References
- Boban D. Nikolic, Breda Kegl, Sasa D. Markovic and Melanija S. Mitrovic.“Determining the Speed of Sound, Density and Bulk Modulus of Rapeseed Oil, Biodiesel and Diesel Fuel”. Thermal Science, 2012, Vol. 16, Suppl. 2, pp. S569-S579.
- Qaisar Hayat, Fan Li-Yun, Xiu-Zhen Ma and TianBingqi.“Comparative Study of Pressure Wave Mathematical Models for HP Fuel Pipeline of CEUP at Various Operating Conditions”. International Journal on Smart Sensing and Intelligent Systems, 2013, Vol. 6, No. 3, pp. 10771101.
- Liyun Fan, BingqiTian, Chong Yao, Wenhui Li and Xiuzhen Ma.“A Study on Cycle Fuel Injection Quantity Variation for a Diesel Engine Combination Electronic Unit Pump System”. Journal of Power and Energy, Proceedings of the Institute of Mechanical Engineers Part A, 2012, Vol 226, Issue: 5 (2012) pp. 712-723.
- Fan L. and Long W., Zhu Y. and Xue Y. “A Characteristic Study of Electronic In-line Pump System for Diesel Engines”. SAE Paper 2008-01-0943, 2008.
- Liyun F., Yuanxian Z., Xiuzhen Ma, Bingqi T., Song E. and Li W. “Quantitative Analysis on Cycle Fuel Injection Quantity Fluctuation of Diesel Engine Electronic In-line Pump System”. 2010, SAE Paper 2010-01-0875.
- Jen-Hao Liu, Yu-Fan Chen, Tzu-Shiang Lin, Chia-Pang Chen, Po-Tang Chen, Tzai-Hung Wen, Chih-Hong Sun, Jehn-YihJuang and Joe-Air Jiang. “An Air Quality Monitoring System for Urban Areas Based on the Technology of Wireless Sensor Networks”. International Journal of Smart Sensing and Intelligent Systems, 2012, Vol 5, No. 1, pp. 191-214.
- Andre’ L. Boehman, David Morris and James Szybist. “The Impact of the Bulk Modulus of Diesel Fuels on Fuel Injection Timing”. Energy& Fuels, 2004, 18, pp. 1877-1882.
- Kegl B., Hribernik A., Experimental analysis of injection characteristics using biodiesel fuel, Energy Fuels, 2006, 20, pp.2239–2248.
- FlavioCaresana, Impact of biodiesel bulk modulus on injection pressure and injection timing. The effect of residual pressure. Fuel, 2011, 90, pp.477–485.
- MarzenaDzida and PiotrPrusakiewicz.“Theeffect of temperature and pressure on the physicochemical properties of petroleum diesel oil and biodiesel fuel”. Fuel, 2008, 87, pp.19411948.
- Mustafa E. Tat and Jon H. Van Gerpen. “Effect of Temperature and Pressure on the Speed of Sound and Isentropic Bulk Modulus of Mixtures of Biodiesel and Diesel Fuel”. Journal of American Oil Chemists’ Society, 2003, Vol. 80, No. 11, pp.1127-1130.
- Wang Jun-Xiao, Lu Jia-Xiang, Zhang Jin-Yang and Zhang Xi-Chao.“Study on Several Experiential Formulas Used in Simulated Calculation of Fuel Injection Process in Diesel Engines”. Vehicle Engine, 2001, Vol.5, No. 135, pp.6-11.
- Kristina Ahlin. “Modelling of Pressure Waves in the Common Rail Diesel Injection System”. Dissertation 2000.
- Reinhold Ludwig and Peter L. Levin. “Analytical and Numerical Treatment of Pulsed Wave Propagation into a Viscous Fluid”. IEEE Trans. On Ultrasonics, Ferroelectic and Frequency Control, 1995, Vol.42, No.4, pp. 789-792.
- P. M. Jordan, Martin R. Meyer and Ashok Puri. “Causal implications of viscous damping in compressible fluid flows”. The American Physical Society, Physical Review E, 2000, Vol. 62, No. 6, pp. 7918 – 7926.
- OudinaAssia and Djelouah Hakim.“Propagation of Ultrasonic Waves in Viscous Fluids”. Wave Propagation in Materials for Modern Applications.AndreyPetrin (Ed.) 2010, ISBN: 978953-7619-65-7, InTech.
- KISTLER Model 4067 Piezoresistive Pressure Sensor. www.kistler.com/us/en/product/pressure/40673000A0
- Jan Herrmann, JurgenKoreck, Matthias Maess, Lothar Gaul and Otto von Estorff.Frequency-dependent damping model for the hydroacoustic finite element analysis of fluid-filled pipes with diameter changes.Mechanical Systems and Signal Processing, 2011, Vol 25, No. 3, pp. 981-990.
- D. N. Moriasi, J. G. Arnold, M. W. Van Liew, R. L. Bingner, R. D. Harmel and T. L. Veith. “Model Evaluation Guidelines for Systematic Quantification of Accuracy In Watershed Simulations”. Transactions of the ASABE, 2007, Vol 50, No. 3, pp. 885-900.