References
- J.Ma and Y.Yan, “Design and evaluation of electrostatic sensors for the measurement of velocity of pneumatically conveyed solids”, Flow Meas. Instrum. 11, 2000, pp. 195-204.10.1016/S0955-5986(00)00019-4
- M.F.Rahmat and H.A.Sabit, “Application of neural network technique and electrodynamic sensors in identification of solid flow regimes”, Jurnal Teknologi 46(D), June 2007, pp. 77-92.
- Y.Yan, B.Byrne, S.Woodhead, and J.Coulthard, “Velocity measurement of pneumatically conveyed solids using electrodynamic sensors”, Meas. Sci. Technol Journal. 6, 1995, pp. 515537.10.1088/0957-0233/6/5/013
- C.L.Xu and S.M.Wang, “Solid particle velocity measurement based on spatial filtering effect of electrodynamic sensor”, Chin. J. Chem. Ind. Eng. 58, 2007, pp. 67-74.
- R.G.Green, M.F.Rahmat, K.Evan, A.Goude, M.Henry, and J.A.R.Stone, “Concentration profiles of dry powders in a gravity conveyor using an electrodynamic tomography system”, Meas. Sci. Technol Journal. 8, 1997, pp. 192-197.10.1088/0957-0233/8/2/014
- Y.Yan, and B.Byrne, “Measurement of solids deposition in pneumatic conveying”, Powder Technology Journal. 9, 1997, pp. 131-139.10.1016/S0032-5910(96)03249-4
- M.Machida, and B.Scarlett, “Process tomography system by electrostatic charge carried by particles”, IEEE Sensor Journal, Vol. 5 No. 2, April 2005, pp. 251-259.10.1109/JSEN.2005.843892
- C.Xu, B.Zhou, D.Yang, G.Tang, and S.Wang, “Velocity measurement of pneumatically conveyed solid particles using an electrostatic sensor”, Meas. Sci. Technol. Journal.19, 2008 24005.1-24005.9.10.1088/0957-0233/19/2/024005
- J.A.Cross, “Electrodynamics Principles, Problems and Applications”, Bristol: Adam Hilger, 1987.
- R.G.Green, M.F.Rahmat, K.Dutton, K.Evan, A.Goude, and M.Henry,”Velocity and mass flow rate profiles of dry powder in a gravity drop conveyor using electrodynamic tomography system”, Meas. Sci. Technol Journal. 8, 1997, pp. 429-436.10.1088/0957-0233/8/4/010
- M.F Rahmat and N.S Kamarudin, An electrodynamic sensor for electrostatic charge measurement, International Journal on Smart Sensing and Intelligent System, Vol. 2 No. 2 June 2009, page 200-212 10.21307/ijssis-2017-346