References
- Southwell R, Gough F, “The free transverse vibration of airscrew blade”, British A.R.C. Reports and Memoranda, Vol. 766, 1921.
- Nathan Rubinstein, James T. Stadter, "Bounds to bending frequencies of a rotating beam", Journal of the Franklin Institute, Vol. 294, 1972, pp.217-229.
- Putter S and Manor H. “Natural frequencies of radial rotating beams”, Journal of Sound andVibration, Vol. 56, 1978; pp. 175-185.
- S.V. Hoa , “Vibration of a rotating beam with tip mass”, Journal of Sound and Vibration, Vol. 72, 1979; pp. 369-381.
- S.V. Hoa, D.H. Hodges, M.J. Rutkowski, "Comments on "vibration of a rotating beam withtip mass"“, Journal of Sound and Vibration , Vol. 72,1980, pp.547-549.
- Kuo, Tzung, Hurng Wu, Sen Yung Lee, “Bending vibration of a rotating non-uniform beam with tip mass and an elastically retrained root”, Computers & Structures, Vol. 42,1992:pp.229-236
- T. Yokoyama, “Free vibration characteristics of rotating Timoshenko beams”, InternationalJournal of Mechanical Sciences, Vol. 30, 1988; pp.743-755
- H. H.Yoo, S. H.Shin, “Vibration analysis of rotating cantilever beams”, Journal of Sound andVibration , Vol. 212, 1998,pp.807-828.
- Shu, X., Liu, Y., Zhao, D, Gwandu, B., Floreani, F., Zhang, L.; Bennion, “Dependence of temperature and strain coefficients on fiber grating type and its application to simultaneous temperature and strain measurement”, Optics Leters, Vol. 27, 2002, pp.701-703.
- Guru Prasad, A.S.,“Measurement of stress-strain response of a rammed earth prism in compression using fiber bragg grating sensors”. International Journal on Smart Sensing and Intelligent Systems, September 2011, pp 376-387,
- S. Bhalla , Y.W. Yang , J. Zhao, C.K. Soh. “Structural health monitoring of underground facilities-Technological issues and challenges”, Tunnelling and Underground Space Technology, Vol. 20, 2005, pp.487-500
- Kyungmok Kim, Jong Min Lee, Yoha Hwang, “Determination of engineering strain distribution in a rotor blade with fibre Bragg grating array and a rotary optic coupler” Optics and Lasers in Engineering, Vol. 46, 2008, pp.758-762.
- Chen-Jung Li and A. GalipUlsoy, “High-Precission Measurement Of Tool-Tip Displacement Using Strain Gauges In Precision Flexible Line Boring”, Mechanical Systems and Signal Processing, Vol. 13(4), 1999, pp.531-546
- G. Pavic, “Measurement of vibrations by strain gauges, Part I: theoretical basis”, Journal of Sound and vibration, Vol. 102, 1985, pp.153~163.