References
- Basiński W. (2018). Shear buckling of plate girders with corrugated web restrained by end stiffeners. Periodica Polytechnica Civil Engineering, 62(3), 757–771. https://doi.org/10.3311/PPci.11554.
- Basiński W. (2019). Shear buckling resistance of cantilever girders with corrugated web. Architecture Civil Engineering, Environment, 12(1), 63–79. DOI: 10.21307/ACEE-2019-006.
- Elgaaly M, Hamilton RW, Seshadri A. (1996) Shear strength of beams with corrugated webs. Journal Structural Engineering, 122(4), 390–398.
- Sayed-Ahmed EY. (2001) Behavior of steel and (or) composite girders with corrugated steel webs. Canadian Journal Civil Engineering, 28(4), 656–672.
- Sause R, Braxtan TN. (2011) Shear strength of trapezoidal corrugated steel webs. Journal of Constructional Steel Research, 67, 223–236.
- Hassanein M.F, Kharoob O.F. (2013) Behavior of bridge girders with corrugated webs: (II) Shear strength and design. Engineering Structures, 57, 544–553.
- Kuchta K. (2004). Nośność i sztywność blachownic o falistym środniku (Resistance and stiffness of plate girders with corrugated web). PhD thesis. Technical University of Cracow (in Polish).
- Siokola W. (1997). Wellstegträger Herstellung und Anwendung von Trägern mit profiliertem Steg (Corrugated web girders, production and use of profiled web girders). Stahlbau 66, 595–605.
- Protte W. (1993). Zur Gurtbeulung eines Trägers mit profiliertem Stegblech (Buckling of a girder with a web made of a profiled sheet). Stahlbau 62, 327–333.
- EN 10025-1:2007. Hot Rolled Products Of Structural Steels – Part 1: General Technical Delivery Conditions.
- EN 1993-1-1, 2003. Design of steel structures. Part 1-1: General rules and rules for buildings.
- EN-1990 Eurocode – Basis of structural design.
- Gwóźdź M., Woźniczka P. (2015). Badania statystyczne losowej zmienności cech wytrzymałościowych stalowych wyrobów hutniczych. (Statistical Tests of Random Variability of Strength Properties of Steel Products) Przegląd Budowlany, 6 (in Polish).
- Sowa A. (1980). Statystyki wytrzymałości stali a bezpieczeństwo konstrukcji. (Steel Strength Statistics and Construction Safety). Wydawnictwo Politechniki Krakowskiej. Budownictwo Lądowe, Zeszyt Naukowy, 7, Kraków (in Polish).
- Murzewski J. (1989). Niezawodność konstrukcji inżynierskich. (Reliability of Engineering Structures) Arkady, Warszawa (in Polish).
- Mendera Z. (1969). Zagadnienia stanów granicznych konstrukcji stalowych. (Limit States of Steel Structures) Wydawnictwo Politechniki Krakowskiej. Budownictwo Lądowe, Zeszyt Naukowy, 7, Kraków (in Polish).
- DASt-Richtlinie 015. (1990). Träger mit Schlanken Stegen, Deutsches Ausschuss für Stahlbau DASt, Köln (Beams with slim webs, German Committee for Steel Construction DASt, Cologne).
- EN 1993-1-5, 2008. Design of steel structures. Part 1-5: Plated structural elements.
- EN 1993-1-1, 2008. Design of steel structures. Part 1-1: General rules and rules for building.
- DIN 18800 Teil 2. (1990). Stahlbauten, Stabilitätsfälle, Knicken von Staben und Stabwerken, DIN 1990 (Steel structures, stability cases, buckling of bars and frameworks, DIN 1990).
- Yu D., Sause R. (2006). The Lateral Torsional Buckling Strength of Steel I – Girders with Corrugated Webs. ATLSS Reports. ATLSS Report No. 06-11. Leigh University.
- Sherif A. I. (2014). Lateral torsional buckling strength of unsymmetrical plate girders with corrugated webs. Engineering Structures 81. 123–134. http://dx.doi.org/10.1016/j.engstruct.2014.09.040
- Kowal Z. (2005). Zwichrzenie dźwigarów o falistym środniku pod obciążeniem montażowym. Sympozjum Kształtowanie konstrukcji, konstrukcje cięgnowe, konstrukcje z blach fałdowych. (Lateral buckling of corrugated web girders under assembly load. Symposium Shaping structures, tension structures, structures made of corrugated sheets). Rzeszów 2005, 177–186 (in Polish).
- Profiles of corrugated web of SIN girders. Principles of dimensioning. Cracow University of Technology. Cracow 2002 (in Polish).
- The research project N N506 072538 titled. (2013). Shaping frameworks girder on the corrugated web joined by end plates. Silesian University of Technology 2013 (in Polish).
- EN 10002-1:2001. Metallic materials – Tensile testing – Part 1: Method of test at ambient temperature.
- Basiński W., Kowal Z. (2018). Random strength parameters of steel corrugated webs and their influence on the resistance of SIN plate girders. Architecture Civil Engineering, Environment 11(3), 65–77. doi:10.21307/ACEE-2018-039.
- Collins I. D., Thomson I. D. (1962). The eigenvalue problem for structural systems with statistical properties, AIAA Journal, 7(4), 642–648.
- Basiński W. (2017). Wpływ podatności węzłów na przemieszczenia blachownic o środniku falistym. (Influence of Semi – Rigid Joints on the Displacement of Plate Girders with Corrugated Web) Inżynieria i Budownictwo 73(12), 655–660 (in Polish).