A Wsn-Based On-Line Working Condition Monitoring System For Large Electrical Equipment
By:
References
- H. C. Lin, “Intelligent Neural Network-Based Fast Power System Harmonic Detection,” IEEE Trans. on Industrial Electronics, vol. 54, no. 1, 2007, pp. 43-52.
- H.Su, K.T. Chong, “Induction Machine Condition Monitoring Using Neural Network Modeling,” IEEE Trans. on Industrial Electronics, vol. 54, no. 1, 2007, pp. 241-249.
- M. Blodt, D. Bonacci, J. Regnier, M. Chabert, J. Faucher, “On-Line Monitoring of Mechanical Faults in Variable-Speed Induction Motor Drives Using the Wigner Distribution,” IEEE Trans. on Industrial Electronics, vol. 55, no. 2, 2008, pp. 522-533.
- A.M.Gaouda et al.,”On-Line Detection and Measurement of Partial Discharge Signals in a Noisy Environment,” IEEE Trans. on Dielectrics and Electrical Insulation, vol. 15, no. 4, 2008, pp.1162-1173.
- J. Yick, B. Mukherjee, D. Ghosal,”Wireless sensor network survey”, Computer networks,vol.52,2008,pp.2292-2330.
- X. Cao, J. Chen, Y. Zhang, Y. Sun,”Development of an integrated wireless sensor network micro-environmental monitoring system”, ISA Transactions,vol.47,no.3,2008,pp.247-255.
- G. Anastasia, M. Contib, M. Di Francescoa, A. Passarellab,”Energy conservation in wireless sensor networks: A survey”, Ad Hoc Networks, vol.7, no.3, 2009, pp.537-568.
- J. Wu, S. Yuan, S. Ji, G. Zhou, Y. Wang, Z. Wang,”Multi-agent system design and evaluation for collaborative wireless sensor network in large structure health monitoring”, Expert Systems with Applications,vol.37,no.3, 2010,pp.2028-2036.
- Y. Liu, K. Liu, M. li,”Passive diagnosis for wireless sensor networks”, IEEE/ACM Transactions on Networking, vol.18, no.4, 2010, pp. 1132-1144.
- A. Ghose, J. Grobklags and J. Chuang. “Resilient data-centricstorage in wireless ad-hoc sensor networks”, in Porceedings of the 4th International Conference on Mobile Data Management (MDM03), pp.45-62, 2003.
- J. Hill, “System Architecture for Wireless Sensor Networks,” USA: University of California, Berkeley,CA, 2003.
- X. Zhuang, Y. Yang and W. Ding, “The wireless sensor network node design for electrical equipment on-line monitoring”, in Proc. Int. Conf. Industrial Technology, Chengdu, China, April 2008, pp. 1-4.
- Yongming Yang, Xuejun Chen, Xiong Zhuang,Wei Ding, “A WSN-based Large Electrical Equipment On-line Monitoring System”, in Proc. Int. Conf. Industrial Electronics and Applications, Taichung, China, June 2010, pp. 1849-1854.
- Yu Haibin et al, “Intelligent Wireless Sensor Networks,” Beijing, Science Publishing Company, pp. 286-292, 2006.
- Long Yang, Shi Po et al, “Perl5 Practical Programming,” Beijing, China, Water Power Press, 2001.
- IAR Systems. (December 2004). IAR Embedded Workbench IDE User Guide.
- X. Zhuang,Y. Yang and D. Wei, “A TDMA-based Protocol and Implementation for Avoiding Inter-Cluster Interference of Wireless Sensor Network”, in Proc. Int. Conf. Industrial Technology, Gippsland, Australia, February 2009, pp. 1-6.
- S. Ganeriwal, R. Kumar and Mani B. Srivastava., “Timing-sync protocol for sensor networks,” in Proc. Int. Conf. Embedded Networked Sensor Systems, Los Angeles, America, November 2003, pp. 138-149.
- C. Wang and R.X. Gao: “A virtual instrumentation system for integrated bearing condition monitoring”, Instrumentation and Measurement, IEEE Transactions on, Vol.49, No.2, 2000, pp. 325 – 332.
- National Instruments Corporation. LabVIEW Advanced: Performance & Communication Course Manual. National Instruments Corporation, USA, 2001.
- X. Chen, H. Tao, Y. Gao, C. Yu,”Study on the On-line Monitor System of Stator Bar of Generator”,Piezoelectectrics Acoustooptics, vol.29,no.6,2007, pp.749-754.
- X. Zhuang,Y. Yang and D. Wei, “A TDMA-based Protocol and Implementation for Avoiding Inter-Cluster Interference of Wireless Sensor Network”, in Proc. Int. Conf. Industrial Technology, Gippsland, Australia, February 2009, pp. 1-6.
- Handy MJ, Haase M and Timmermann D, “Low energy adaptive clustering hierarchy with deterministic cluster-head selection”, in Proc. Int. Conf. Mobile and Wireless Communications Networks, Stockholm, Sweden, Sept. 2002, pp. 368-372.
- IEEE Power Engineering Society: “A IEEE standard test procedure for polyphase induction motors and generators”, Revision of IEEE Std 112-1996 (1997).
DOI: https://doi.org/10.21307/ijssis-2017-541 | Journal eISSN: 1178-5608
Language: English
Page range: 297 - 316
Submitted on: Oct 8, 2012
Accepted on: Jan 21, 2013
Published on: Feb 20, 2013
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2013 Xuejun Chen, Yongming Yang, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.