Micro-Generator Design for Smart Grid System (Comparative Study)
By:
References
- Ali Keyhani, Mohammad N. Marwali, and Min Dai, “Integration of Green and Renewable Energy in Electric Power Systems,“Text Book, Wiley, January 2010
- Ali Keyhani, “Cyber-Controlled Smart Microgrid Systems of the Future: The High Penetration of Renewable and Green Energy Sources”, New Research Directions for Future Cyber-Physical Energy Systems Conference, Sheraton Baltimore City Center Hotel Baltimore, Maryland, pp. 1-3, June 2009
- Ali Keyhani, Jin-Woo Jung, Min Dai, “Control of Renewable Energy Sources in Smart Grid Systems,” Smart Grids Africa Conference, pp. 1-13, 28-30 July 2008, Johannesburg, South Africa
- Ahmad, R. A., Pan, Z., and Saban, D. M., “On-Board Electrical Network Topology Using High Speed Permanent Magnet Generators,” Electric Ship Technologies Symposium, 2007. ESTS apos;07. IEEE Volume , Issue , 21-23, pp.356 – 362, May 2007.
- Scridon, S., Boldea, I., Tutelea, Blaabjerg, L., F., and Ritchie, E., “BEGA – A Biaxial Excitation Generator for Automobiles: Comprehensive Characterization and Test Results,” IAS, 2004, Industry Applications Conference, 2004. 39th IAS Annual Meeting Conference Record of the 2004 IEEE, vol.3, pp. 1682 – 1690, 3-7 Oct. 2004.
- Binder, A., Schneider, T., and Klohr, M., “Fixation of Buried and Surface- Mounted Magnets in High-Speed Permanent-Magnet Synchronous Machines,” IEEE Trans. On Industry Applications, Vol. 42, NO. 4, pp. 1031 – 1037, July/August, 2006.
- Hosseini, S. M., Mirsalim, M. A., and Mirzaei, M. , “Design, Prototyping, and Analysis of a Low Cost Axial-Flux Coreless Permanent-Magnet Generator,” IEEE Trans. On Magnet., Vol. 44, No. 1, pp. 75 – 80, Jan. 2008.
- Mellor, P.H., Burrow, S.G., Sawata, T., and Holme, M., “A Wide – Speed – Range Hybrid Variable – Reluctance / Permanent – Magnet Generator for Future Embedded Aircraft Generation Systems,” IEEE Trans. On Industry Applications, Vol. 41, No. 2, pp. 551 – 556, March/April 2005.
- Sadeghierad, M., Lesani, H., Monsef, H., and Darabi, A., “Design considerations of High Speed Axial Flux permanent magnet Generator with Coreless Stator,” The 8th International Power Engineering Conference (IPEC), pp. 1098 – 1102, 2007.
- Arnold, D. P., Das, S., Park, J. W., Zana, I., Lang, J. H., and Allen, M. G., “Micro fabricated High-Speed Axial-Flux Multi watt Permanent- Magnet Generators—Part II: Design, Fabrication, and Testing,” Journal Of Micro Electromechanical Systems, Vol. 5, No. 5, pp. 1351 – 1363, October 2006.
- Paulides, J. J. H., Jewell, G. W., and Howe, D., “An Evaluation of Alternative Stator Lamination Materials for a High – Speed, 1.5 MW, Permanent Magnet Generator,” IEEE Trans. On Magnetics, Vol. 40, No. 4, pp. 2041 - 2043, July 2004.
- Jang, S. M., Cho, H. W., and Jeong, Y. H., “Influence on the rectifiers of rotor losses in high – speed permanent magnet synchronous alternator,” Journal of Applied Physics, 08R315, American Institute of Physics, 08R315-1 – 08R315-3, pp. 1-3, 2006.
- Kolondzovski, Z., “Determination of critical thermal operations for High – speed permanent magnet electrical machines,” The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 27 No. 4, pp. 720-727, 2008.
