B. Choubey, C. Anthony, N. H. Saad, M. Ward, R. Turnbull, and S. Collins, “Characterization of coupled micro/nano resonators using inverse eigenvalue analysis,” Appl. Phys. Lett., vol. 97, pp. 133 114–7, 2010.10.1063/1.3491802
K. Park, N. Kim, D. Morisette, N. Aluru, and R. Bashir, “Resonant mems mass sensors for measurement of microdroplet evaporation,” Microelectromechanical Systems, Journal of, vol. 21, no. 3, pp. 702–711, June 2012.10.1109/JMEMS.2012.2189359
G. Blanco-Gomez and V. Agache, “Experimental study of energy dissipation in high quality factor hollow square plate mems resonators for liquid mass sensing,” Microelectromechanical Systems, Journal of, vol. 21, no. 1, pp. 224–234, Feb 2012.10.1109/JMEMS.2011.2170820
A. Hajjam, J. Wilson, and S. Pourkamali, “Individual air-borne particle mass measurement using high-frequency micromechanical resonators,” Sensors Journal, IEEE, vol. 11, no. 11, pp. 2883–2890, Nov 2011.
M. Kumar and H. Bhaskaran, “Ultrasensitive room-temperature piezoresistive transduction in graphene-based nanoelectromechanical systems,” Nano Letters, vol. 15, no. 4, pp. 2562–2567, 2015.
Y. T. Yang, C. Callegari, X. L. Feng, K. L. Ekinci,, and M. L. Roukes, “Zeptogram-scale nanomechanical mass sensing,” Nano Letters, vol. 6, no. 4, pp. 583–586, 2006.10.1021/nl052134m16608248
A. Hajjam, A. Logan, and S. Pourkamali, “Doping-induced temperature compensation of thermally actuated high-frequency silicon micromechanical resonators,” Microelectromechanical Systems, Journal of, vol. 21, no. 3, pp. 681–687, June 2012.10.1109/JMEMS.2012.2185217
A. Hajjam, A. Rahafrooz, J. Wilson, and S. Pourkamali, “Thermally actuated mems resonant sensors for mass measurement of micro/nanoscale aerosol particles,” in Sensors, 2009 IEEE, October 2009, pp. 707 –710.10.1109/ICSENS.2009.5398557
A. Ozturk, H. Ocakli, N. Ozber, H. Urey, I. Kavakli, and B. Alaca, “A magnetically actuated resonant mass sensor with integrated optical readout,” Photonics Technology Letters, IEEE, vol. 20, no. 23, pp. 1905–1907, Dec 2008.
J. Verd, A. Uranga, G. Abadal, J. Teva, F. Torres, F. Prez-Murano, J. Fraxedas, J. Esteve, and N. Barniol, “Monolithic mass sensor fabricated using a conventional technology with attogram resolution in air conditions,” Applied Physics Letters, vol. 91, no. 1, 2007.10.1063/1.2753120
B. Choubey, E. Boyd, I. Armstrong, and D. Uttamchandani, “Determination of the anisotropy of young’s modulus using a coupled microcantilever array,” Microelectromechanical Systems, Journal of, vol. 21, no. 5, pp. 1252–1260, Oct 2012.
B. Choubey, S. Collins, and M. Ward, “On characterizing microelectromechanical processes using coupled resonators,” Microelectromechanical Systems, Journal of, vol. 21, no. 4, pp. 791–800, Aug 2012.10.1109/JMEMS.2012.2190821
J. Arcamone, G. Rius, G. Abadal, J. Teva, N. Barniol, and F. Perez-Murano, “Micro/nanomechanical resonators for distributed mass sensing with capacitive detection,” Microelectronic Engineering, vol. 83, no. 4-9, pp. 1216 – 1220, 2006.
R. Mestrom, R. Fey, J. van Beek, K. Phan, and H. Nijmeijer, “Modelling the dynamics of a MEMS resonator: Simulations and experiments,” Sensors and Actuators A: Physical, vol. 142, no. 1, pp. 306 – 315, 2008.10.1016/j.sna.2007.04.025
A. K. Ismail, J. S. Burdess, A. J. Harris, G. Suarez, N. Keegan, J. A. Spoors, S. C. Chang, C. J. McNeil, and J. Hedley, “The fabrication, characterization and testing of a mems circular diaphragm mass sensor,” Journal of Micromechanics and Microengineering, vol. 18, no. 2, p. 025021, 2008.
S. Joshi, S. Hung, and S. Vengallatore, “Design strategies for controlling damping in micromechanical and nanomechanical resonators,” EPJ Techniques and Instrumentation, vol. 1, no. 1, 2014.10.1140/epjti5
M. Bao and H. Yang, “Squeeze film air damping in {MEMS},” Sensors and Actuators A: Physical, vol. 136, no. 1, pp. 3 – 27, 2007.10.1016/j.sna.2007.01.008
Z. Davis, W. Svendsen, and A. Boisen, “Design, fabrication and testing of a novel MEMS resonator for mass sensing applications,” Microelectronic Engineering, vol. 84, no. 5-8, pp. 1601–1605, May 2007.
C. Anthony, R. Turnbull, X. Wei, M. Ward, and S. Collins, “Fabrication and quality factor control of a microelectromechanical system resonator with linear differential drive,” Science, Measurement Technology, IET, vol. 4, no. 4, pp. 206–213, July 2010.10.1049/iet-smt.2009.0081
M. Agarwal, K. K. Park, R. Candler, B. Kim, M. Hopcroft, S. A. Chandorkar, C. Jha, R. Melamud, T. Kenny, and B. Murmann, “Nonlinear characterization of electrostatic mems resonators,” in International Frequency Control Symposium and Exposition, 2006 IEEE, June 2006, pp. 209–212.10.1109/FREQ.2006.275380
C. Deng and S. Collins, “The transient response of a duffing resonator following a parameter change,” in Circuits and Systems, 52nd IEEE International Midwest Symposium on, Aug 2009, pp. 790–793.10.1109/MWSCAS.2009.5235887
S. Zaitsev, O. Shtempluck, E. Buks, and O. Gottlieb, “Nonlinear damping in a micromechanical oscillator,” Nonlinear Dynamics, vol. 67, no. 1, pp. 859–883, 2012.10.1007/s11071-011-0031-5
B. Choubey, “An experimental investigation of coupled van der pol oscillators,” Transaction of ASME, Journal of Vibration and Acoustics, vol. 132, p. 031013, 2010.
B. Choubey, M. Ward, and S. Collins, “On readouts of multiple micro/nano resonator sensors with mismatch,” in Proceedings of the IEEE Sensors Conference, 2008.10.1109/ICSENS.2008.4716481