Tools & Manufacture, 41, 953965. (2001).10.1016/S0890-6955(00)00118-8
- S. Shivakumar, Anupama N Kallol, Vishwanath Khadakbhavi, “Analysis of lathe spindle using ansys,” International Journal of Scientific & Engineering Research, Volume 4, Issue 9, September-2013 431.
- V. R. Reddy and A. M. Sharan, “The finite element modelled design of lathe spindles: the static and dynamic analyses,” Journal of Vibration and Acoustics Volume 109 (4). 1987.10.1115/1.3269461
- Chi-Wei Lin, Yang-Kuei Lin, Chih-Hsing Chu, “Dynamic Models and Design of SpindleBearing Systems of Machine Tools: A Review.” International Journal Of Precision Engineering And Manufacturing, Vol. 14, No. 3, pp. 513-521, 2013.10.1007/s12541-013-0070-6
- Ravi Lingarkar. Liu Liu, Mohamed A. Elbastawi, Naresh K. Sinha, “Knowledge base adaptive computer control in manufacturing system : case study,” IEEE Transaction System, man and Cybernetics, Vol.20,No.3, 1990.10.1109/21.57273
- Takehito Azuma, “Design And Experimental Verification of State Predictive Lqg Controllers for Networked Control Systems”, International Journal on Smart Sensing and Intelligent Systems, Vol.7.No.3,2014.10.21307/ijssis-2017-701
- Gao Xiaoxing and Liu Feng, “Robust Visual Tracking Based on Support Vector Machine and Weighted Sampling Method”, International Journal on Smart Sensing and Intelligent Systems Vol.8.No.1.2015.10.21307/ijssis-2017-758
- Tu, J., Corless, M., and Jeppsson, J, “Robust control of high speed end milling with unknown process parameter and cnc delay.” J. Aerosp. Eng., 17(1), 1–9, 2004.10.1061/(ASCE)0893-1321(2004)17:1(1)
- Van de Wouw, N, Doppenberg, E.J.J, Oosterling, H.A.J, Nijmeijer, H, “Robust active chatter control in the high-speed milling process” IEEE Transactions on Control Systems Technology, Volume 20, Issue 4, pp 901 – 917, 2012.10.1109/TCST.2011.2157160
- Landau, Ioan Dore, “System Identification and Control Design Using P.I.M + Software” Prentice Hall Inc., 1988.
- M. Khairudin, “Robust Control Design for Spindle of Lathe Machine”, Proceeding of The 2nd International Conference on Information Technology, Computer and Electrical Engineering, 16-18th October 2015, Semarang-Indonesia.10.1109/ICITACEE.2015.7437804
DOI: https://doi.org/10.21307/ijssis-2017-939 | Journal eISSN: 1178-5608
Language: English
Page range: 1776 - 1794
Submitted on: Jul 3, 2016
Accepted on: Oct 21, 2016
Published on: Dec 1, 2016
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2016 M. Khairudin, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.