An Approach Towards Development Of Pmv Based Thermal Comfort Smart Sensor

Anuj Kumar; I. P. Singh; S. K. Sud

doi:10.21307/ijssis-2017-412

.blurhash-client-img { display: none !important; }

An Approach Towards Development Of Pmv Based Thermal Comfort Smart Sensor

International Journal on Smart Sensing and Intelligent Systems

Volume 3 (2010): Issue 4 (January 2010)

By: Anuj Kumar, I. P. Singh and S. K. Sud

Open Access

|Dec 2017

Abstract

ASHRAE 55-2004 and ISO 7730 standards failed to predict actual comfort level and lead to oversize design of HVAC system. So proper thermal environment monitoring is an important subject to have right size of HVAC systems. A prototype thermal EM system has been developed. Thermal environment parameters such as: temperature, relative humidity, CO and CO₂ are measured by using the developed system. These data are used to calculate the thermal comfort index. The subjective judgments and the calculated PMV are compared with the results. The results showed the possibility of using PMV based thermal comfort smart sensor.

References

A. Mahdavi and S. Kumar, “Implications of indoor climate control for comfort, energy and environment”, Energy and Buildings, vol. 24, No. 3, 1996, pp. 167-177.10.1016/S0378-7788(96)00975-9
Search in Google Scholar Back to article
M. K. Singh, S. Mahapatra and S. K. Atreya, “Bioclimatism and vernacular architecture of north-east India”, Building and Environment, vol. 44, No. 5, 2009, pp. 878-888.10.1016/j.buildenv.2008.06.008
Search in Google Scholar Back to article
H. Feriadi and N. H. Wong, “Thermal comfort for naturally ventilated houses in Indonesia”, Energy and Buildings, Vol. 36, No. 7, 2004, pp. 614-626.10.1016/j.enbuild.2004.01.011
Search in Google Scholar Back to article
R. J. Dear de and G. S. Brager, “Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55”, Energy and Buildings, Vol. 34, No. 6, 2002, pp. 549-561.10.1016/S0378-7788(02)00005-1
Search in Google Scholar Back to article
G. S. Brager and R. J. Dear de, “Thermal adaptation in the built environment: a literature Review”, Energy and Buildings, Vol. 27, No. 1, 1998, pp. 83-96.10.1016/S0378-7788(97)00053-4
Search in Google Scholar Back to article
P. O. Fanger, “Thermal environment - human requirements”, The Environmentalist Vol. 6, No. 4, 1986, pp. 275-278.10.1007/BF02238059
Search in Google Scholar Back to article
ISO. Moderate thermal environment - determination of PMV and PPD indices and specifications of the conditions for thermal comfort, ISO 7730, Geneva: International Organization for Standardization, 1994.
Search in Google Scholar Back to article
Thermal environmental conditions for human occupancy, American Society of Heating, Refrigerating and Air-conditioning Engineers Inc., ASHRAE 55-2004.
Search in Google Scholar Back to article
J. F. Nicol and M. A. Humphreys, “Adaptive thermal comfort and sustainable thermal standards for buildings”, Energy and Buildings, Vol. 34, No. 6, 2002, pp. 563-572.10.1016/S0378-7788(02)00006-3
Search in Google Scholar Back to article
M. A. Humphreys and J. F. Nicol, “The validity of ISO-PMV for predicting comfort votes in every-day thermal environments”, Energy and Buildings, Vol. 34, No. 6, 2002, pp. 667-684.10.1016/S0378-7788(02)00018-X
Search in Google Scholar Back to article
M. Fountain, G. Brager and R. J. de Dear, “Expectations of indoor climate control”, Energy and Buildings, Vol. 24, No. 3, 1996, pp. 179-182.10.1016/S0378-7788(96)00988-7
Search in Google Scholar Back to article
T. M. Wang, I. J. Liao, J. C. Liao, T. W. Suen and W. T. Lee, “An intelligent fuzzy controller for air condition with zigbee sensors”, International Journal on Smart Sensing and Intelligent Systems, Vol. 2, No. 4, December 2009, pp. 636-652.10.21307/ijssis-2017-372
Search in Google Scholar Back to article
K. W. Mui and W. T. Chan, “Building calibration for IAQ management,” Building and Environment, Vol. 41, No. 7, 2006, pp. 877-886.10.1016/j.buildenv.2005.04.019
Search in Google Scholar Back to article
K. W. D. Cheong and H. Y. T. Lau, “Development and application of an indoor air quality audit to an air-conditioned tertiary institutional building in the tropics”, Building and Environment, Vol. 38, No. 4, 2003, pp. 605-616.10.1016/S0360-1323(02)00183-X
Search in Google Scholar Back to article
