M. Ramzi, N. Bennis, H. Youlal and M. Haloua, “Decentralized PI-D Controller applied to an Aerothermic Process”, International journal on smart sensing and intelligent systems, vol. 5, no. 4, 2012, pp. 1003-1018.10.21307/ijssis-2017-520
M. Ramzi, H. Youlal and M. Haloua, “Continuous Time Identification and Decentralized PID Controller of an Aerothermic Process”, International journal on smart sensing and intelligent systems, vol. 5, no. 2, 2012, pp. 487-503.10.21307/ijssis-2017-491
N. Bennis, M. Ramzi, H. Youlal and M. Haloua, “LMI solutions for H2 and H∞ decentralized controllers applied to an Aerothermic Process”, J Control Theory Appl, Vol. 11, No. 2, 2013, pp. 141–148.10.1007/s11768-013-1187-y
M. Ramzi, H. Youlal and M. Haloua, “State Space Model Predictive Control of an Aerothermic Process with Actuators Constraints,” Intelligent Control and Automation, Vol. 3 No. 1, 2012, pp. 50-58.10.4236/ica.2012.31007
N. Bennis, J. Duplaix, G. Enéa, M. Haloua, H. Youlal, “Greenhouse climate modelling and robust control”, Computers and Electronics in Agriculture, Vol. 61, 2008, pp. 96-107.10.1016/j.compag.2007.09.014
M.F. Rahmat, N.A. Mohd Subha, Kashif M.Ishaq, N. Abdul Wahab, “Modeling and controller design for the VVS-400 pilot scale heating and ventillation system”, International journal on smart sensing and intelligent systems, Vol. 2, No. 4, 2009, pp. 579-601.10.21307/ijssis-2017-369
Yong Xiao, Chi Zhang, Xiaoyu Ge, Peiqi Pan, “Feedforward control of temperature-induced head skew for hard disk drives”, International journal on smart sensing and intelligent systems, Vol. 5, no. 1, 2012, pp. 95-105.10.21307/ijssis-2017-473
Mohd Fua’ad Rahmat, Amir Mehdi Yazdani, Mohammad Ahmadi Movahed, Somaiyeh Mahmoudzadeh, “Temperature control of a continuous stirred tank reactor by means of two different intelligent strategies”, International journal on smart sensing and intelligent systems, Vol. 4, no. 2, 2011, pp. 244-267.10.21307/ijssis-2017-438
Aman Tyagi, Arrabothu Apoorv Reddy, Jasmeet Singh, Shubhajit Roy Chowdhury, “low cost portable temperature-moisture sensing unit with artificial neural network based signal conditioning for smart irrigation applications”, International journal on smart sensing and intelligent systems, Vol. 4, no. 1, 2011, pp. 94-111.10.21307/ijssis-2017-428
J. Y. Chang, “Thermal analysis and design of disk-spindle radial repeatable runout in spinning data storage devices,” IEEE Transactions on Magnetics, vol. 47, no. 7, 2011, pp. 1855-1861.10.1109/TMAG.2011.2116773
T. Kealy, A. O’Dwyer, “Closed Loop Identification of a First Order plus Dead Time Process Model under PI Control”, Proceedings of the Irish Signals and Systems Conference, University College, Cork, 2002, pp. 9-14.
D.M. de la Pena, D.R. Ramirez, E.F. Camacho, T. Alamo, “Application of an explicit min-max MPC to a scaled laboratory process”, Control Eng. Practice, Vol. 13, No. 12, 2005, pp. 1463-1471.10.1016/j.conengprac.2004.12.008
E. Yesil, M.Guzelkaya, I.Eksin, O. A. Tekin, “Online Tuning of Set-point Regulator with a Blending Mechanism Using PI Controller”. Turk J Elec Engin, 2008, Vol.16, No. 2, pp. 143-157
R. Mooney and A. O’Dwyer, “A case study in modeling and process control: the control of a pilot scale heating and ventilation system”, Proceedings of IMC-23; the 23rd International Manufacturing Conference, University of Ulster, Jordanstown, August, 2006, pp. 123-130.
H. Garnier, M. Gilson, T. Bastogne, and M. Mensler, “CONTSID toolbox: a software support for continuous-time data-based modelling. In Identification of continuous time models from sampled data”, H.Garnier and L. Wang (Eds.), Springer, London, 2008, pp. 249290.10.1007/978-1-84800-161-9_9
S.C.Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, “Design, Analysis and Control of a New Repulsive Type Magnetic Bearing”, IEE proceeding on Electric Power Applications, vol. 146, no. 1, pp. 33-40, January 1999.10.1049/ip-epa:19990203
H. Garnier, L. Wang, and P.C. Young, “Direct Identification of Continuous-time Models from Sampled Data: Issues, Basic Solutions and Relevance in Identification of continuoustime models from sampled data”, Springer, London, 2008, pp. 1-29.10.1007/978-1-84800-161-9_1
S.C.Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, “Modeling and Control of a New Horizontal Shaft Hybrid Type Magnetic Bearing”, IEEE Transactions on Industrial Electronics, Vol. 47, No. 1, pp. 100-108, February 2000.10.1109/41.824131
Hugues Garnier, “Data-based continuous-time modelling of dynamic systems”, 4th International Symposium on Advanced Control of Industrial Processes, Adconip China 2011, pp. 146-153.
G. Sen Gupta, S.C.Mukhopadhyay, S. Demidenko and C.H.Messom, “Master-slave Control of a Teleoperated Anthropomorphic Robotic Arm with Gripping Force Sensing”, IEEE Transactions on Instrumentation and Measurement, Vol. 55, No. 6, pp. 2136-2145, December 2006.
V. Laurain, M. Gilson, R. Toth, H. Garnier, “Direct identification of continuous-time LPV models”, American Control Conference, 2011, pp. 159-16410.1109/ACC.2011.5991286