Have a personal or library account? Click to login

Hybrid Intelligent Method of Identifying Stator Resistance of Motorized Spindle

By:
Open Access
|Dec 2017

References

  1. Yusheng Zhang, “The Application of Electro-spindle on CNC Machine”, Mechanical Management and Development, vol.1, 2011, pp. 137-138.
  2. L P Wang, H G Zhang, X H Liu, “Robust sensorless of ADRC controlled PMSM based on MRAS with stator resistance identification”, Proc. CCC 2011, pp.3575-3579, China, July 22-24, 2011.
  3. Junling Zhu, Qing Tian, Zuobao Tian, “Simulation analysis on stator resistance identification based on fuzzy logic”, Computer Measurement & control, vol.20,No. 8 , 2012 ,pp.2230-2232.
  4. Kumar R, Gupta R A, Bansal A K, “Identification and control of PMSM using ANN”, Journal of the Institution of Engineering(India):Electrical Engineering Division, vol.90, 2009, pp.20-25.
  5. Foo Gilbert Hock Beng,Rahman M. F., “Direct torque control of an IPM-synchronous motor drive at very low speed using a sliding-mode stator flux observer”, IEEE Transactions on Power Electronics, vol.25,No. 4 , 2010, pp.933-942.10.1109/TPEL.2009.2036354
  6. Barut Murat, “Bi input-extended kalman filter based estimation technique for speedsensorless control of induction motors”, Energy Conversion and Management,vol.51,No. 10, 2010, pp. 2032-2040.10.1016/j.enconman.2010.02.037
  7. Soltani J., Abootorabi Zarchi H,Arab Markadeh Gh R, “Stator-flux-oriented based encoderless direct torque control for synchronous reluctance machines using sliding mode approach” , World Academy of Science, Engineering and Technology.vol.58 , 2009, pp.883-889.
  8. Dan Xiao, Foo Gilbert,Rahman M. F, “A new combined adaptive flux observer with HF signal injection for sensorless direct torque and flux control of matrix converter fed ipmsm over a wide speed range” , Proc. ECCE 2010,pp 1859-1866, United states, September 12-16,2010.10.1109/ECCE.2010.5618149
  9. Foo Gilbert,Rahman M F, “Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection”,IEEE Transactions on Industrial Electronics, vol.57,No.1,2010 , pp.395-403.10.1109/TIE.2009.2030815
  10. Abjadi Navid R, Markadeh Gholamreza Arab,Soltani Jafar, “Model following sliding-mode control of a six-phase induction motor drive” ,Journal of Power Electronics, vol.10,No. 6,2010, pp. 694-701.10.6113/JPE.2010.10.6.694
  11. Zidani F, Diallo D, Benbouzid M E H,Naït-Saïd R, “Direct torque control of induction motor with fuzzy stator resistance adaptation” ,IEEE Transactions on Energy Conversion, vol. 21, No. 2, 2006 ,pp.619-62110.1109/TEC.2006.874251
  12. Zaimeddine Rabah, Berkouk E Madjid,Refoufi Larbi, “Two approaches for direct torque control using a three-level voltage source inverter with real time estimation of an induction motors stator resistance” ,Mediterranean Journal of Measurement and Control, vol.3, No. 3, 2007 , pp.134-142.
  13. Sayouti Yassine, Abbou Ahmed, Akherraz Mohammed,Mahmoudi Hassane, “On-line neural network stator resistance estimation in direct torque controlled induction motor drive” ,Proc. ISDA 2009,pp 988-992, Italy, November 30 - December 2, 2009.10.1109/ISDA.2009.183
  14. Tlemcani Abdelhalim, Bouchhida Ouahid, Benmansour Khelifa, Boudana Djamell,Boucherit Mohamed Seghir, “Direct torque control strategy (DTC) based on fuzzy logic controller for a permanent magnet synchronous machine drive” ,Journal of Electrical Engineering and Technology, vol. 4, No. 1, 2009, pp.66-78.10.5370/JEET.2009.4.1.066
  15. Aktas Mustafa,Ibrahim Okumus H, “Stator resistance estimation using ANN in DTC IM drives” , Turkish Journal of Electrical Engineering and Computer Sciences , vol. 18, No. 2, 2010, pp.197-210.10.3906/elk-0812-6
  16. Draou Azeddine,Miloudi Abdellah, “A simplified speed controller for direct torque neuro fuzzy controlled induction machine drive based on a variable gain PI controller” , Proc. PEOCO 2010, pp 533-538, Malaysia, June 23-24, 2010.10.1109/PEOCO.2010.5559235
  17. Rong Guo, Hong sheng Tang, Ge Zhong xue, et. al, “Application of NNPLS analysis in QSDR studies”, Computers and Applied Chemistry, vol. 26, No. 12, 2009,pp.1553-1558.
  18. Rui hua Li, Guo xiang Meng, Heng kun Xie,etal, “A Hybrid Prediction Approach for Stator Insulation Breakdown Voltage of Large Generator Based on PLS Combined With Artificial Neural Network”, Zhongguo Dianji Gongcheng Xuebao, vol.27, No. 3,2007,pp.100-105.
  19. Abdul Rahim, H. Ibrahim, F. Taib, M.N. “System identification of nonlinear autoregressive models in monitoring dengue infection” ,International Journal on Smart Sensing and Intelligent Systems, vol.3,No.4 ,2010, pp.783-806.10.21307/ijssis-2017-421
  20. Dey, Debangshu,Munshi, Sugata, “Simulation studies on a new intelligent scheme for relative humidity and temperature measurement using thermistors in 555 timer circuit”, International Journal on Smart Sensing and Intelligent Systems, vol. 3,No. 2, 2010, pp.217-229.10.21307/ijssis-2017-389
  21. G. Sen Gupta, S.C. Mukhopadhyay, S. Demidenko and C.H. Messom, “Master-slave Control of a Teleoperated Anthropomorphic Robotic Arm with Gripping Force Sensing”, IEEE Transactions on Instrumentation and Measurement, Vol. 55, No. 6, pp. 2136-2145, December 2006.
  22. Xiao qiang Zhu, Guo qiang Li, Ling fang Sun, etal, “Analysis of Carbon in Coal-fired Based on Partial Least Squares Regression Algorithm”, Journal of Northeast Dianli University, vol.32,No.3, 2012, pp.31-35.
  23. S.C. Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, “Modeling and Control of a New Horizontal Shaft Hybrid Type Magnetic Bearing”, IEEE Transactions on Industrial Electronics, Vol. 47, No. 1, pp. 100-108, February 2000.10.1109/41.824131
  24. N Wang, J Xu, J Yang, “Method of identifying key quality characteristics in multistage manufacturing process based on PLSR”, Proc. ADME 2012, pp.2580-2584, China, August 16-18, 2012.
  25. S.C. Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, “Design, Analysis and Control of a New Repulsive Type Magnetic Bearing”, IEE proceeding on Electric Power Applications, vol. 146, no. 1, pp. 33-40, January 1999.10.1049/ip-epa:19990203
  26. Cheng yuan Wang, Jia kuan Xia, Jun youYang, “Modern control technology of motor”, Mechanical industry press, China,2006.
Language: English
Page range: 781 - 797
Submitted on: Jan 16, 2014
Accepted on: Jun 1, 2014
Published on: Dec 27, 2017
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year

© 2017 Lixiu Zhang, Yuhou Wu, Ke Zhang, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.