Identification and Detection of Defect in Metal Casing
By:
References
- Lin Naiming, Xie Faqin, Wu Xiangming, et al. “Review on the development and prospect of surface protection technology for oil casing tubes”, Corrosion and Protection,Vol.30, No.11, 2009, pp.801-805.
- D Oliver, Sondex, Bramshill, et al., “New slimline electromagnetic casing inspection technology”, Society of Petrophysicsts and Well Log Analysts(SPWLA) 45th Annual Logging Symposium, June, 2004.
- Li Na, Rong Haibo and Zhao Guoxian, “Research progress in corrosion resistant tubing and casing materials”, Chinese Journal of Materials Science and Engineering, Vol.29, No3, 2011, pp.471-477.
- Thilo Michael Brill, Jean-Luc Le Calvez, SPE,et al., “Quantitative corrosion assessment with an EM casing inspection Tool”, Society of Petroleum Engineers, SPE 149069, 2011.
- J.Y Julian, D.A. Crismoski, R.O.Younger, et al., “Use of 3D visualization software for mulifinger caliper analysis at prudhoe bay, Alaska”, Society of Petroleum Engineers, SPE 106625, 2007.
- S. Yamada, H. Fujiki, M. Iwahara, S. C. Mukhopadhyay and F. P. Dawson, “Investigation of Printed Wiring Board Testing By Using Planar Coil Type ECT Probe”, IEEE Transactions on Magnetics, Vol. 33, No. 5, Sept, 1997, pp 3376-3378.
- S. C. Mukhopadhyay, M. Iwahara, and S. Yamada, “Necessity of electromagnetic field computation for magnetic current limiter”, International journal on Applied Electromagnetics and Mechanics, vol. 14, pp 47-50, 2002.
- S. C. Mukhopadhyay, “Quality inspection of electroplated materials using planar type micro- magnetic sensors with post processing from neural network model”, IEE Proceedings – Science, Measurement and Technology, Vol. 149, No. 4, pp. 165-171, July 2002.
- Zhang Jiatian, Yan Zhenguo, Hu Changling, et al., “Down-hole video imaging technology”, Chinese journal of scientific instrument, Vol. 28, No.4, 2007, pp 714-717.
- S. C. Mukhopadhyay, “A Novel Planar Mesh Type Micro-electromagnetic Sensor: Part I - Model Formulation”, IEEE Sensors journal, Vol. 4, No. 3, pp. 301-307, June 2004.
- Zhang Enlun, “Application of downhole imaging technique in spection of wells with a broke casing”, Henan petroleum(in Chinese), Vol.16, No.4, 2002, pp 41-42.
- G Frisch and B. Mandal, “Advanced ultrasonic scanning tool and evaluation methods improve and standardize casing inspection”, Society of Petroleum Engineers, SPE 71399, 2001.
- S. C. Mukhopadhyay, F. P. Dawson, M. Iwahara and S. Yamada, “A Novel Compact Magnetic Current Limiter for Three Phase Applications”, IEEE Transactions on Magnetics, Vol. 36, No. 5, pp. 3568-3570, September 2000.
- M. A. Sharar, D.A. Cuthill and K. Edwards. “High resolution casing imaging utilizing magnetic flux leakage measurements”, Society of Petrophysicsts and Well Log Analysts (SPWLA) 49th Annual Logging Symposium, May, 2008.
- Fu Xiguang, Yan Guozheng, Zuo Jianyong, et al., “Research on intelligence pipeline wall thickness system based on magnetic flux leakage principle”, Chinese Journal of Scientific Instrument, Vol.25, No.6, 2004, pp.799-801.
- Marvin Rourke, Yingxin Jin and Qiuzhao Dong, “Algorithm development and case study for A 1-11/16” pulsed eddy current casing inspection tool”, Society of Petrophysicsts and Well Log Analysts(SPWLA) 55th Annual Logging Symposium, May,2014.
- Wu Xiangnan, Li Longjie, Zhang Bing, et al., “3D visually detection of surface topography of metal materials using eddy current sensors”, Chinese Journal of Sensors and Actuators, Vol.25, No.3, 2012, pp. 370-373.
- Zhang Jing, Xie Shejuan and Chen Zhenmao, “Direct current potential drop inspection technique for metallic foam”, Chinese Journal of Nondestructive Testing, Vol.32, No.8, 2010, pp. 612-615.
- Wan Zhengjun, Liao Junbi, Wang Yukang, et al., “Research on metal tubing pit corrosion monitoring based on potential-array method”, Chinese Journal of Scientific Instrument, Vol.32, No.1, 2011, pp. 19-25.
- Xu Wu and Tarek M. Habashy, “influence of steel casings on electromagnetic signals”, Geophysics, Vol.59, No.3, 1994, pp378-390.
- H. B. Dwight, “Skin effect in tubular and flat conductors”, AIEE, Vol.37, No.2, 1918, pp.1379-1403.
- S. C. Mukhopadhyay, K. Chomsuwan, C. Gooneratne and S. Yamada, “A Novel Needle-Type SV-GMR Sensor for Biomedical Applications”, IEEE Sensors Journal, Vol. 7, No. 3, pp. 401-408, March 2007.
- W. Mingli , F. Yu, “Numerical calculations of internal impedance of solid and tubular cylindrical conductors under large parameters” , IEE Proc-Gener. Transm. Distrib, Vol.151, No.1, 2004, pp.67-72.
- S. Yamada, K. Chomsuwan, S. C. Mukhopadhyay, M. Iwahara, M. Kakikawa and I. Nagano, “Detection of Magnetic Fluid Volume Density with a GMR Sensor”, Journal of Magnetics Society of Japan, Vol. 31, No. 2, pp. 44-47, 2007.
- Chao Lidong, Wu Jie and Wang Zhongyi, “Engineering Electromagnetics”, Northwestern Polytechnical University Press, pp.50-60, August 2001.
- William H. Hayt. Jr., John A. Buck, “Engineering Electromagnetics(seventh edition)”, Tsinghua University Press, 2009, pp. 352-355.
DOI: https://doi.org/10.21307/ijssis-2017-806 | Journal eISSN: 1178-5608
Language: English
Page range: 1261 - 1283
Submitted on: Jan 6, 2015
Accepted on: Apr 25, 2015
Published on: Jun 1, 2015
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2015 Yinchuan Wu, Baolong Guo, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.