Model Identification And Controller Design For An Electropneumatic Actuator System With Dead Zone Compensation
References
- M. F. Rahmat, N. H Sunar, Sy Najib Sy Salim, Mastura Shafinaz Zainal Abidin, A. A Mohd Fauzi, and Z. H. Ismail, “Review on Modeling and Controller Design in Pneumatic Actuator Control System,” International Journal On Smart Sensing and Intelligent Systems, vol. 4, pp. pp 630-661, 2011.
- M.-C. Shih and S.-I. Tseng, “Identification and position control of a servo pneumatic cylinder,” Control Engineering Practice, vol. 3, pp. 1285-1290, 1995.
- S. Aziz and G. M. Bone, “Automatic tuning of an accurate position controller for pneumatic actuators,” in Intelligent Robots and Systems, 1998. Proceedings., 1998 IEEE/RSJ International Conference on, 1998, pp. 1782-1788 vol.3.
- W.K. Lai, M.F. Rahmat, and N. A. Wahab, “Modeling and Controller Design of Pneumatic Actuator System with Control Valve,” International Journal on Smart Sensing and Intelligent Systems, vol. 5, pp. 624-644, 2012.
- P. Chaewieang, K. Sirisantisamrit, and T. Thepmanee, “Pressure control of pneumaticpressure-load system using generalized predictive controller,” in Mechatronics and Automation, 2008. ICMA 2008. IEEE International Conference on, 2008, pp. 788-791.
- A. Saleem, S. Abdrabbo, and T. Tutunji, “On-line identification and control of pneumatic servo drives via a mixed-reality environment,” The International Journal of Advanced Manufacturing Technology, vol. 40, pp. 518-530, 2009.
- H. P. H. Anh and N. T. Nam, “Modeling and Adaptive Self-Tuning MVC Control of PAM Manipulator Using Online Observer Optimized with Modified Genetic Algorithm,” Engineering, vol. 3, p. 130, 2011.
- R. Ghazali, Y. M. Sam, M. F. Rahmat, Zulfatman, and A. W. I. M. Hashim., “Perfect Tracking Control with Discrete LQR for a Non-minimum Phase Electro-Hydraulic Actuator System,” International Journal On Smart Sensing and Intelligent Systems, vol. 4, pp. pp 424-439, 2011.
- M. Taleb, A. Levant, and F. Plestan, “Twisting algorithm adaptation for control of electropneumatic actuators,” in Variable Structure Systems (VSS), 2012 12th International Workshop on, 2012, pp. 178-183.
- C. Hong-Ming, C. Zi-Yi, and C. Ming-Cheng, “Implementation of an Integral Sliding Mode Controller for a Pneumatic Cylinder Position Servo Control System,” in Innovative Computing, Information and Control (ICICIC), 2009 Fourth International Conference on, 2009, pp. 552-555.
- A. Grigaitis and V. A. Gelezevicius, “Electropneumatic servo system with adaptive force controller,” in Power Electronics and Motion Control Conference, 2008. EPE-PEMC 2008. 13th, 2008, pp. 1144-1148.
- L. Chia-Hua and H. Yean-Ren, “A study on tracking position control of an pneumatic system by backstepping design,” in Control Automation Robotics & Vision (ICARCV), 2010 11th International Conference on, 2010, pp. 721-726.
- M. Smaoui, X. Brun, and D. Thomasset, “A study on tracking position control of an electropneumatic system using backstepping design,” Control Engineering Practice, vol. 14, pp. 923-933, 2006.
- H. M. L. Eng, “Control og a Pneumatic Servosystem Using Fuzzy Logic,” in Proc. of 1st FPNI-PhD Symp. Hamburg, 2000, pp. 189-201.
- S. Kaitwanidvilai and P. Olranthichachat, “Robust loop shaping-fuzzy gain scheduling control of a servo-pneumatic system using particle swarm optimization approach,” Mechatronics, 2010.
- G. Kothapalli and M. Y. Hassan, “Design of a neural network based intelligent PI controller for a pneumatic system,” IAENG International Journal of Computer Science, vol. 35, pp. 217-222, 2008.
- K. Ahn and B. Lee, “Intelligent switching control of pneumatic cylinders by learning vector quantization neural network,” Journal of Mechanical Science and Technology, vol. 19, pp. 529-539, 2005.