K. W. Mui and L. T. Wong, “Evaluation of neutral criterion of indoor air quality for air conditioned offices in subtropical climates”, Building Services Engineering Research and Technology, Vol. 28, No. 1, 2007, pp. 23-33.10.1177/0143624406070666
Search in Google Scholar Back to article
P. S. Hui, L. T. Wong and K. W. Mui, “Using carbon dioxide concentration to assess indoor air quality in offices”, Indoor Built Environment, Vol. 17, No. 3, 2008, pp. 213-219.10.1177/1420326X08091773
Search in Google Scholar Back to article
A. C. K. Lai, K. W. Mui, L. T. Wong and L. Y. Law, “An evaluation model for indoor environment quality (IEQ) acceptance in residential buildings,” Building and Environment, 2009, doi: 10.1016/j.enbuild.2009.03.016.10.1016/j.enbuild.2009.03.016
Search in Google Scholar Back to article
T. Goto, J. Toftum, R. Dear de and P. O. Fanger, “Thermal sensation and comfort with transient metabolic rates, In: H. Levin (Ed.)”, The 9th international conference on indoor air quality and climate, Santa Cruz, CA – 1, 2002, pp. 1038-1043.
Search in Google Scholar Back to article
R. V. Andersen, J. Toftum, K. K. Andersen and B. W. Oleses, “Survey of occupant behavior and control of indoor environment in Danish dwellings”, Energy and Buildings, Vol. 41, No. 1, 2009, pp. 11-16.10.1016/j.enbuild.2008.07.004
Search in Google Scholar Back to article
G. Havenith, I. Holmer and K. Parsons, “Personal factors in thermal comfort assessment: clothing properties and metabolic heat production”, Energy and Buildings, Vol. 34, No. 6, 2002, pp. 581-591.10.1016/S0378-7788(02)00008-7
Search in Google Scholar Back to article
J. Fraden, “Handbook of modern sensors: physics, designs and applications”, 3rd edition. Springer: AIP press, 2006.
Search in Google Scholar Back to article
D. D. Lee and D. S. Lee, “Environment gas sensors”, IEEE Sensors Journal, Vol. 1, No. 3, 2001, pp. 214-215.10.1109/JSEN.2001.954834
Search in Google Scholar Back to article
L. T. White, “Hazardous gas monitoring: a guide for semiconductor and other hazardous occupancies”, 5^th edition, William Andrew publications, ISBN: 0-81551469-7.
Search in Google Scholar Back to article
J. Chou, “Hazardous gas monitors: a practical guide to selection, operation and applications, SciTech Publishing, 2000.
Search in Google Scholar Back to article
N. Kularatna and B. H. Sudantha, “An environmental air pollution monitoring system based on the IEEE 1451 standard for low cost requirements”, IEEE Sensors Journal, Vol. 8, No. 4, 2008, pp. 415-422.10.1109/JSEN.2008.917477
Search in Google Scholar Back to article
Website: Figaro Engineering Inc. http://www.figaro.co.jp/en/make_html/item_2_sen_112225.html (accessed on Dec 3, 2008)
Search in Google Scholar Back to article
A. Kumar, I. P. Singh and S. K. Sud, “Indoor environment gas monitoring system based on the digital signal processor”, IEEE proceeding on multimedia, signal processing and communication technology, 2009, pp. 245-249.10.1109/MSPCT.2009.5164221
Search in Google Scholar Back to article
S. Muhic and V. Butala, “The influence of indoor environment in office buildings on their occupants: expected-unexpected”, Building and Environment, Vol. 39, No. 3, 2004, pp. 289-296.10.1016/j.buildenv.2003.09.011
Search in Google Scholar Back to article
L. W. Tse and W. L. Chan, “Real time measurement of thermal comfort by using an open network technology”, Measurement, Vol. 40, No. 6, 2007, pp. 654-664.10.1016/j.measurement.2006.07.005
Search in Google Scholar Back to article
D. Day and S. Munshi, “Simulation studies on a new intelligent scheme for relative humidity and temperature measurement using thermistor in 555 time circuit”, International Journal on Smart Sensing and Intelligent Systems, Vol. 3, No. 2, June 2010, pp. 217-229.10.21307/ijssis-2017-389
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.21307/ijssis-2017-412 | Journal eISSN: 1178-5608

Journal RSS Feed

Language: English

Page range: 621 - 642

Published on: Dec 13, 2017

Published by: Macquarie University, Australia

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

Predicted mean vote (PMV),

Environment monitoring system (EMS),

Indoor environment quality,

Thermal comfort index

Related subjects:

Engineering,

Introductions and overviews,

Engineering, other

© 2017 Anuj Kumar, I. P. Singh, S. K. Sud, published by Macquarie University, Australia
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 3 (2010): Issue 4 (January 2010)