Have a personal or library account? Click to login

Error Modeling And Compensation Of 3D Scanning Robot System Based On Pso-Rbfnn

By:
Open Access
|Dec 2017

References

  1. Larsson SOREN and KJELLANDER J.A.P, “An industrial robot and a laser scanner as a flexible solution towards an automatic system for reverse engineering of unknown objects,” Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis ,pp.341-350, 2004.10.1115/ESDA2004-58277
  2. Li Jianfeng,Zhu Jianhua and Tang Qing,”Scanning method of robot-3D scanner system and its industrial application,”Opto-Electronic Engineering, Vol. 34, No. 2, pp. 15-21, February 2007.
  3. Jianhao Zhang and Jinda Cai, “Error Analysis and Compensation Method Of 6-axis Industrial Robot,” International Journal on Smart Sensing and Intelligent System, Vol.6,No.4, September 2013, pp. 1383-1399.10.21307/ijssis-2017-595
  4. MA Zi, XU Huipu, HU Ying and et al,”A novel robot surface measurement system enhanced with 3D surface reconstruction,” International Journal of Modeling Identification and Control, Vol. 4, No. 3, pp. 286-298, 2008.10.1504/IJMIC.2008.021166
  5. CHAUMETTE F and HUTCHINSON S,”Visual servo control I: basic approaches,” IEEE Robotics and Automation Magazine, Vol.13, No.4, pp.82-90, 2006.10.1109/MRA.2006.250573
  6. Wu Defeng and Li Aiguo,”Error modeling and compensation approach for three-dimensional surface scanning robot,”Journal of Mechanical Engineering, Vol.48,No.13,pp.61-67, 2012.10.3901/JME.2012.13.061
  7. Peter BIBER, Henrik ANDREASSON, Tom DUCKETT and et al,”3D modeling of indoor environments by a mobile robot with a laser scanner and panoramic camera,”2004 IEEE/RSJ International Conference on Intelligent Robots and Systems(IROS), Sendai, Japan : IEEE,pp.3430-3435, April 2004.
  8. Biqiang Du , Ning Xi , and Erick Nieves,”Industrial robot calibration using a virtual linear constraint,” International Journal on Smart Sensing and Intelligent System, Vol.5,No.4, December 2012, pp. 987-1001.10.21307/ijssis-2017-519
  9. Ziegert J, Datseris p. “Basic Consideration for Robot Calibration,” IEEE International Conference on Robotics and Automation, Philadelphia, 1988, pp.932-938.
  10. You Wenjian,Liang Bing and Li Yinjun,”Reserch of output characteristic fitting of eddy-current sensor based on radial-basis function neural network,”Industry and Mine Automatic, Vol.39,No.2,pp.47-50, February 2013.
  11. MEHRABI S, MAGHSOUDLOO M, ARABALIBEIK H and et al,”Application of multilayer perceptron and radial basis function neural networks in differentiating between chronic obstructive pulmonary and congestive heart failure diseases,”Expert Systems with Applications,Vol.36, No.3, pp. 6956-6959, 2009.
  12. SENTH IL BRUMMAGEM M, RAOM V C and CHANDRAMOHAN A,”A new and improved version of particle swarm optimization algorithm with global-l local best parameters,”Knowledge and Information Systems, Vol.16, No.3, pp.15-26, 2008.10.1007/s10115-007-0109-z
  13. Mehdi Neshat, Mehdi Sargolzaei, Azra Masoumi and et al,”A new kind of PSO: predator particle swarm optimization,” International Journal on Smart Sensing and Intelligent System, Vol.5,No.2, June 2012, pp. 521-539.10.21307/ijssis-2017-493
  14. Joost Langeveld , Andries P. Engelbrecht,”Set-based particle swarm optimization applied to the multidimensional knapsack problem,” Swarm Intelligence,Vol.6,No.4,pp.297-342,2012.10.1007/s11721-012-0073-4
  15. B ERGH F and ENGELBRECHT A P,”A cooperative approach to particle swarm optimization,”IEEE Trans on Evolutionary Computation, Vol.8, No.3, pp.1-15, 2004.10.1109/TEVC.2004.826069
  16. DEL V, VENAYAGAMOORTHY G, MOHAGHEGHIS and et al, “Particle swarm optimization: Basic concepts, variants and applications in power system,”IEEE Transactions on Evolutionary Computation, Vol.12, No.2, pp.171-195, 2008.10.1109/TEVC.2007.896686
Language: English
Page range: 837 - 855
Submitted on: Nov 30, 2013
Accepted on: Jun 1, 2014
Published on: Dec 27, 2017
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year

© 2017 Jianhong Qi, Jinda Cai, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.