[1]M. Kleitz, E. Siebert, P. Fabry, J. Fouletier, “Solid state electrochemical sensors, in Sensors a comprehensive survey,” Eds. W. Gopel, J. Hesse, J. N. Zemel, VCH New York, Vol. 2, pp. 341-428, 1991.10.1002/9783527619269.ch8a
[2]D. N. Chavan, V. B. Gaikwad, D. D. Kajale, Ganesh E. Patil, G. H. Jain, “Nano Agdoped In2O3 thick film: A low temperature H2S gas sensor”, Journal of Sensors, Vol. 2011, Article ID 824215, 8 pages doi:10.1155/2011/824215.10.1155/2011/824215
[3]J. E. Sundeen, R. C. Buchanan, Electrical properties of nickel-Zirconia cermets films for temperature and flow sensors application, Sensors and Actuators A, Vol. 63, No. 1, 1997, pp. 33-40.10.1016/S0924-4247(97)80426-8
[4]G. E Patil, D. D. Kajale, P. T. Ahire, D. N. Chavan, N. K. Pawar, S. D. Shinde, V. B. Gaikwad and G. H. Jain, “Synthesis, characterization and gas sensing performance of SnO2 thin films prepared by spray pyrolysis”, Bulletin of Material Science. Vol. 34, No. 1, February 2011, pp. 1–9.10.1007/s12034-011-0045-0
[6]Francismenil, Helene Debeda, Claude lucat,Screen printed thickfilms:from functional material to functional devices, Jpurnal of the Europian Ceramic Society, 25 (2005) 21052113.
[7]Ganesh E. Patil, D. D. Kajale, V. B. Gaikwad, N. K. Pawar and G. H. Jain, “Properties and Gas Sensing Mechanism Study of CTO Thin Films as Ethanol Sensor”, Sensors & Transducers Journal, Vol. 137, Issue 2, February 2012, pp. 47-58.
[8]Pavel Shuk, Ed Bailey, Ulrich Guth, “Zirconia Oxygen Sensor for the Process Application”, Sate-of-the Art, Sensors and Transducers, Vol. 90, Special issue, April 2008, pp. 174-184.
[9]J. Riegel, H. Neumann, H. M. Wiedenmann, “Exhaust gas sensors for automotive emission control”, Solid state Ionics, Vol. 152 -153, 2002, pp. 783-800.10.1016/S0167-2738(02)00329-6
[12]M. E. Manriquez, T. Lopez, R. Gomez, “Preparation of TiO 2 -ZrO2 mixed oxides with controlled acid-base properties”, J. Molecular Catalysis A: Chemical, Vol. 220, 2004, pp.229-237.10.1016/j.molcata.2004.06.003
[13]Sung Ho Lee and Tae Yung Song, “Kinetics of gas phase oxygen control system and oxygen concentration measurement in liquid Pb and LBE”, J. Ind. Eng. Chem., Vol. 13, No. 4, 2007, pp. 602-607.
[15]P. Peshev, Stambolova, S. Vassilev, P. Stefanov, V. Blaskov, K. Starbova, N. Starbov, “Spray pyrolysis deposition of nanostructured ziconia thin films”, Material Science and Engineering B, Vol. 97, 2003, pp. 106 -110.10.1016/S0921-5107(02)00394-X
[18]G. Reyna Garacia, M. Garacia - Hipolito, J. Guzman - Mendoza, M.Aguilar - Frutis, C. Falcony, “Electrical, optical and structural chacterization of high - k dielectric ZrO2 thin films deposited by the pyrosol technique”, Journal of Material Science: Materials in Electronics 15, pp. 439-446, 200410.1023/B:JMSE.0000031598.04081.fd
[19]N. Yamazoe, Y. Kurokawa, T. Seiyama, “Effect of additives on semiconductor gas sensors’, Sens and Actuators B, Vol. 8, 1983, p.28310.1016/0250-6874(83)85034-3
[20]O. K. Tan, W. Cao, W. Zhu, J. W. Chai, J. S. Pan, Ethanol Sensors based on nanosized α- Fe2O3, with SnO2, ZrO2, TiO2 Solid solution, Sensors and Actuators B, Vol. 93, 2003, pp. 396-401.10.1016/S0925-4005(03)00191-6
[21]P. T. Mosely, New trends and future prospects of thick and thin film gas sensors, Sensors and Actuators B, Vol. 3, 1991, pp.162.10.1016/0925-4005(91)80002-2
[22]D. H. Aguilar, L. C. Torres-Gonzalez, and L. M. Torrres-Martines, Study of the crystallinization of ZrO2 in sol-Gel system: ZrO2 -SiO2, Journal Solid Chemistry, Vol. 5, pp. 349-57, 2000.10.1006/jssc.2001.9126
[25]Ali H. Ataiwi, Alaa A. Abdul - Hamead, “Study some of the structure properties of ZrO2 ceramic coats prepared by spray pyrolysis method”, Eng. and Tech. Journal, Vol. 27, No. 16, pp. 2918-2930, 2009.
