References
- Arabian-Hoseynabadi H., Oraee H., Tavner P., (2010) “Failure Modes and Effects Analysis (FMEA) for wind turbines” Electrical Power and Energy Systems 32 (2010) 817–824.
- Batunlu C. and Albarbar A., (2015) “A Technique for Mitigating Thermal Stress and Extending Life Cycle of Power Electronic Converters Used for Wind Turbines,” Electronics, vol. 4, no. 4, pp. 947–968, Nov. 2015.
- Batunlu C. and Albarbar A., (2016) “Real-time system for monitoring the electro-thermal behaviour of power electronic devices used in boost converters,” Microelectronics Reliability. vol. 62, pp. 82–90, July 2016.
- Batunlu C. and Albarbar A., (2015) “Towards More Reliable Renewable Power Systems - Thermal Performance Evaluation of DC/DC Boost Converters Switching Devices,” International Journal of Power Electronics and Drive Systems (IJPEDS), vol. 6, no. 4, pp. 876–887, Dec. 2015.
- Becker T., Kluge M., Schalk J., Tiplady K., Paget C., Hilleringmann U., and Otterpohl T., (2009) “Autonomous Sensor Nodes for Aircraft Structural Health Monitoring,” Sensors Journal, IEEE, vol. 9, no. 11, pp. 1589–1595, Nov. 2009.
- Blaabjerg F., Ma K., and Zhou D., (2012) “Power electronics and reliability in renewable energy systems,” in2012 IEEEInternational Symposium on Industrial Electronics (ISIE), 2012, pp. 19–30.
- Denk M., Bakran M.-M., Denk M., and Bakran M.-M., (2015) “Online Junction Temperature Cycle Recording of an IGBT Power Module in a Hybrid Car, Online Junction Temperature Cycle Recording of an IGBT Power Module in a Hybrid Car,” Advances in Power Electronics, Advances in Power Electronics, vol. 2015, 2015, p. e652389, Mar. 2015.
- Downing S. D. and Socie D. F., (1982) “Simple rainflow counting algorithms,” International Journal of Fatigue, vol. 4, no. 1, pp. 31–40, Jan. 1982.
- Kim Y.-J., Lee K.-C., Hwang D.-H., and Kang D.-S.,(2005) “Technologies and cost evaluation of condition monitoring and diagnosis system under ubiquitous environment,” in Proceedings of 2005 International Symposium on Electrical Insulating Materials, 2005. (ISEIM 2005), 2005, vol. 3, p. 857–860 Vol. 3.
- Natsheh E, Natsheh A, Albarbar A, (2013), Intelligent Controller for Managing Power Flow within Standalone Hybrid Power Systems. IET Science, Measurement & Technology, 7(4), 191-200.
- Natsheh E, Albarbar A, (2012). Solar Power Plant Performance Evaluation: Simulation and Experimental Validation. J. Phys.: Conf. Ser. 364 012122 doi:10.1088/1742- 6596/364/1/012122.
- Natsheh E, Albarbar A (2014), An Automated Tool for Solar Power Systems, Applied Solar Energy, 50, (4), 221-227.
- Niesłony A., (2009)“Determination of fragments of multiaxial service loading strongly influencing the fatigue of machine components,” Mechanical Systems and Signal Processing, vol. 23, no. 8, pp. 2712–2721, Nov. 2009.
- Takaishi J., Harada S., Tsukuda M., and Omura I., (2014)“Structure oriented compact model for advanced trench IGBTs without fitting parameters for extreme condition: Part II,” Microelectronics Reliability, vol. 54, no. 9–10, pp. 1891– 1896, Sep. 2014.
- Tang Y., Wang B., Chen M., and Liu B., (2012)“Simulation model and parameter extraction of Field-Stop (FS) IGBT,” Microelectronics Reliability, vol. 52, no. 12, pp. 2920–2931, Dec 2012.
- Wu R., Wen J. L., Han J., Chen Z., Wei Q., Jia N., and Wang C.,(2012) “A Power Loss Calculation Method of IGBT Three-Phase SPWM Converter,” in 2012 Second International Conference on Intelligent System Design and Engineering Application (ISDEA), 2012, pp. 1180–1183.
- Yun G. J., Lee S.-G., Carletta J., and Nagayama T., (2011)“Decentralized damage identification using wavelet signal analysis embedded on wireless smart sensors,” Engineering Structures, vol. 33, no. 7, pp. 2162–2172, Jul. 2011.