Acoustic Emission Based Defects Monitoring Of Threedimensional Braided Composites Using Wavelet Network
By:
References
- Wan ZhenKai, “Acoustic Emission Analysis of The Flexural and Tensile properties of 3-D Braided Composite Materials”, Journal of Textile Research, Vol 28, No.4, pp-53-55,2007.
- Whitwoth HA, “Evaluation of the residual strength degradation in composite laminates under loading”, Composite structures, Vol 48,No.4,pp-261-264,2011.
- Wan Zhenkai, Wang Zhangang, “Reserch on Flaw Detection for Composite Material Using Ultrasonic Testing Based on Neural Network “, Journal of Textile Research, Vol 31,No.2,pp-55-59, 2010 Feb.
- Wenfeng Hao, Yanan Yuan, Xuefeng Yao, Yinji Ma, “Computational analysis of fatigue behavior of 3D 4-directional braided composites based on unit cell approach”, Advances in Engineering Software 82 pp-38-52,2015
- Drach A, Drach B, “Tsukrov I.,Processing of fiber architecture data for finite element modeling of 3D woven composites”, Advances in Engineering Software,72:pp-18-27,2014.
- Dong J, Feng M., “Asymptotic expansion homogenization for simulating progressive damage of 3D braided composites”, Composite Structure 92:873 - 82,2010.
- Giovanni Perillo, Frode Grytten, Steinar S, Virgile Delhaye, “Numerical/experimental impact events on filament wound composite pressure vessel”, Composites: Part B, vol 69, pp.406 - 417, 2015.
- Mesut Uyaner, Memduh Kara, Aykut S_ahin, “Fatigue behavior of filament wound E-glass/epoxy composite tubes damaged by low velocity impact”, Composites: Part B, vol61,pp. 358 - 364,2014.
- Bilisik K., “Multiaxis 3D Woven Preform and Properties of Multiaxis 3D Woven and 3D Orthogonal Woven Carbon/Epoxy Composites”, Journal of Reinforced Plastics and Composites, Vol29,No.8,pp-1173-1186,2010.
- Karahan M, Lomov SV, Bogdanovich AE, “Fatigue tensile behavior of carbon/epoxy composite reinforced with non-crimp 3D orthogonal woven fabric”,Composites Science and Technology, Vol71, No.16, pp-1961-1972,2011.
- Wei Fan, Jia-lu Li, Yuan-yuan Zheng, “Improved thermo-oxidative stability of three-dimensional and four-directional braided carbon fiber/epoxy hierarchical composites using graphene-reinforced gradient interface layer”, Polymer Testing 44, pp-177-185,2015.
- Zaman W, Li K, Ikram S, Li W, Zhang D, Guo L. “Morphology, thermal response and anti-ablation performance of 3D-four directional pitch-based carbon/carbon composites”, Corros Sci 61:134 - 42,2012.
- Ozaki, H., Omura, Y. “An advanced nonlinear signal model to analyze pulsation-derived photoplethysmogram signals”, International Journal on Smart Sensing and Intelligent Systems, Vol.8, No. 2, pp-921-943, 2015.
- Salah H. R. Ali, “Method of optimal measurement strategy for ultra-high-precision machine in roundness nano-metrology”, International Journal on Smart Sensing and Intelligent Systems, VOL. 8, NO. 2, pp-896 – 920,June 2015.
- Adam Funnell, Xiaomin Xu, Jize Yan, Kenichi Soga, “Simulation of noise within BOTDA and COTDR systens to study the inpact on dynamic sensing”, International Journal on Smart Sensing and Intelligent Systems, VOL. 8, NO. 3,pp-1576 – 1600,Sep. 2015.
DOI: https://doi.org/10.21307/ijssis-2017-895 | Journal eISSN: 1178-5608
Language: English
Page range: 780 - 798
Submitted on: Nov 7, 2016
Accepted on: Jan 22, 2015
Published on: Jun 1, 2016
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2016 Su Hua, Zhang Tianyuan, Zhang Ning, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.