References
- Raghavan, A. and Cesnik, C. E., “Review of guided-wave structural health monitoring”, The Shock and Vibration Digest., Vol. 39, No. 2, pp. 91–114, 2007.
- Banerjee, S., Ricci, F., Shih, F. and Mal, A. K., “Structural health monitoring using ultrasonic guided waves”, In Advanced ultrasonic methods for material and structure inspection, T. Kundu (Editor), ISTE, London, U.K. and Newport Beach, CA, USA, Chapter 2, pp. 43-88, 2007.
- Chen, J., Su, Z. and Cheng, L., “Identification of corrosion damage in submerged structures using fundamental anti-symmetric Lamb waves”, Smart Materials and Structures, Vol. 19, 015004 (12pp), 2010.
- Lingyu, Y. and Cara, A.C.L., “Lamb wave–based quantitative crack detection using a focusing array algorithm”, Journal of Intelligent Material Systems and Structures, Vol. 24, No. 9, pp. 1138–1152, 2012.
- Park, H. W., Sohn, H., Kincho, H. L. and Farrar, C. R., “Time reversal active sensing for health monitoring of a composite plate”, Journal of Sound and Vibration., Vol. 302, pp. 50– 66, 2007.
- Ramadas, C., Balasubramaniam, K., Joshi, M. and Krishnamurthy, C.V., “Detection of transverse cracks in a composite beam using combined features of Lamb wave and vibration techniques in ANN environment”, International Journal on Smart Sensing and Intelligent Systems, Vol.1, No. 4, pp. 970-984, 2008.
- Gangadharan, R. , Murthy, C.R.L., Gopalakrishnan, S., Bhat, M. R. and Roy Mahapatra, D., “Characterization of cracks and delaminations using PWAS Lamb waves based timefrequency methods”, International Journal on Smart Sensing and Intelligent Systems, Vol. 3, No. 4, pp. 703-735, 2010.
- Ben, B.S., Ben, B.A., Vikram, K.A. and Yang, S.H., “Damage identification in composite materials using ultrasonic based Lamb wave method”, Measurement, Vol. 46, No. 2, pp. 904–912, 2013.
- Giurgiutiu, V., Zagrai, A. and Bao, J. J., “Piezoelectric wafer embedded active sensors for aging aircraft structural health monitoring”, Structural Health Monitoring, Vol. 1, No. 1, pp. 41–61, 2002.
- Lin, M., Qing, X., Kumar, A. and Beard, S. J., “SMART layer and SMART suitcase for structural health monitoring applications”, Proceedings of SPIE: Smart Structures and Materials, Vol. 4332, pp. 98–106, 2001.
- Park, J. and Chang, F. K., “Built-in detection of impact damage in multi-layered thick composite structures”, In Proceedings of the 4th International Workshop on Structural Health Monitoring, F.K. Chang (Editor), DEStech, Lancaster, pp. 1391-1398, 2003,
- Banerjee, S., Ricci, F., Monaco, E. and Mal, A. K., “A wave propagation and vibrationbased approach for damage identification in structural components”, Journal of Sound and Vibration., Vol. 332, No. 1-2, pp. 167-183, 2009
- Monnier, T., “Lamb waves-based impact damage monitoring of a stiffened aircraft panel using piezo-electric transducers”, Journal of Intelligent Materials Systems and Structures, Vol. 17, No. 5, pp. 411–421, 2006.
- Wang, L. and Yuan, F.G., “Active damage localization technique based on energy propagation of Lamb waves”, Smart Structures and Systems., Vol. 3, No. 2, pp. 201-207, 2007.
- Nag, C. T. and Veidt, M., “A Lamb-wave based technique for damage detection in composite”, Smart Materials and Structures, Vol. 18, 074006 (12pp), 2009.
- Lu, Y. and Michaels, J. E., “A methodology for structural health monitoring with diffuse ultrasonic waves in the presence of temperature variations”, Ultrasonics, Vol. 43, No. 9, pp. 717– 731, 2005.
- Croxford, A. J., Wilcox, P. D., Konstantinidis, G. and B. W. Drinkwater, B. W., “Strategies for overcoming the effect of temperature on guided wave structural health monitoring”, Proceedings of SPIE: Health Monitoring of Structural and Biological Systems, Vol. 6532, p. 65321T, 2007.