- Nagorny, A. S., Dravid, N. V., Jansen, R. H., and Kenny, B. H., “Design Aspects of a High Speed Permanent Magnet Synchronous Motor / Generator for Flywheel Applications,” NASA/TM—2005-213651 June 2005, International Electric Machines and Drives Conference sponsored by the IEEE Industry Applications Society, IEEE Power Electronics Society, IEEE Power Engineering Society, and IEEE Industrial Electronics Society, San Antonio, Texas, May 15–18, 2005.
- Hanselmann, D. C., Brushless Permanent Magnet Motor Design, Text Book, New York: McGraw-Hill, 1994.
- Hendershot, J. R. and Miller, T. J. E., Design of Brushless Permanent Magnet Motors, Text Book, Oxford, U.K.: Magna Physics Publishing and Clarendon Press, 1994.
- Rucker, J. E., Kirtley, J. L., McCoy, Jr. T. J., “Design and Analysis of a Permanent Magnet Generator For Naval Applications,” IEEE Electric Ship Technologies Symposium, pp. 451 – 458, 2005.
- Kang, D., Curiac, P., Jung, Y., and Jung, S., “Prospects for magnetization of large PM rotors: conclusions from a development case study,” IEEE trans. On Energy Conversion, vol. 18, no. 3, pp. 409-416, Sept. 2003.
- Paulides, J., Jewell, G., and Howe, D., “An evaluation of alternative stator lamination materials for a high speed, 1.5 MW, permanent Magnet Generator,” IEEE Trans. On Magnetics, vol. 40, no. 4, pp. 2041-2043, July 2004.
- Bianchi, N., and Lorenzoni, A., “Permanent magnet generators for wind power industry: an overall comparison with traditional generators,” Opportunities and advances in international power generation, conference publication No. 419, pp. 49-54, 1996.
- Rahman, M. A., and Slemon, G. R., “Promising Applications of Neodymium Iron Boron Iron Magnets in Electrical Machines,” IEEE Trans. On Magnetics, Vol. No. 5, pp. 1712-1716, Sept 1985.
- Polinder, H. and Hoeijmakers, M. J., “Eddy – Current Losses in the Segmented Surface Mounted Magnets of a PM Machine,” IEE Proceedings, Electrical Power Applications, Vol. 146, No. 3, pp. 261-266, May 1999.
- Aglen, O., and Andersson, A., “Thermal Analysis of a High Speed Generator,” Industry Applications Conference, 38th IAS Annual Meeting. Con. vol.1, pp. 547- 554, 12-16 Oct. 2003. Current Version Published: 2004-01-07 IEEE Transactions, 2003.
- Pepi, J., and Mongeau, P., “High power density permanent magnet generators,” Text Book, DRS Electric power technologies, Inc., 2004.
- Kong X., Wang F., and Sun Y. “Comparison of High Speed PM Generator with PM Doubly Fed Reluctance Generator for Distributed Power Generation System”, 2nd IEEE Conference on Industrial Electronics and Applications, 2007. ICIEA 2007, pp. 1193 – 1197, 2007.
- I. Boldea and S. A. Nasar, Induction Machine Handbook, Text Book, CRC Press, Boca Raton, Fl, 2001.
- B. Amin, “Contribution to iron-loss evaluation in electrical machines”, European Trans. on Elect. Power Eng., vol. 5, pp. 325-332, 1995.
- Z.Q. Zhu, D. Howe, E. Bolte, B. Ackermann, “Instantaneous Magnetic Field distribution in brushless permanent-magnet dc motors, part I: open-circuit field”, IEEE Trans. on Magnetics, vol. 29, pp. 124-135, 1993.
- Z.Q. Zhu, D. Howe, “Instantaneous Magnetic Field distribution in brushless permanentmagnet dc motors, part II: armature-reaction field”, IEEE Trans. on Magnetics, vol. 29, pp. 136-142, 1993.
- Z.Q. Zhu, D. Howe, “Instantaneous Magnetic Field distribution in brushless permanentmagnet dc motors, part III: effect of stator slotting”, IEEE Trans. on Magnetics, vol. 29, pp. 143-151, 1993.
- Z.Q. Zhu, D. Howe, “Instantaneous Magnetic Field distribution in brushless permanentmagnet dc motors, part IV: magnetic field on load”, IEEE Trans. on Magnetics, vol. 29, pp. 152-158, 1993.
