References
- [1]W. Gopel, K.D. Schierbaum, “SnO2 sensors: current status and future prospects”, Sensors and Actuators B: Chemical, Vol. 26, 1995, pp. 1–12.10.1016/0925-4005(94)01546-T
- [2]H. Baltruschat, I. Kamphausen, R. Oelgeklaus, J. Rose, M. Wahlkamp, “Detection of volatile organic solvents using potentiodynamic gas sensors”, Analytical Chemistry, Vol. 69, No. 4, 1997, pp. 743–748.10.1021/ac9605410
- [3]D.E. Williams, “Semiconducting oxides as gas-sensitive resistors”, Sensors and Actuators B: Chemical, Vol. 57, No.1, 1999, pp.1–16.10.1016/S0925-4005(99)00133-1
- [4]K. Potje-Kamloth, “Semiconductor junction gas sensors”, Chemical Reviews, Vol. 108, No. 2, 2008, pp. 367–399.10.1021/cr0681086
- [5]L. Liu, T. Zhang, L.Y.Wang, S.C. Li, “Improved ethanol sensing properties of Cu-doped SnO2 nanofibers”, Materials Letter, Vol. 63, No. 23, 2009, pp. 2041–2043.10.1016/j.matlet.2009.06.048
- [6]Y. Wang, W.Z. Jia, T. Strout, A. Schempf, H. Zhang, B.K. Li, J.H. Cui, Y. Lei, “Ammonia gas sensor using polypyrrole-coated TiO2/ZnO nanofibers”, Electroanalysis, Vol. 21, No. 12, 2009, pp. 1432–1438.10.1002/elan.200904584
- [7]A. K. Prasad, P.I. Gouma, “MoO3 and WO3 based thin film conductimetric sensors for automotive applications”, J. Mater. Sci., Vol. 38, No. 21, 2003, pp. 4347–4352.10.1023/A:1026339216910
- [8]S.S. Sunu, E. Prabhu, V. Jayaraman, K.I. Gnanasekar, T.K. Seshagiri, T. Gnanasekaran, “Electrical conductivity and gas sensing properties of MoO3”, Sens. Actuators B, Vol. 101, No. 1, 2004, pp. 161–174.10.1016/j.snb.2004.02.048
- [9]M. Ferroni, V. Guidi, G. Martinelli, M. Sacerdoti, P. Nelli, G. Sberveglieri, “MoO3- based sputtered thin films for fast NO2 detection”, Sens. Actuators B, Vol. 48, 1, 1998, pp. 285– 288.10.1016/S0925-4005(98)00057-4
- [10]S.S. Sunu, E. Prabhu, V. Jayaraman, K.I. Gnanasekar, T. Gnanasekaran, “Gas sensing properties of PLD made MoO3 films”, Sens. Actuators B, Vol. 94, 2, 2003, pp. 189–196.10.1016/S0925-4005(03)00342-3
- [11]D.B. Dadyburjor, S.S. Jewur, E. Ruckenstein, “Selective oxidation of hydrocarbons on composite oxides”, Catal. Rev. Sci. Eng., Vol. 19, No. 2, 1979, pp. 293–350.10.1080/03602457908068057
- [12]M.A. Larrubia, G. Ramis, G. Busca, “An FT-IR study of the adsorption of urea and ammonia over V2O5-MoO3-TiO2 SCR catalysts”, Appl. Catal. B, Vol. 27, No. 3, 2000, pp. L145– L151.10.1016/S0926-3373(00)00150-8
- [13]C. Imawan, H. Steffes, F. Solzbacher, E. Obermeier, “A new preparation method for sputtered MoO3 multilayers for the application in gas sensors”, Sens. Actuators B: Chem., Vol. 78, 1, 2001, pp. 119–125.10.1016/S0925-4005(01)00801-2
- [14]M. Ferroni, V. Guidi, G. Martinelli, P. Nelli, M. Sacerdoti, G. Sberveglieri, “Characterization of a molybdenum oxide sputtered thin film as a gas sensor”, Thin Solid Films, Vol. 307, No. 1, 1997, pp. 148–151.10.1016/S0040-6090(97)00279-4
- [15]C. Imawan, F. Solzbacher, H. Steffes, E. Obermeier, “Gas-sensing characteristics of modified-MoO3 thin films using Ti-overlayers for NH3 gas sensors”, Sens. Actuators B: Chem., Vol. 64, No. 1, 2000, pp. 193–197.10.1016/S0925-4005(99)00506-7
- [16]C. Imawan, H. Steffes, F. Solzbacher, E. Obermeier, “Structural and gas-sensing properties of V2O5–MoO3 thin films for H2 detection”, Sens. Actuators B: Chem., Vol. 77, No. 1, 2001 pp. 346–351.10.1016/S0925-4005(01)00732-8
- [17]K. Galatsis, Y. Li, W. Wlodarski, C. Cantalini, M. Passacantando, S. Santucci, “MoO3,WO3 single and binary oxide prepared by sol–gel method for gas sensing applications”, J. Sol–Gel Sci. Technol., Vol. 26, No. 1, 2003, pp. 1097–1101.10.1023/A:1020710808151
