LabVIEW Based Characterization and Optimization of Thermal Sensors
References
- Yoshihito Kurazumi, Tadahiro Tsuchikawa, Jin Ishii, Kenta Fukagawa, Yoshiaki Yamato and Naoki Matsubara, “Radiative and convective heat transfer coefficients of the human body in natural convection,” Building and Environment, Volume 43, Issue 12, 2008, pp. 2142-2153.
- ibrahim Gülseren and John N. Coupland, “Ultrasonic properties of partially frozen sucrose solutions,” Journal of Food Engineering, Volume 89, Issue 3, 2008, pp. 330-335.
- Shinji Miyata, Bernd-Robert Höhn, Klaus Michaelis and Oliver Kreil, “Experimental investigation of temperature rise in elliptical EHL contacts,” Tribology International, Volume 41, Issue 11, 2008, pp. 1074-1082.
- P. Sazama, H. Jirglová and J. D?deček, “Ag-ZSM-5 zeolite as high-temperature water-vapor sensor material,” Materials Letters, Volume 62, Issue 7, 2008, pp. 4239-4241.
- Bharathi Bai J. Basu and N. Vasantharajan, “Temperature dependence of the luminescence lifetime of a europium complex immobilized in different polymer matrices,” Journal of Luminescence, Volume 128, Issue 10, 2008, pp. 1701-1708.
- Jianwei Shen and Yonghang Shen, “Investigation on the structural and spectral characteristics of deposited FBG stacks at elevated temperature,” Sensors and Actuators A: Physical, Volume 147, Issue 1, 2008, pp. 99-103.
- R. Van Nieuwenhove and L. Vermeeren, “Irradiation effects on temperature sensors for ITER application,” Rev. Sci. Instrum., Volume 75, 2004, pp. 75.
- J. Sanjuán, A. Lobo, M. Nofrarias, J. Ramos Castro and P. J. Riu, “Thermal diagnostics frontend electronics for LISA Pathfinder,” Rev. Sci. Instrum., Volume 78, 2007, pp. 104904.
- Andrew S. Farmer, David P. Fries, William Flannery and John Massini, “Hand-held thermalregulating fluorometer,” Rev. Sci. Instrum., Volume 76, 2005, pp. 115102.
- W. Prost, V. Khorenko, A.C. Mofor, S. Neumann, A. Poloczek, A. Matiss, A. Bakin, A. Schlachetzki and F.J. Tegude, “High performance III/V RTD and PIN diode on a silicon (001) substrate,” Applied Physics A: Materials Science & Processing, Volume 87, Number 3, 2007.
- Jikwang Kim, Jongsung Kim, Younghwa Shin and Youngsoo Yoon, “A study on the fabrication of an RTD (resistance temperature detector) by using Pt thin film,” Korean Journal of Chemical Engineering, Volume 18, Number 1, 2001.
- Sunit Kumar Sen, “An improved lead wire compensation technique for conventional two wire resistance temperature detectors (RTDs),” Measurement, Volume 39, Issue 5, (2006), pp. 477-480.
- Muhammad Imran and A. Bhattacharyya, “Thermal response of an on-chip assembly of RTD heaters, sputtered sample and microthermocouples,” Sensors and Actuators A: Physical, Volume 121, Issue 2, 2005, pp. 306-320
. - L.R. Klopfenstein Jr., “Software linearization techniques for thermocouples, thermistors, and RTDs,” ISA Transactions, Volume 33, Issue 3, 1994, pp. 293-305.
- Liang Dong, Ruifeng Yue and Litian Liu, “An uncooled microbolometer infrared detector based on poly-SiGe thermistor,” Sensors and Actuators A: Physical, Volume 105, Issue 3, Volume 2003, pp. 286-292
. - Nitya Vittal, R.C. Aiyer, C.R. Aiyer, M.S. Setty, S.D. Phadke and R.N.Karekar, “Formulation of silver loaded manganite based thermistor paste and application of 18 percolation theory for sudden transition in conductance,” J. Appl. Phys., Volume 64, 1988, pp. 5244.
- Nitya Vittal, G. Srinivasan, C.R. Aiyer and R.N. Karekar, “Correlation between X-ray diffraction studies and conductivity dependence of Ag loading in thick-film thermistors,” J. Appl. Phys., Volume 68, 1990, pp. 1940.
- Shweta Jagtap, Sunit Rane, Suresh Gosavi and Dinesh Amalnerkar, “Preparation, characterization and electrical properties of spinel-type environment friendly thick film NTC thermistors,” Journal of the European Ceramic Society, Volume 28, Issue 13, 2008, pp. 25012507
. - C. Molina, L. Victoria and J.A. Ibáñez, “Measurement of volume flow through a microporous membrane by a NTC thermistor miniature bead
,” Rev. Sci. Instrum., Volume 65, 1994, pp. 2726. - Xinyu Liu, Ying Luo and Xvqiong Li, “Electrical properties of BaTiO3-based NTC ceramics doped by BaBiO3 and Y2O3,” Journal of Alloys and Compounds, Volume 459, Issues 1-2, 2008, pp. 45-50
. - M.A. Zubair and C. Leach, “The influence of cooling rate and SiO2 additions on the grain boundary structure of Mn-doped PTC thermistors,” Journal of the European Ceramic Society, Volume 28, Issue 9, 2008, pp. 1845-1855
. - Markus Wegmann, Rolf Brönnimann, Frank Clemens and Thomas Graule, “Barium titanate- based PTCR thermistor fibers: Processing and properties,” Sensors and Actuators A: Physical, Volume 135, Issue 2, 2007, pp. 394-404
. - Marko Hrovat, Darko Belavič, Jaroslaw Kita, Janez Holc, Jena Cilenšek, Leszek Golonka and Andrzej Dziedzic, “Thick-film PTC thermistors and LTCC structures: The dependence of the electrical and microstructural characteristics on the firing temperature,” Journal of the European Ceramic Society, Volume 27, Issue 5, 2007, pp. 2237-2243.
DOI: https://doi.org/10.21307/ijssis-2017-466 | Journal eISSN: 1178-5608
Language: English
Page range: 726 - 739
Submitted on: Oct 1, 2011
Accepted on: Nov 20, 2011
Published on: Dec 6, 2011
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2011 Nasrin Afsarimanesh, Pathan Zaheer Ahmed, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.