- J.G. Zhu, S.Y.R. Hui, V.S. Ramsden, “Discrete modelling of magnetic cores including hysteresis, eddy current, and anomalous losses”, IEE Proc., Part A, Sc., Measure. and Tech., vol. 140, pp. 317-322, 1993.
- I. Boldea, Variable speed electric generators, Text Book, CRC Press, Florida, 2006.
- J.G. Zhu, S.Y.R. Hui, V.S. Ramsden, “A generalized dynamic circuit model of magnetic cores for low- and high-frequency applications - Part I: Theoretical calculation of the equivalent core loss resistance”, IEEE Trans. Power Elect., vol. 11, pp.246-250, 1996.
- Moré, J.J. and Sorensen D.C. “Computing a Trust Region Step”, SIAM Journal on Scientific and Statistical Computing, Vol. 3, pp 553-572, 1983.
- Zhang, Y. “Solving Large-Scale Linear Programs by Interior-Point Methods Under the MATLAB Environment”, Department of Mathematics and Statistics, University of Maryland, Baltimore County, Baltimore, MD, Technical Report TR96-01, 1995.
- Pepi, J. and Mongeau, P. , High power density permanent magnet generators, Text Book, DRS Electric power technologies, Inc, 2004.
- Conn, A. R., Gould N. I. M., and Toint Ph. L. “A Globally Convergent Augmented Lagrangian Algorithm for Optimization with General Constraints and Simple Bounds”, SIAM Journal on Numerical Analysis, Volume 28, Number 2, pages 545–572, 1991.
- Conn, A. R., Gould N. I. M., and Toint Ph. L. “A Globally Convergent Augmented Lagrangian Barrier Algorithm for Optimization with General Inequality Constraints and Simple Bounds”, Mathematics of Computation, Volume 66, Number 217, pages 261–288, 1997.
- I. H. Shames, and J. M. Pitarresi, Introduction to Solid Mechanics, Text Book, 3rd Ed., Prentice Hall, 2000.
- M. F. Ashby, and D. R. H. Jones, Engineering Materials, Text Book, Pergamon Press, 1991.
- J. L. Kirtley, and E. C. Lovelace, “Drag Loss in Retaining Rings of Permanent Magnet Motors,” SatCon Technology Corporation, pp. Vol. 2, pp. 1068-1072, June 2003.
- H. Polinder and M. J. Hoeijmakers, “Eddy-Current Losses in the Permanent Magnets of a PM Machine,” EMD 97, Conference Publication No. 444, pp. 138-142, 1997.
- A.Lay-Ekuakille, G. Vendramin, A. Fedele, L. Vasanelli, A. Trotta, “PV Maximum Power Point Tracking Through Pyranometric Sensor: Modelling and Characterization”, International Journal on Smart Sensing and Intelligent Systems, Vol. 1, No. 3, pp. 659-678, Sept. 2008
- Zhu Zhen, A. Al-Mamun and Myint Phone Naing, “Control-Centric Simulator for Mechatronics Design Case Study: Gyroscopically Stabilized Single Wheel Robot”, International Journal on Smart Sensing and Intelligent Systems, Vol. 2, No. 2, pp. 190-199, June 2009.
- Shubhajit Roy Chowdhury, Dipankar Mukherjee, Hiranmay Saha, “FPGA Based Maximum Power Point Tracker of Partially Shaded Solar Photovoltaic Arrays using Modified Adaptive Perceptive Particle Swarm Optimization”, International Journal on Smart Sensing and Intelligent Systems, Vol. 2, No. 4, pp.661-675, Dec. 2009.
- S.C.Mukhopadhyay, “Prediction of Thermal Condition of Cage-Rotor Induction Motors under Non-Standard Supply Systems”, International Journal on Smart Sensing and Intelligent Systems, Vol. 2, No. 3, pp. 381-395, Sept. 2009
DOI: https://doi.org/10.21307/ijssis-2017-388 | Journal eISSN: 1178-5608
Language: English
Page range: 176 - 216
Published on: Dec 12, 2017
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2017 Adel El Shahat, Ali Keyhani, Hamed El Shewy, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.