- [18]J. Zhou, S.Z. Deng, N.S. Xu, J. Chen, J.C. She, “Synthesis and fieldemission properties of aligned MoO3 nanowires”, Appl. Phys. Lett., Vol. 83, No. 13, 2003, pp. 2653–2655.10.1063/1.1613992
- [19]A.K. Prasad, P.I. Gouma, D.J. Kubinski, J.H. Visser, R.E. Soltis, P.J. Schmitz, “Reactively sputtered MoO3 films for ammonia sensing”, Thin Solid Films, Vol. 436, No. 1, 2003 pp. 46– 51.10.1016/S0040-6090(03)00524-8
- [20]A.K. Prasad, D.J. Kubinski, P.I. Gouma, “Comparison of sol–gel and ion beam deposited MoO3 thin film gas sensors for selective ammonia detection”, Sens. Actuators B: Chem., Vol. 93, No. 1, 2003, pp. 25–30.10.1016/S0925-4005(03)00336-8
- [21]A. Bouzidi, N. Benramdane, H. Tabet-Derranz, C. Mathieu, B. Khelifa, R. Desfeux, “Effect of substrate temperature on the structural and optical properties of MoO3 thin films prepared by spray pyrolysis technique”, Mater. Sci. Eng. B, Vol. 97, No. 1, 2003, pp. 5–8.10.1016/S0921-5107(02)00385-9
- [22]K.A. Gesheva, T. Ivanova, “A low-temperature atmospheric pressure CVD process for growing thin films of MoO3 and MoO3–WO3 for electrochromic device applications”, Chem. Vap. Deposit., Vol. 12, No. 4, 2006, pp. 231–238.10.1002/cvde.200506404
- [23]R.S. Patil, M.D. Uplane, P.S. Patil, “Structural and optical properties of electrodeposited molybdenum oxide thin films”, Appl. Surf. Sci., Vol. 252, No. 23, 2006, pp. 8050–8056.10.1016/j.apsusc.2005.10.016
- [24]JCPDS data card no. 05-0506.
- [25]S. Ashraf, C.S. Blackman, G. Hyett, I.P. Parkin, “Aerosol assisted chemical vapour deposition of MoO3 and MoO2 thin films on glass from molybdenum polyoxometallate precursors; thermophoresis and gas phase nanoparticle formation”, J. Mater. Chem., Vol. 16, No. 35, 2006, pp. 3575– 3582.10.1039/b607335b
- [26]B. D. Cullity, Elements of X-ray diffraction, Addison-Wesley Publishing Co., 1956.
- [27]R. S. Patil, M.D. Uplane, P. S. Patil, “Electrosynthesis of Electrochromic Molybdenum Oxide Thin Films with Rod-Like Features”, Int. J. Electrochem. Sci., Vol. 3, 2008, pp. 259 – 265.
- [28]G. E. Patil D. D. Kajale, P. T. Ahire, D. N. Chavan, N. K. Pawar, S. D. Shinde, V. B. Gaikwad, G. H. Jain, “Synthesis, characterization and gas sensing performance of SnO2 thin films prepared by spray pyrolysis”, Bulletin of Material Science Vol. 34, No. 1, 2011, pp.1–9.10.1007/s12034-011-0045-0
- [29]G. E Patil, D. D. Kajale, V. B. Gaikwad and G. H. Jain, “Nanocrystalline Tin Oxide Thin Film as a Low Level H2S Gas Sensor” International Journal of Nanoscience, Vol. 10, No. 4, 2011, pp. 1-5.10.1142/S0219581X11009398
- [30]G. H. Jain and L. A. Patil, “CuO-doped BSST thick film resistors for ppb level H2S gas sensing at room temperature”, Sensors and Actuators B, Vol. 123, 2007, pp. 246-253.10.1016/j.snb.2006.08.026
- [31]Franke, M.E., Koplin, T.J., Simon, U., “Metal and metal oxide nanoparticles inchemiresistors: does the nanoscale matter?”, Small Vol. 2, 2006, p.36–50.10.1002/smll.20050026117193551
- [32]Rothschild A., Komem, Y., “The effect of grain size on the sensitivity of nanocrystalline metal-oxide gas sensors”, Journal of Applied Physics, Vol. 95, 2004, pp. 6374–6380.10.1063/1.1728314
- [33]G. E. Patil, G. H. Jain, “Nanocrystalline CdSnO3 thin film as highly sensitive ethanol sensor”, Proceedings of 5th International Conference on Sensing Technology, ICST 2011, (2011), Article Number: 1569476109, pp. 260-263.