Theory and Technology of The Single-Probe Two-Step Method to Separate Error
By:
References
- Yasuo Aoki and Ozono Shigeo, “Research of Three-point Method Roundness Error measurement “, Precise machinery, Vol. 32, No. 12, pp. 27-32. December 1966
- R.R. Donaldson, “A simple method for separation spindle error from test ball roundness”, CIRP Annals, Vol.21, No. 2, pp. 125–126. July 1972
- D.J. Whitehouse, “Some theoretical aspects of error separation techniques in surface metrology”, J. Physics. E: Scien. Instru., Vol. 9, No. 7, pp. 531-536. July 1976
- G. X. Zhang and R. K. Wang, “Four-point Method of Roundness and Spindle error Measurement”, CIRP Annals, Vol. 42, No. 1, pp. 593-596, March 1993.
- X. S. Zhu, B. Y. Xue, J. Y. Bei, “Interrelation and Application between Discrete Fourier Transform and Plural-real Fourier Transform”, Journal of Shanghai Jiaotong University, Vol. 22, No. 4, pp. 1-12, April 1988.
- E. W.Tyler, C. J. Evans and L.Z. Shao, “Uncertainly estimation for multiposition form error metrology”, Prec. Eng., Vol. 21-2, No.3, pp. 72-82, March 1997
- W. Gao, S. Kiyono, and E.Satoh, “Precision measurement of multi-degree-of-freedom spindle errors using two-dimensional slope sensors”, Annals of CIRP, Vol. 52, No.2, pp. 447-452, July 2002.
- T, Ruedi and S. A Juerg, “Primary roundness measuring machine”, Recent Developments in Traceable Dimensional Measurements III, Vol. 2, pp. 1315-1321, 2005
- Maisheng Hong, Zhonghuang Deng, Jianqiang Chen, et al. “Accurate time domain three point method for error separation of roundness”, Journal of Shanghai Jiaotong University, Vol. 34, No.10, pp. 1317-1319, October 2000.
- Qi Wu, Hongbin Liu and Dejin Hu, “On-site measurement of roundness error based on error separation technique”, China Mechanical Engineering, Vol. 8, No.17, pp.120-123, August 2006
- Xunsheng Zhu, Guoliang Liu, Guoshong Li, et al.”A study of the theory for cylindricity and accuracy of rotational motion and straight motion error”, Journal of Shanghai Jiaotong University, Vol. 26, No.4, pp.8-13, April 1992
- Xunsheng Zhu, Dehui Pan, Bingyuan Xue, et al, “Two necessary conditions of the validity of the measured data for three-point EST and their applications”, Chinese Science Bulletin, No.13, pp.79-80, July1986
- Xunsheng Zhu, Bingyuan Xue, Jiyao Bei, “Definition of error motion of rotational spindle and separation of mandrel eccentricity and tilt”, Chinese Science Bulletin, No.23, pp.1830-1833, November 1989
- Yinbiao Guo, Jiang Guo, Xiao-long Ke, Yong-lu Zhu, “System Error Separation and Revision for Aspheric Lens On-Machine Measurement”, Nanotechnology and Precision Engineering, Vol.8, No.5, pp.686-693, May 2010
- Liang Yang, Xue-dong Jing, Kai He, “Embedded Roundness and Cylindricity Error Measuring Instruments”, Instrument Technique and Sensor, No.3, pp.101-103, March 2011.
- W. Gao, S. Kiyono and E. Satoh, “Precision measurement of multi-degree–of -freedom spindle errors using two-dimensional slope sensors”, Annals of CIRP, Vol. 52, No. 2, pp. 447452, March 2002.
- O. Kamigaki, Y. Yamakawa, “Roundness measurement and its uncertainty in an international comparison”, Proc. of IMEKO 2000, Oxford: Elsevier Science Ltd Oxford, Vol. 139-144, 2000.
- Lei Zhang, Ying Zhao and Yu Zhang, “Theory and Experiment of Three-probe Error Separation Technique”, Journal of Mechanical Engineering, Vol. 45, No.6, pp. 256-261, June 2009.
- L. Zhang, Y. Zhang and L. Ba, “Conditions of Precision Measurement for Error Separation by Multi-probe Method”, Advanced Materials Research, Vol. 24-25, pp. 315-320, September 2007.
- L. Zhang, X. M. Yang, L. Ba and Y. Zhang, “Parameter Selection Rules for Error Separation by Multi-probe Method”, Advanced Materials Research. Vol. 53-54, pp. 421-427, October 2008.
- Maisheng Hong, Ping Cain, “Analysis and Comparison of Multi-Step Error Separation Technique”, Journal of Shanghai Jiaotong University, Vol. 38, No. 6, pp. 877-881, June 2004.
- Lei Zhang, Xiumin Yang, Ming Hu, Lin Ba, and Dongrong Zheng, “Theoretical Studies and Simulation Analysis of the Time Domain Non-Symmetrical ConFigureuration Two-Probe Method for Roundness Error Separation”, Advanced Science Letters, Vol.4, No.4-5, pp.1729– 1734, September 2011
- Bangcheng Zhang, Xiaohong Yang, Di Wu, et al. “The application of two points method in the measurement of crankshaft roundness error”, Modern Manufacturing Engineering, No.6, pp. 75-77, June 2005
- Yu Zhang and Wenmin Li, “Measurement of roundness error by least squares mean circle method”, Machinery Industry Standardization, No.5, pp.3-5, May 1982
DOI: https://doi.org/10.21307/ijssis-2017-540 | Journal eISSN: 1178-5608
Language: English
Page range: 278 - 296
Submitted on: Oct 2, 2012
Accepted on: Jan 16, 2013
Published on: Feb 20, 2013
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2013 Lei Zhang, Tong Li, Jian Ding, Xiumin Yang, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.