- Sohn, H., “Effects of environmental and operational variability on structural health monitoring”, Philosophical Transactions of The. Royal Society of A., Vol. 365, pp 365539, 2007.
- Fink, M., “Time reversal of ultrasonic fields, part I: Basic principles”, IEEE Transactions. on Ultrasonics., Ferroelectrics and Frequency Control., Vol. 39, No. 5, pp. 555–566, 1992a.
- Fink, M., “Time reversal of ultrasonic fields, part II: Basic principles”, IEEE Transactions. on Ultrasonics., Ferroelectrics and Frequency Control., Vol. 39, No. 5, pp. 567–578, 1992b.
- Anton, S. R., Inman, D. J. and Park, G., “Reference-free damage detection using instantaneous baseline measurements”, The American Institute of Aeronautics and Astronautics Journal, Vo. 47, No. 8, 2009.
- Giurgiutiu, V. and Cuc, A., “Embedded non-destructive evaluation for structural health monitoring, damage detection, and failure prevention”, The Shock and Vibration Digest, Vol. 37, No. 2, pp. 83-105, 2005.
- Sundararaman, S., Adams, D. E. and Rigas, E.J., “Structural damage identification in homogeneous and heterogeneous structures using beamforming”, Structural Health Monitoring, Vol. 4, No. 2, pp. 171–190, 2005.
- Malinowski, P., Wandowski, T., Trendalova. I. and Ostachowicz, W., “A phased arraybased method for damage detection and localization in thin plates”, Structural Health Monitoring, Vol. 8, No. 1, pp. 5–15, 2005.
- Wilcox, P. D., “Omnidirectional guided wave transducer arrays for the rapid inspection of large areas of plate structures”, IEEE Transactions. on Ultrasonics., Ferroelectrics and Frequency Control, Vol. 50, No. 6, pp. 699–709, 2003.
- Rajagopalan, J., Balasubramaniam, K. and Krishnamurthy, C. V., “A single transmitter multi-receiver (STMR) PZT array for guided ultrasonic wave based structural health monitoring of large isotropic plate structures”, Smart Materials and Structures., Vol. 15, No. 5, 1190–1196, 2006.
- Kudela, P., Ostachowicz, W. and Zak, A., “Damage detection in composite plates With embedded PZT transducers”, Mechanical Systems Signal Processing., Vol. 22, No. 6, pp. 1327–1335, 2008.
- Rathod, V. T. and Mahapatra, D. R., “Lamb waves based monitoring of plate-stiffener debonding using a circular array of piezoelectric sensors”, International Journal on Smart Sensing and Intelligent Systems, Vol. 3, No. 1, pp. 27-44, 2010.
- Bartoli, I., Scalea, F. L. D., Fateh, M. and Viola, E., “ Modeling guided wave propagation with application to the long-range defect detection in railroad tracks”, NDT&E International, Vol. 38, pp. 325– 334, 2005.
- Siqueira, M. H. S., Gatts, C. E. N., da Silva, R. R. and Rebello, J. M. A., “The use of ultrasonic guided waves and wavelets analysis in pipe inspection”, Ultrasonics, Vol. 41, pp. 785–797, 2004.
- Suzuki, H., Kinjo, T., Hayashi, Y., Takemoto, M. and K. Ono, K., “Wavelet transform of acoustic Emission Signals”, Journal of Acoustic Emission., Vol. 14, No. 2, pp. 69-84, 1996.
- Hamstad, M. A., A’OGallaghar and Gary, J., “A wavelet transformation applied to acoustic emission signals: Part 1: Source Identification”, Journal of Acoustic Emission., Vol. 20, pp. 39-61, 2002.
- Rose, J. L., “Ultrasonic waves in solid media”, Cambridge University Press, 1999.
- Banerjee, S., Prosser, W. H. and Mal, A. K., “Calculation of the response of a composite plate localized dynamic surface loads using a new wavenumber integral method”, ASME Journal of Applied Mechanics., Vol. 72, No. 1, 18-24, 2005.
- LSTC, LS-DYNA Keyword User’s Manual, Volume 1, Version 971, Livermore Software Technology Corporation (LSTC), 2007.