M. Assaad, I. Yohannes, A. Bermak, D. Ginhac, and F. Meriaudeau, “Design and characterization of automated color sensor system,” Int. J. smart Sens. Intell. Syst., vol. 7, no. 1, pp. 1–12, 2014.10.21307/ijssis-2017-642
D. Bhattacharjee, G. Sharma, and R. Bera, “Universal intelligent sensor interface,” Int. J. Smart Sens. Intell. Syst., vol. 8, no. 4, pp. 2307–2327, 2015.
J. Hughes, J. Yan, and S. Kenichi, “Development of Wireless Sensor Network Using Bluetooth Low Energy (Ble) for Construction,” Int. J. Smart Sens. Intell. Syst., vol. 8, no. 2, pp. 1379–1405, 2015.
M. Liess, H. Karagözoglu, and H. Ernst, “Reducing thermal transient induced errors in thermopile sensors in ear thermometer applications,” Sensors Actuators A Phys., vol. 154, no. 1, pp. 1 –6, Aug. 2009.10.1016/j.sna.2009.05.013
G. Sun, T. Saga, T. Shimizu, Y. Hakozaki, and T. Matsui, “Fever screening of seasonal influenza patients using a cost-effective thermopile array with small pixels for close-range thermometry.,” Int. J. Infect. Dis. -IJID Off. Publ. Int. Soc. Infect. Dis., vol. 25, pp. 56–8, Aug. 2014.10.1016/j.ijid.2014.03.1398711053624858901
A. Mahajan, C. Oesch, H. Padmanaban, L. Utterback, and F. Figueroa, “Physical and Virtual Intelligent Sensors for Integrated Health Management Systems,” Int. J. Smart Sens. Intell. Syst., vol. 5, no. 3, pp. 559–575, 2012.10.21307/ijssis-2017-495
J. Higuera-Guisset, J. Rodríguez-Viejo, M. Chacón, F. J. Muñoz, N. Vigués, and J. Mas, “Calorimetry of microbial growth using a thermopile based microreactor,” Thermochim. Acta, vol. 427, no. 1–2, pp. 187–191, Mar. 2005.10.1016/j.tca.2004.09.010
S. a. O’Shaughnessy, M. a. Hebel, S. R. Evett, and P. D. Colaizzi, “Evaluation of a wireless infrared thermometer with a narrow field of view,” Comput. Electron. Agric., vol. 76, no. 1, pp. 59–68, Mar. 2011.10.1016/j.compag.2010.12.017
R. I. Rodriguez and Y. Jia, “A wireless inductive-capacitive (L-C) sensor for rotating component temperature monitoring,” Int. J. Smart Sens. Intell. Syst., vol. 4, no. 2, pp. 325– 337, 2011.10.21307/ijssis-2017-442
K. Keränen, J.-T. Mäkinen, P. Korhonen, E. Juntunen, V. Heikkinen, and J. Mäkelä, “Infrared temperature sensor system for mobile devices,” Sensors Actuators A Phys., vol. 158, no. 1, pp. 161–167, Mar. 2010.10.1016/j.sna.2009.12.023
S. P. Singh and P. Singh, “Effect of temperature and light on the growth of algae species: A review,” Renew. Sustain. Energy Rev., vol. 50, pp. 431–444, 2015.10.1016/j.rser.2015.05.024
J.-S. Botero V., W. Hernandez, and E. Fernandez, “Orientation of a triaxial accelerometer using a homogeneous transformation matrix and Kalman filters,” Int. J. Smart Sens. ilntelligentSyst., vol. 7, no. 4, pp. 1631-1646, 2014.
M. Kiani, S. H. Pourtakdoust, and A. A. Sheikhy, “Consistent calibration of magnetometers for nonlinear attitude determination,” Measurement, vol. 73, pp. 18O–19O, 2015.10.1016/j.measurement.2015.05.005
ASTM International, “E220-13, Standard Test Method for Calibration of Thermocouples By Comparison Techniques,” in Book of Standards, West Conshohocken, PA: ASTM International, 2013.
C. Chen, Y.-K. Weng, and T.-C. Shen, “Performance evaluation of an infrared thermocouple.,” Sensors (Basel)., vol. 10, no. 11, pp. 10081–94, Jan. 2010.
A. Chen and C. Chen, “Evaluation of piecewise polynomial equations for two types of thermocouples.,” Sensors (Basel)., vol. 13, no. 12, pp. 17084–97, Jan. 2013.
N. Afsarimanesh and P. Z. Ahmed, “LabVIEW Based Characterization and Optimization of Thermal Sensors,” Int. J. Smart Sens. Intell. Syst., vol. 4, no. 4, pp. 726–739, 2011.10.21307/ijssis-2017-466
J. S. Steinhart and S. R. Hart, “Calibration curves for thermistors,” Deep Sea Res. Oceanogr. Abstr., vol. 15, no. 4, pp. 497–503, 1968.10.1016/0011-7471(68)90057-0