[26]S. Takada, Relation between optical property and crystallinity of ZrO2 thick films prepared by R.F. Magnetron sputerrring, J. Applied Phy., Vol.73, No. 10, 1993, pp. 4739.10.1063/1.354091
[27]John V. Spirig, Ramasamy Ramamoorthy, Sheikh A. Akbar, Jules L. Routbort, Dileep Singh, Prabir K. Dutta, “High temperature Zirconia oxygen sensor with sealed metal/metal oxide internal reference”, Sensors and Actuators B, Vol. 124, 2007, pp. 192201.10.1016/j.snb.2006.12.022
[28]G. H. Jain, V. B. Gaikwad, D. D. Kajale, R. M. Chaudhari, R. L. Patil, N. K. Pawar, M. K. Deore, S. D. Shinde and L. A. Patil, “Surface modified BaTiO3 thick film resistors as H2S gas,” Sensors and Tranducers, Vol. 90, Special issue, April 2008, pp. 160-173.
[29]K. M. Garakar, B. S. Shirke, Y. B. Pati and D. R. Patil, “Nanostructured ZrO 2 thick film resistors as H 2 gas sensors operable at room temperature”, Sensors and Tranducers, Vol. 110, Issue 11, pp. 17-25, Nov..2009.
[30]S. S. Sunu, E. Prabhu, V. Jayaraman, K. I. Gnanasekar, T. K. Seshagiri, T. Gnanasekaram, Electrical conductivity and gas sensing properties of MoO 3 ,Sens. Actuators B, Vol. 101, 2004, pp.161-174.10.1016/j.snb.2004.02.048
[31]C. P. Chen, T. K. Tesena, S. C. Tsai, C. K. Lin, H. M. Lin, Effect of precursor characteristics on zirconia and ceria particle morphology in spray pyrolysis, Ceramic International, Vol.3, 2006, pp.8.
[32]V. A. Chaudhari, I. S. Mulla, K. Vijay Mohan, “Selective hydrogen sensing properties of surface functionalized Tin oxide”, Sensors and Actuators, B, Vol. 55, pp. 154-160, 1999.10.1016/S0925-4005(99)00056-8
[33]S. D. Shinde, G. E. Patil, D. D. Kajale, V. B. Gaikwad and G. H. Jain, “Synthesis of ZnO nanorods by spray pyrolysis for H2S gas sensor”, Journal of Alloys and Compounds, Vol. 528, 2012, pp. 109-114.10.1016/j.jallcom.2012.03.020
[34]M. Caglao, T. Caglar, S. Ilican, The determination of the thicknesses and optical constants of the ZnO Crystalline thin film by using envelope method, Journal of optoelectronics and advanced materials, Vol. 8, No.4, August 2006,pp.1410-1413
[35]S. D. Shinde, G. E. Patil, D. D. Kajale, V. B. Gaikwad and G. H. Jain, “Synthesis of ZnO nanorods for gas sensor applications”, International Journal on Smart Sensing and Intelligent System, Vol. 5, No. 1, March 2012, pp. 57-70.10.21307/ijssis-2017-470
[37]S. C. Gadkari, Manmeet Kaur, V. R. Katti, V. B. handarkar, K. P. Mutha and S. K. Gupta, “Solid State Sensors for toxic gases”, Founders day special issue, BARC, 2005, pp. 4960,
[38]G. Sberveglier, G. Groppelli, and P. Nelli,”Highly sensitive and selective Nox and NO2 sensors based on Cd-Doped SnO2 thin film, Sens. Actuators B., Vol.4, pp.457-460, 1991.10.1016/0925-4005(91)80151-9
[39]X. Liu, Z. Xu, Y. Liu and Y. Sherr, A novel high performance ethanol gas sensors based on CdO.Fe2O3 semiconducting materials, Sens. Actuators B, Vol. 52, pp. 270-273, 1998.10.1016/S0925-4005(98)00278-0
[40]J. A. Rodriguez, I. Jimenez, A. Cirera, J. Cerda, and J. R. Morante, Gas sensing properties of sprayed films of (CdO)x(ZnO)1-x mixed oxide, IEEE sensors Journal, Vol.5, No.1, Feb.2005.10.1109/JSEN.2004.838664
[42]C. Xiang feng, L. Xingqin and M. Guangyao, Effects of CdO dopant on the gas sensitivity properties of ZnFe2O4 semiconductors, Sens. Actuators B, Vol. 65, 2000, pp. 64-67.10.1016/S0925-4005(99)00430-X