References
- N. Guerrassi and P. Dupraz, “A Common Rail Injection System For High Speed Direct Injection Diesel Engines”, SAE Technical Paper 980803, 1998.
- K. C. Bayindir, M. A. Gözüküçük and A. Teke, “A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units”, Energy Conversion and Management, vol. 52, No. 2, 2011, pp. 1305-1313.
- Q. Hayat, L. Y. Fan, X. Z. Ma and B. Q. Tian, “Comparative Study of Pressure Wave Mathematical Models for HP Fuel Pipeline of CEUP at Various Operating Conditions”, International Journal of Smart Sensing and Intelligent Systems, vol. 6, No. 3, 2013, pp. 1077-1101.
- L. Y. Fan, P. H. Li and E. Z. Song, “Research on Electronic Control Unit of Electronic Unit Pump Fuel Injection System for Diesel Engines”, Proceedings of the 2012 Third International Conference on Mechanic Automation and Control Engineering. IEEE Computer Society, 2012, pp. 605-608.
- S. Y. Yang and S. H. Chung, “An experimental Study on the Effects of High-Pressure and Multiple Injection Strategies on DI Diesel Engine Emissions”, SAE Technical Paper 2013-01-0045, 2013.
- P. Lauvin, A. Löffler, A. Schmitt and W. Zimmermann, “Electronically Controlled High Pressure Unit Injector System for Diesel Engines”, SAE Technical Paper 911819, 1991.
- C. L. Zhao, “Research on Injection System of Electronic Unit Pump Diesel”, Chinese Internal Combustion Engine Engineering, 2004, 2, pp. 22-23.
- W. Boehner and K. Hummel, “Common Rail Injection System for Commercial Diesel Vehicles”, SAE Technical Paper 970345, 1997.
- G. L. Shi, “On the researches of high speed solenoid on/off valve and its applications”, Machine Tool & Hydraulics, 2001, 1, pp. 1-2.
- L. C. Passarini and P. R. Nakajima, “Development of a high-speed solenoid valve: an investigation of the importance of the armature mass on the dynamic response”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 25, No. 4, 2003, pp. 329-335.
- G. Bianchi, P. Pelloni, F. Filicori and G. Vannini, “Optimization of the Solenoid Valve Behavior in Common-Rail Injection Systems”, SAE Technical Paper 2000-01-2042, 2000.
- Kajima and Takashi. “Dynamic model of the plunger type solenoids at deenergizing state”, IEEE Transactions on magnetics, vol. 31, No. 3, 1995, pp. 2315-2323.
- R. Kusakabe, M. Abe, H. Ehara and T. Ishikawa, “Injection Quantity Range Enhancement by Using Current Waveform Control Technique for DI Gasoline Injector”, SAE Technical Paper 2014-01-1211, 2014.
- T. Nakao, H. Han and Y. Koshimoto, “Fundamental study of magnetically levitated contact-free micro-bearing for MEMS applications”, International Journal on Smart Sensing and Intelligent Systems, vol. 3, No. 3, 2010, pp. 536-549.
- S. Wang, T. Miyano and M. Hubbard, “Personal Computer Design Software for Magnetic Analysis and Dynamic Simulation of a Two-Valve Solenoid Actuator”, SAE Technical Paper 921086, 1992.
- Asai, Yasuyoshi, K. Hirata, and T. Ota. “Amplitude Control Method of Linear Resonant Actuator by Load Estimation From the Back-EMF”, IEEE transactions on magnetics, vol.49, No.5, 2013, pp. 2253-2256.
- H. Lu, J. Deng, Z. Hu and Z. Wu, “Impact of Control Methods on Dynamic Characteristic of High Speed Solenoid Injectors”, SAE Technical Paper 2014-01-1445, 2014.
- S. Domanski, “Effects Contributing to the Temperature Rise of Electromagnetic Actuators”, SAE Technical Paper 2000-01-0543, 2000.
- Araujo, W. Pedro and Richard G. Brereton, “Experimental design II. Optimization”, TrAC Trends in Analytical Chemistry, vol.15, No. 2, 1996, pp. 63-70.
- J. D. Tew, “Using central composite designs in simulation experiments”, Proceedings of the 24th conference on Winter simulation, 1992, pp. 529-538.
- B. Huber and H. Ulbrich, “Modeling and experimental validation of the solenoid valve of a common rail diesel injector”, SAE Technical Paper 2014-01-0195, 2014.