References
- Ferdyn-Grygierek, J. (2014). Indoor environment quality in the museum building and its effect on heating and cooling demand. Energy and Buildings, 85, 32–44.10.1016/j.enbuild.2014.09.014
- Ferdyn-Grygierek, J., Baranowski, A. (2015). Internal environment in the museum building – Assessment and improvement of air exchange and its impact on energy demand for heating. Energy and Buildings, 92, 45–54.10.1016/j.enbuild.2015.01.033
- Hurnik, M., Specjal, A., Popiolek, Z., Kierat, W. (2018). Assessment of single-family house thermal renovation based on comprehensive on site diagnostics. Energy and Buildings, 158, 162–171.10.1016/j.enbuild.2017.09.069
- Popiołek, Z., Kateusz, P. (2017). Comprehensive on site thermal diagnostics of buildings – Polish practical experience. Architecture Civil Engineering Environment, 10(2), 125–132.10.21307/acee-2017-026
- Blaszczok, M., Król, M., Hurnik, M. (2017). On-site diagnostics of the mechanical ventilation in office buildings. Architecture Civil Engineering Environment, 10(2), 145–156.10.21307/acee-2017-028
- Hurnik, M., Specjał, A., Popiołek, Z. (2017). On- site diagnosis of hybrid ventilation system in a renovated single-family house. Energy and Buildings, 149, 123–132.10.1016/j.enbuild.2017.05.034
- Hurnik, M., Blaszczok, M., Król, M. (2017). On-site thermal diagnostics of cooling sources for air conditioning systems in office buildings. Architecture Civil Engineering Environment, 10(2), 157–163.10.21307/acee-2017-029
- Specjał, A., Bartosz, D. (2017). Determination of the seasonal heat consumption based on the short- term measurements in the building. J. Build. Phys., 40(6), 544–560.10.1177/1744259116637617
- Specjał, A., Ciuman, H. (2017) On-site thermal diagnostics of heating and DHW installations. Architecture Civil Engineering Environment, 10(2), 165–173.10.21307/acee-2017-030
- Bartosz, D., Specjał, A. (2017). Estimation of the seasonal demand for cooling based on the short-term data. Architecture Civil Engineering Environment, 10(2), 133–143.10.21307/acee-2017-027
- Foit, H., Świerc, A., Foit, W. (2017). Contribution to the short measurement method for determining the thermal characteristics of existing buildings: total heat transmission coefficient estimation based on double measurement. Architecture Civil Engineering Environment, 10(1), 103–115.10.21307/acee-2017-011
- Kaczmarczyk, J. (ed.) (2013). Diagnostyka in situ środowiska wewnętrznego w budynkach, Tom 4 Poradnika diagnostyki cieplnej budynków (On-site diagnostics of indoor environment in buildings, Vol. 4 of Handbook on Thermal Diagnostics of Buildings), Gliwice, Politechnika Śląska. Wydział Inżynierii Środowiska i Energetyki, 90.
- Resolution of the Council of Ministers of 2015 on adopting “National plan to increase the number of buildings with low energy consumption” MP 2015/614 (in Polish).
- EN ISO 7726-2001: Ergonomics of the thermal environment – Instruments for measuring physical quantities. European Committee for Standardization, Brussels.
- REHVA Guidebook No. 14: Indoor climate quality assessment. Corgnati, S. P., da Silva, M. G. (Eds.). Federation of European Heating, Ventilation and Air Conditioning Associations, 2011.
- Ioannou, A., Itard, L. C. M. (2015). Energy performance and comfort in residential buildings: Sensitivity for building parameters and occupancy. Energy and Buildings, 92, 216–233.10.1016/j.enbuild.2015.01.055
- Kaczmarczyk, J. Lipczyńska, A. (2012). Evaluation of thermal conditions in two dwellings with natural ventilation. A case study. Proceedings of Healthy Buildings, Brisbane, Australia.
- EN ISO 7730-2005: Ergonomics of the thermal environment – Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. European Committee for Standardization, Brussels.
- EN 15251-2007: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. European Committee for Standardization, Brussels.