Continuous Time Identification and Decentralized Pid Controller of an Aerothermic Process
References
- M. Ramzi, H. Youlal and M. Haloua, “State Space Model Predictive Control of an Aerothermic Process with Actuators Constraints,” Intelligent Control and Automation, Vol. 3 No. 1, 2012, pp. 50-58.
- N. Bennis, J. Duplaix, G. Enéa, M. Haloua, H. Youlal, “Greenhouse climate modelling and robust control”, Computers and Electronics in Agriculture, 2008, Vol. 61, pp. 96-107.
- M. Nachidi, F. Rodriguez, F. Tadeo, J.L. Guzmanb, “Takagi-Sugeno control of nocturnal temperature in greenhouses using air heating”, ISA Transactions, 2011, Vol. 50, pp. 315-320.
- R.F. Escobar, et al., “Sensor fault detection and isolation via high-gain observers: Application to a double-pipe heat exchanger”, ISA Transactions, Volume 50, Issue 3, July 2011, pp. 480-486.
- M.F. Rahmat, N.A. Mohd Subha, Kashif M.Ishaq and N. Abdul Wahab, “Modeling and controller design for the VVS-400 pilot scale heating and ventillation system”, International journal on smart sensing and intelligent systems, December 2009, Vol. 2, No. 4, pp. 579-601.
- E. Yesil, M.Guzelkaya, I.Eksin, O. A. Tekin, “Online Tuning of Set-point Regulator with a Blending Mechanism Using PI Controller”. Turk J Elec Engin, 2008, Vol.16, No. 2, pp. 143-157
- T. Kealy, A. O’Dwyer, “Closed Loop Identification of a First Order plus Dead Time Process Model under PI Control”, Proceedings of the Irish Signals and Systems Conference, University College, Cork, 2002, pp. 9-14.
- R. Mooney and A. O’Dwyer, “A case study in modeling and process control: the control of a pilot scale heating and ventilation system”, Proceedings of IMC-23; the 23rd International Manufacturing Conference, University of Ulster, Jordanstown, August, 2006, pp. 123-130.
- H.L. Ho, A.B. Rad, C.C. Chan and Y.K. Wong, “Comparative studies of three adaptive controllers”, ISA Transactions 38, 1999, pp 43-53.
- D.M. de la Pena, D.R. Ramirez, E.F. Camacho, T. Alamo, “Application of an explicit min-max MPC to a scaled laboratory process”, Control Eng. Practice, Vol. 13, No. 12, 2005, pp. 1463-1471.
- Manual for ERD004000 Flow and Temperature process, 78990 ELANCOURT, FRANCE, 2008.
- H. Garnier, M. Gilson, T. Bastogne, and M. Mensler, “CONTSID toolbox: a software support for continuous-time data-based modelling. In Identification of continuous time models from sampled data”, H.Garnier and L. Wang (Eds.), Springer, London, 2008, pp. 249290.
- G. P. Rao and H. Unbehauen, “Identification of continuous time systems” IEE Proceedings Control Theory and Appl, March 2006, 153 No. 2, pp. 185-220
- V. Laurain, M. Gilson, H. Garnier, and P.C. Young. “Refined instrumental variable methods for identification of Hammerstein continuous-time Box-Jenkins models”, IEEE Conference on Decision and Control (CDC’2008), Cancun (Mexico), December 2008, pp. 1386-1391
- Ljung, L. “Initialisation aspects for subspace and output error identification methods”, European Control Conference (ECC2003), Cambridge (U.K.), December 2003.
- H. Garnier, L. Wang, and P.C. Young, “Direct Identification of Continuous-time Models from Sampled Data: Issues, Basic Solutions and Relevance in Identification of continuoustime models from sampled data”, Springer, London, 2008, pp. 1-29.
- Hugues Garnier, “Data-based continuous-time modelling of dynamic systems”, 4th International Symposium on Advanced Control of Industrial Processes, Adconip China 2011, pp. 146-153
- V. Laurain, M. Gilson, R. Toth, H. Garnier, “Direct identification of continuous-time LPV models”, American Control Conference, 2011, pp. 159-164
- Young, P.C. “An instrumental variable method for real time identification of a noisy process”. Automatica, 6, 1970, pp. 271-287.
- Young. P.C, “Recursive Estimation and Time-Series Analysis”, Springer-Verlag, Berlin, 1984.
- Tham, M.T. (1999). “Multivariable Control: An Introduction to Decoupling Control”. Department of Chemical and Process Engineering, University of Newcastle upon Tyne.
- Dale E. Seborg, Thomas F. Edgard, Duncan A. Mellichamp, “Process dynamics and control”, Second edition, 2004 John Wiley & sons, pp. 473-502
- William Y. Svrcek, Donald P. Mahoney, Brent R. Young, “A Real-Time Approach to Process Control”, Second Edition, 2006, John Wiley & Sons Ltd, pp. 215-234
- Branislav T. Jevtovica, Miroslav R. Matausek, “PID controller design of TITO system based on ideal decoupler”, Journal of Process Control, 2010, Vol. 20, pp. 869–876
- T. Nguyen L. Vu and M. Lee “Independent design of multi-loop PI/PID controllers for interacting multivariable processes”, Journal of Process Control 20, 2010, pp. 922–933
- Guillermo J., Silva Aniruddha Datta and S.R Bhattacharyya, “PID Controllers for TimeDelay Systems”, 2005 Birkhauser Boston, pp. 1-19
DOI: https://doi.org/10.21307/ijssis-2017-491 | Journal eISSN: 1178-5608
Language: English
Page range: 487 - 503
Accepted on: May 9, 2012
Published on: Jun 1, 2012
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2012 M. Ramzi, H. Youlal, M. Haloua, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.