- R. B. Van Varseveld and G. M. Bone, “Accurate position control of a pneumatic actuator using on/off solenoid valves,” Mechatronics, IEEE/ASME Transactions on, vol. 2, pp. 195-204, 1997.
- M. Rahmat, S. N. S. Salim, N. Sunar, A. A. M. Faudzi, Z. Hilmi, and I. K. Huda, “Identification and non-linear control strategy for industrial pneumatic actuator,” International Journal of Physical Sciences, vol. 7, pp. 2565-2579, 2012.
- K. Tanaka, Y. Yamada, A. Shimizu, and S. Shibata, “Multi-rate adaptive pole-placement control for pneumatic servo system with additive external forces,” in Advanced Motion Control, 1996. AMC ‘96-MIE. Proceedings., 1996 4th International Workshop on, 1996, pp. 213-218 vol.1.
- R. Richardson, M. Brown, B. Bhakta, and M. Levesley, “Impedance control for a pneumatic robot-based around pole-placement, joint space controllers,” Control Engineering Practice, vol. 13, pp. 291-303, 2005.
- A. Kyoung Kwan and A. Ho Pham Huy, “System Identification and Self-Tuning Pole Placement Control of the Two-Axes Pneumatic Artificial Muscle Manipulator Optimized by Genetic Algorithm,” in Mechatronics and Automation, 2007. ICMA 2007. International Conference on, 2007, pp. 2604-2609.
- W. Bo, W. Tao, J. Ying, F. Wei, and W. Yu, “Study of pneumatic servo system based on linear active disturbance rejection controller,” in Advanced Intelligent Mechatronics (AIM), 2013 IEEE/ASME International Conference on, 2013, pp. 1170-1174.
- J. Micheal, M. F. Rahmat, N. Abdul Wahab, and W. K. Lai, “Feed Forward Linear Quadratic Controller Design for an Industrial Electro-Hydraulic Actuator System with Servo Valve,” International Journal On Smart Sensing and Intelligent Systems, vol. 6, pp. pp 154-170, 2011.
- C. Kaddissi, J. P. Kenne, and M. Saad, “Identification and Real-Time Control of an Electrohydraulic Servo System Based on Nonlinear Backstepping,” Mechatronics, IEEE/ASME Transactions on, vol. 12, pp. 12-22, 2007.
- R. Ghazali, Y. M. Sam, M. F. Rahmat, K. Jusoff, Zulfatman, and A. W. I. M. Hashim., “Self-Tuning Control of an Electro-Hydraulic Actuator,” International Journal On Smart Sensing and Intelligent Systems, vol. 4, pp. pp 189-204, 2011.
- X.-S. Wang, C.-Y. Su, and H. Hong, “Robust adaptive control of a class of nonlinear systems with unknown dead-zone,” Automatica, vol. 40, pp. 407-413, 2004.
- H. Chuxiong, Y. Bin, and W. Qingfeng, “Performance-Oriented Adaptive Robust Control of a Class of Nonlinear Systems Preceded by Unknown Dead Zone With Comparative Experimental Results,” Mechatronics, IEEE/ASME Transactions on, vol. 18, pp. 178-189, 2013.
- G. Sen Gupta, S. C. Mukhopadhyay, C. H. Messom, and S. N. Demidenko, “Master–Slave Control of a Teleoperated Anthropomorphic Robotic Arm With Gripping Force Sensing,” Instrumentation and Measurement, IEEE Transactions on, vol. 55, pp. 21362145, 2006.
- Sy Najib Sy Salim, M. F. Rahmat, A. A. M. Fauzi, N. H. Sunar, Z. H. Ismail, and S. I. Samsudin, “Tracking Performance and Distrubance Rejection of Pneumatic Actuator System,” in 9th Asian Control Conference Istanbul, Turkey, 2013.
DOI: https://doi.org/10.21307/ijssis-2017-682 | Journal eISSN: 1178-5608
Language: English
Page range: 798 - 819
Submitted on: Mar 5, 2014
Accepted on: Jun 1, 2014
Published on: Dec 27, 2017
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2017 N. H. Sunar, M. F. Rahmat, Zool Hilmi Ismail, Ahmad ‘Athif Mohd Faudzi, Sy Najib Sy Salim, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.